RIDGID 40818 SeeSnake nanoReel, N85S /Micro CA-300 System NTSC

Modèle: 40818 | CUP: 095691408181

RIDGID 40818 SeeSnake nanoReel, N85S /Micro CA-300 System NTSC

Modèle: 40818 | CUP: 095691408181

The nanoReel opens up new possibilities in long run small diameter inspection needs. Applications where only bore scopes could reach can now be inspected using the nanoReel system. Boiler tubes, supply lines, sprinkler systems, and a wide array of specialty applications can be inspected using the nanoReel system.

The nanoReel opens up new possibilities in long run small diameter inspection needs. Applications where only bore scopes could reach can now be inspected using the nanoReel system. Boiler tubes, supply lines, sprinkler systems, and a wide array of specialty applications can be inspected using the nanoReel system.

Prix spécial $8475.55 CAD
Prix régulier $9262.90 CAD
Disponibilité 3 à 4 semaines
Quantité

Accessoires recommandées


RIDGID 40818 offre

The nanoReel will traverse a 1 in [25 mm] straight pipe, but its ability to go past 90‑degree turns will depend on the material and construction of individual pipes and joints. Test the material you intend to inspect to ensure the camera can pass through turns successfully. Some fittings in small diameter joints will allow passage of the camera in only one direction.

Caractéristiques

  • Small diameter and tight turn radius camera allows lines up to 85' (25 m) to be inspected with tight turns in 1" (25 mm) lines
  • Lightweight and compact unit allows for easy transport and efficient storage
  • Interchangeable drums let you change out the inner drum depending on the application
  • L100/L100C – 1 1⁄2" to 5" (40 - 125 mm) lines with a stiffer push cable allowing you to inspect lines up to 100' (30 m)
  • D30 and D65S – Small diameter with tight turns, 1 1⁄2" to 4" (40 - 100 mm) P-traps, toilet traps, pool lines up to 65' (20 m)
  • N85S – Ultra small diameter lines 3⁄4" to 2" (20 - 50 mm) with tight turns for specialized applications

Spécifications pour le RIDGID 40818

Camera Head 0.62 (15.5 mm)
Cable Length 85' (25 m)
Cable Diameter 0.25 (6.3 mm)
Line Capacity ¾ to 2" (20 - 50 mm)
Weight 9.5 lbs. (4,1 kg)
Size Length 13.25" (33.7 cm), Width 6.6" (16.8 cm), Height 17.5" (44.5 cm)
Resolution 656 x 492
Ball Guide 2 included
Sonde 512 Hz
Counter Not available

Le RIDGID 40818 comprend

  • SeeSnake® nanoReel Industrial Video Inspection System
  • Operator's Manual
  • Instructional DVD
  • Ball Guides (two sizes)

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le RIDGID 40818 SeeSnake nanoReel, N85S /Micro CA-300 System NTSC.

RIDGID 37093 Tête de caméra, Ø5.08 mm, câble de 3.99 m 37093
Compatible avec les microsystèmes micro CA-350/CA-150/CA-100/CA-300, microEXPLORER et SeeSnakeMD, cette tête de caméra permet des inspections détaillées dans des espaces restreints et dispose d'une longueur de câble de 4 m (13.1').




Poser une question sur le RIDGID 40818 SeeSnake nanoReel, N85S /Micro CA-300 System NTSC

RIDGID 40818 offre

The nanoReel will traverse a 1 in [25 mm] straight pipe, but its ability to go past 90‑degree turns will depend on the material and construction of individual pipes and joints. Test the material you intend to inspect to ensure the camera can pass through turns successfully. Some fittings in small diameter joints will allow passage of the camera in only one direction.

Caractéristiques

  • Small diameter and tight turn radius camera allows lines up to 85' (25 m) to be inspected with tight turns in 1" (25 mm) lines
  • Lightweight and compact unit allows for easy transport and efficient storage
  • Interchangeable drums let you change out the inner drum depending on the application
  • L100/L100C – 1 1⁄2" to 5" (40 - 125 mm) lines with a stiffer push cable allowing you to inspect lines up to 100' (30 m)
  • D30 and D65S – Small diameter with tight turns, 1 1⁄2" to 4" (40 - 100 mm) P-traps, toilet traps, pool lines up to 65' (20 m)
  • N85S – Ultra small diameter lines 3⁄4" to 2" (20 - 50 mm) with tight turns for specialized applications

Spécifications pour le RIDGID 40818

Camera Head 0.62 (15.5 mm)
Cable Length 85' (25 m)
Cable Diameter 0.25 (6.3 mm)
Line Capacity ¾ to 2" (20 - 50 mm)
Weight 9.5 lbs. (4,1 kg)
Size Length 13.25" (33.7 cm), Width 6.6" (16.8 cm), Height 17.5" (44.5 cm)
Resolution 656 x 492
Ball Guide 2 included
Sonde 512 Hz
Counter Not available

Le RIDGID 40818 comprend

  • SeeSnake® nanoReel Industrial Video Inspection System
  • Operator's Manual
  • Instructional DVD
  • Ball Guides (two sizes)

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le RIDGID 40818 SeeSnake nanoReel, N85S /Micro CA-300 System NTSC.

RIDGID 37093 Tête de caméra, Ø5.08 mm, câble de 3.99 m 37093
Compatible avec les microsystèmes micro CA-350/CA-150/CA-100/CA-300, microEXPLORER et SeeSnakeMD, cette tête de caméra permet des inspections détaillées dans des espaces restreints et dispose d'une longueur de câble de 4 m (13.1').




Poser une question sur le RIDGID 40818 SeeSnake nanoReel, N85S /Micro CA-300 System NTSC

Plus de produits RIDGID