Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

4801 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

4801 COMMENTAIRES

Pressure Calibration Specialists

LIVRAISON GRATUITE SUR COMMANDES DE PLUS DE $199*

Pressure Calibration Specialists

Ralston QTHA-FRS0 DP Transmitter Quick-Test Adapter, 5⁄16-24 male DP transmitter, 5000 psi

Modèle: QTHA-FRS0 | No. de commande: QTHA-FRS0/A

Ralston QTHA-FRS0 DP Transmitter Quick-Test Adapter, <sup>5</sup>⁄<sub>16</sub>-24 male DP transmitter, 5000 psi-

Télécharger: datasheet

Plus de produits Ralston

Demander à un expert

Ralston QTHA-FRS0 DP Transmitter Quick-Test Adapter, 5⁄16-24 male DP transmitter, 5000 psi

Modèle: QTHA-FRS0 | No. de commande: QTHA-FRS0/A

Unique and reliable, this adapter allows users to connect a Quick-test hose directly to a DP transmitter or gauge valve using the bleeder port when the transmitter is not on a 3-valve manifold, or when the manifold is not accessible. Dependable, this adapter makes a metal-to-metal seal on the transmitter or gauge valve.

Unique and reliable, this adapter allows users to connect a Quick-test hose directly to a DP transmitter or gauge valve using the bleeder port when the transmitter is not on a 3-valve manifold, or when the manifold is not accessible. Dependable, this adapter makes a metal-to-metal seal on the transmitter or gauge valve.

Discontinué!

Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :

Ralston QTHA-FRS0 Adaptateur Quick-test pour transmetteur DP, 5 000 psi, <sup>5</sup>⁄<sub>16</sub>"-24 UNF-

Ralston QTHA-FRS0 Adaptateur Quick-test pour transmetteur DP, 5 000 psi, 5⁄16"-24 UNF

Modèle: QTHA-FRS0

Raccordez un tuyau à test rapide directement à cet émetteur DP ou à cette vanne de jauge à l'aide de l'orifice de purge lorsqu'il n'est pas monté sur un collecteur à 3 soupapes ou une vanne de jauge ou lorsque le collecteur n'est pas facilement accessible. De plus, ce transmetteur présente une pression maximale de 5 000 psi et des raccords 5⁄16"-24 UNF x mâle Quick-test.

En savoir plus

Ralston QTHA-FRS0 offre

Caractéristiques

  • Allows you to connect a Quick Test Hose directly to a differential pressure transmitter without removing the vent plug
  • The tip of this adapter is precision ground to make a pressure tight metal-to-metal seal with the bleeder port in the DP vent plug
  • Connects through the bleeder screw port on a DP transmitter

Advantages

  • Quality stays overtime - Adapter is made of hardened stainless steel so the tip won't be damaged easily by repeated tightening
  • Work smarter - Make a fast with Quick-test thanks to the integrated O-ring pressure seals with no tools or thread taping required
  • No leaks here - This adapter won't weep
  • No stress needed if you forget to vent off the pressure with a valve - The Quick-test connection will safely self-vent instead of blowing off

Applications

  • DP transmitters
  • Gauge valve

Spécifications pour le Ralston QTHA-FRS0

Materials Stainless steel
Operating Temperature Maximum: 140°F (60°C)
Minimum: 0°F (-18°C)
Maximum Pressure 5000 psi/350 bar/35 MPa
Maximum Vacuum 0.00 InHg/0.0 kPa
Media Compatibility Air, inert gas, natural gas, petroleum based oil, water
Seal Materials Buna-N
Wrench Size 9⁄16" (15 mm)
Connector End 1: 5⁄16"-24 male DP transmitter/gauge valve
End 2: Male Quick-test
Dimensions 2.16 x 0.56" (5.49 x 1.42 cm)

Le Ralston QTHA-FRS0 comprend

  • Ralston QTHA-FRS0 DP Transmitter Quick-Test Adapter, 5⁄16-24 male DP transmitter, 5000 psi
datasheet pour le Ralston QTHA-FRS0 DP Transmitter Quick-Test Adapter, 5⁄16-24 male DP transmitter, 5000 psi

Poser une question sur le Ralston QTHA-FRS0 DP Transmitter Quick-Test Adapter, 5⁄16-24 male DP transmitter, 5000 psi

Ralston QTHA-FRS0 offre

Caractéristiques

  • Allows you to connect a Quick Test Hose directly to a differential pressure transmitter without removing the vent plug
  • The tip of this adapter is precision ground to make a pressure tight metal-to-metal seal with the bleeder port in the DP vent plug
  • Connects through the bleeder screw port on a DP transmitter

Advantages

  • Quality stays overtime - Adapter is made of hardened stainless steel so the tip won't be damaged easily by repeated tightening
  • Work smarter - Make a fast with Quick-test thanks to the integrated O-ring pressure seals with no tools or thread taping required
  • No leaks here - This adapter won't weep
  • No stress needed if you forget to vent off the pressure with a valve - The Quick-test connection will safely self-vent instead of blowing off

Applications

  • DP transmitters
  • Gauge valve
En savoir plus...

Spécifications pour le Ralston QTHA-FRS0

Materials Stainless steel
Operating Temperature Maximum: 140°F (60°C)
Minimum: 0°F (-18°C)
Maximum Pressure 5000 psi/350 bar/35 MPa
Maximum Vacuum 0.00 InHg/0.0 kPa
Media Compatibility Air, inert gas, natural gas, petroleum based oil, water
Seal Materials Buna-N
Wrench Size 9⁄16" (15 mm)
Connector End 1: 5⁄16"-24 male DP transmitter/gauge valve
End 2: Male Quick-test
Dimensions 2.16 x 0.56" (5.49 x 1.42 cm)

Le Ralston QTHA-FRS0 comprend

  • Ralston QTHA-FRS0 DP Transmitter Quick-Test Adapter, 5⁄16-24 male DP transmitter, 5000 psi
datasheet pour le Ralston QTHA-FRS0 DP Transmitter Quick-Test Adapter, 5⁄16-24 male DP transmitter, 5000 psi

Poser une question sur le Ralston QTHA-FRS0 DP Transmitter Quick-Test Adapter, 5⁄16-24 male DP transmitter, 5000 psi

Plus de produits Ralston



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.