Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

4019 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

4019 COMMENTAIRES

PTC Instruments 409D Ergo Durometer Shore D, 0 to 100 points

Modèle: 409D

PTC Instruments 409D Ergo Durometer Shore D, 0 to 100 points-

Télécharger: datasheet

Plus de produits PTC Instruments

Demander à un expert

PTC Instruments 409D Ergo Durometer Shore D, 0 to 100 points

Modèle: 409D

The ergo durometer shore D comes standard with a Max Hold hand which maintains the peak reading until reset. Features a low glare serialized dial with bold, easy to read numbers. The case tapers to a base that is 1 x 1" to allow better access to confined areas.

The ergo durometer shore D comes standard with a Max Hold hand which maintains the peak reading until reset. Features a low glare serialized dial with bold, easy to read numbers. The case tapers to a base that is 1 x 1" to allow better access to confined areas.

Prix spécial $1405.05 CAD
Prix régulier $1653.00 CAD
Disponibilité 2 à 3 semaines
Quantité

Accessoires recommandées

PTC Instruments 402D Aluminum Test Block ASTM Type D, 0.44 x 2.25 x 0.75"-

PTC Instruments 402D Aluminum Test Block ASTM Type D, 0.44 x 2.25 x 0.75"

402D

PTC Instruments 475 Durometer Stand for C/D/DO durometers, 11 lbs-

PTC Instruments 475 Durometer Stand for C/D/DO durometers, 11 lbs

475

PTC Instruments 473 Deadweight Durometer Stand, 2.2 lbs and 11 lbs-

PTC Instruments 473 Deadweight Durometer Stand, 2.2 lbs and 11 lbs

473

PTC Instruments 7000D Hydraulic Durometer Stand for C/D/DO durometers-

PTC Instruments 7000D Hydraulic Durometer Stand for C/D/DO durometers

7000D

PTC Instruments 320 Durometer Stand Spring Load Cell-

PTC Instruments 320 Durometer Stand Spring Load Cell

320

PTC Instruments 409D Offers

The ergo durometer shore D comes standard with a Max Hold hand which maintains the peak reading until reset. Features a low-glare serialized dial with bold, easy-to-read numbers. The case tapers to a base that is 1 x 1" (2.5 x 2.5 cm) to allow better access to confined areas. Removable top knob (8 to 32 threads) permits both easy handheld use or attachment to stands.

Features

  • Base tapers to 1 x 1" (2.5 x 2.5 cm)
  • Max Hold pointer is standard
  • Easy-to-read 0 to 100 point dial
  • Accessory test stands available
  • NIST/A2LA to ISO 17025 certification available

Applications

  • Pipeline Coating Epoxies
  • Plexiglass
  • Epoxy
  • Vinyl
  • Cellulose Acetate
  • Kevlar

PTC Instruments 409D Specifications

Range Type D: 0 to 100 points
Accuracy ±1 point
Height 4" (10.2 cm)
Width 2.25" (5.7 cm)
Depth 1.75" (4.4 cm)
Weight 6 oz (170 g)
Shipping Weight 3 lbs (1.4 kg)
Cliquer ici pour toutes les spécifications du PTC Instruments 409D

What's included with the PTC Instruments 409D

  • Analog Ergo Style Durometer (ASTM Type D)
  • Precision Aluminum Test Block
  • Carrying Case
datasheet pour le PTC Instruments 409D Ergo Durometer Shore D, 0 to 100 points

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le PTC Instruments 409D Ergo Durometer Shore D, 0 to 100 points.

PTC Instruments 402D Aluminum Test Block ASTM Type D, 0.44 x 2.25 x 0.75" 402D
The aluminum test block is used as a field check of type D durometers. It indicates if the durometer is mechanically sound before use. It is a combination of depth gauge and spring force gauge designed to provide consistent results in a wider temperature range than rubber or plastic blocks.



PTC Instruments 475 Durometer Stand for C/D/DO durometers, 11 lbs 475
The durometer stand is capable of applying the specimen to indenter in a manner that minimizes shock. Test materials up to 5" thick. Custom stands are available for larger samples.



PTC Instruments 473 Deadweight Durometer Stand, 2.2 lbs and 11 lbs 473
The durometer deadweight test stand is designed to provide the ASTM recommended forces. Compatible with classic or ergo style durometers and of other manufacturers provided it can be mounted on an 8 to 32" thread. It comes with both 1-kg (for ASTM type A, B, E, and O) and 5-kg (ASTM C, D, and DO) weight.



PTC Instruments 7000D Hydraulic Durometer Stand for C/D/DO durometers 7000D
Each heavy-duty hydraulic durometer test stand features a solid base for stability and a one-inch diameter stainless steel precision ground support shaft for accurate alignment. It accommodates both standard and pencil length durometers. Made with high precision machined components.



PTC Instruments 320 Durometer Stand Spring Load Cell 320
The precision-engineered durometer stand spring load cell provide the ASTM recommended forces for Types A, B, E, O, C, D, and DO. Its innovative design allows the user to lock the table perpendicular to the durometer or to be used in the self-aligning mode to accommodate non-parallel material test specimens.



Poser une question sur le PTC Instruments 409D Ergo Durometer Shore D, 0 to 100 points

PTC Instruments 409D Offers

The ergo durometer shore D comes standard with a Max Hold hand which maintains the peak reading until reset. Features a low-glare serialized dial with bold, easy-to-read numbers. The case tapers to a base that is 1 x 1" (2.5 x 2.5 cm) to allow better access to confined areas. Removable top knob (8 to 32 threads) permits both easy handheld use or attachment to stands.

Features

  • Base tapers to 1 x 1" (2.5 x 2.5 cm)
  • Max Hold pointer is standard
  • Easy-to-read 0 to 100 point dial
  • Accessory test stands available
  • NIST/A2LA to ISO 17025 certification available

Applications

  • Pipeline Coating Epoxies
  • Plexiglass
  • Epoxy
  • Vinyl
  • Cellulose Acetate
  • Kevlar
En savoir plus...

PTC Instruments 409D Specifications

Range Type D: 0 to 100 points
Accuracy ±1 point
Height 4" (10.2 cm)
Width 2.25" (5.7 cm)
Depth 1.75" (4.4 cm)
Weight 6 oz (170 g)
Shipping Weight 3 lbs (1.4 kg)
Cliquer ici pour toutes les spécifications du PTC Instruments 409D

What's included with the PTC Instruments 409D

  • Analog Ergo Style Durometer (ASTM Type D)
  • Precision Aluminum Test Block
  • Carrying Case
datasheet pour le PTC Instruments 409D Ergo Durometer Shore D, 0 to 100 points

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le PTC Instruments 409D Ergo Durometer Shore D, 0 to 100 points.

PTC Instruments 402D Aluminum Test Block ASTM Type D, 0.44 x 2.25 x 0.75" 402D
The aluminum test block is used as a field check of type D durometers. It indicates if the durometer is mechanically sound before use. It is a combination of depth gauge and spring force gauge designed to provide consistent results in a wider temperature range than rubber or plastic blocks.



PTC Instruments 475 Durometer Stand for C/D/DO durometers, 11 lbs 475
The durometer stand is capable of applying the specimen to indenter in a manner that minimizes shock. Test materials up to 5" thick. Custom stands are available for larger samples.



PTC Instruments 473 Deadweight Durometer Stand, 2.2 lbs and 11 lbs 473
The durometer deadweight test stand is designed to provide the ASTM recommended forces. Compatible with classic or ergo style durometers and of other manufacturers provided it can be mounted on an 8 to 32" thread. It comes with both 1-kg (for ASTM type A, B, E, and O) and 5-kg (ASTM C, D, and DO) weight.



PTC Instruments 7000D Hydraulic Durometer Stand for C/D/DO durometers 7000D
Each heavy-duty hydraulic durometer test stand features a solid base for stability and a one-inch diameter stainless steel precision ground support shaft for accurate alignment. It accommodates both standard and pencil length durometers. Made with high precision machined components.



PTC Instruments 320 Durometer Stand Spring Load Cell 320
The precision-engineered durometer stand spring load cell provide the ASTM recommended forces for Types A, B, E, O, C, D, and DO. Its innovative design allows the user to lock the table perpendicular to the durometer or to be used in the self-aligning mode to accommodate non-parallel material test specimens.



Poser une question sur le PTC Instruments 409D Ergo Durometer Shore D, 0 to 100 points

Plus de produits PTC Instruments



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.