Covering a range of 20 to 100 ft-lbs in 2 ft-lb increments, this dial torque wrench maintains 2% accuracy from 20% of full scale to maximum capacity in both clockwise and counterclockwise directions. The patented torsion bar design connects the 1/2" (12.7 mm) square drive directly to the dial, providing a reading of the actual drive twist regardless of hand-hold position. Measuring 15-21/32" (397.7 mm) in length, the tool utilizes a tapered nose to facilitate access in restricted work areas.
Covering a range of 20 to 100 ft-lbs in 2 ft-lb increments, this dial torque wrench maintains 2% accuracy from 20% of full scale to maximum capacity in both clockwise and counterclockwise directions. The patented torsion bar design connects the 1/2" (12.7 mm) square drive directly to the dial, providing a reading of the actual drive twist regardless of hand-hold position. Measuring 15-21/32" (397.7 mm) in length, the tool utilizes a tapered nose to facilitate access in restricted work areas.
All D series meets or exceeds all applicable requirements of: ANSI / ASME B107.14' (107.14 m), GGG-W-00686C, BS6073: 1988 ISO6789 Enables the user to read the actual twist of the square drive And, since a lever principle isn't used, hand-hold position is not critical, unlike the split or bending beam competitive torque wrenches
Caractéristiques
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Overall Length | 15-21/32" (398 mm) |
| Drive Type | 1/2" (12.7 mm) Square |
| Torque Range | 20 to 100 ft-lbs |
| Increments | 2 ft-lbs |
| Secondary Capacity | 2.8 to 14 kg.m |
| Secondary Scale Increments | 0.5 kg.m |
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Overall Length | 15-21/32" (398 mm) |
| Drive Type | 1/2" (12.7 mm) Square |
| Torque Range | 20 to 100 ft-lbs |
| Increments | 2 ft-lbs |
| Secondary Capacity | 2.8 to 14 kg.m |
| Secondary Scale Increments | 0.5 kg.m |
