Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

4490 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

4490 COMMENTAIRES

Parker DA-400S AC/DC Contour Probe, 230 VAC, 3 A

Modèle: DA-400S

Parker DA-400S AC/DC Contour Probe, 230 VAC, 3 A-

Télécharger: datasheet manual

Plus de produits Parker

Demander à un expert

Parker DA-400S AC/DC Contour Probe, 230 VAC, 3 A

Modèle: DA-400S

Featuring a portable, self-contained instrument designed to produce a magnetic field on or within ferrous-magnetic materials, along with selective AC and DC functions. The controls and solid-state electronics are contained within the high impact molded housing, and the articulating legs allow the AC or DC field to be applied to the precise area of inspection.

Featuring a portable, self-contained instrument designed to produce a magnetic field on or within ferrous-magnetic materials, along with selective AC and DC functions. The controls and solid-state electronics are contained within the high impact molded housing, and the articulating legs allow the AC or DC field to be applied to the precise area of inspection.

Discontinué!

Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :

Parker Research DA-400 Joug magnétoscopique compact CA/CC Contour Probe, 115 V CA-

Parker Research DA-400 Joug magnétoscopique compact CA/CC Contour Probe, 115 V CA

Modèle: DA400 | No. de commande: DA-400

Instrument portable et autonome conçu pour produire un champ magnétique sur ou à l'intérieur de matériaux ferromagnétiques afin de localiser les défauts de surface et certains défauts de sous-surface. Applique des champs magnétiques continus ou résiduels et permet également la démagnétisation.

En savoir plus

Parker DA-400S offre

Caractéristiques

  • Versatility and powerful performance in a lightweight instrument
  • Constant AC or half-wave rectified (DC) fields with the flip of a switch; for the location of surface and some sub-surface defects
  • Apply continuous magnetic fields and demagnetize too
  • Use with dry powder, wet fluorescent or visible
  • High impact-molded housing
  • Exceeds ASTM lifting standards
  • Portable, self-contained instrument designed to produce a magnetic field on or within ferrous-magnetic materials
  • Selective AC and DC functions are built into a single reliable instrument
  • AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection
  • DC mode produces an intense Half Wave Rectified DC field for detection of some sub-surface defects
  • With the flexibility of articulating legs and a rugged molded housing, it can be used on nearly any part or surface contour: in the lab, factory, or field site

Applications

  • Field testing
  • Spot inspections
  • In-service inspections
  • Demanding environments
  • Welding inspections

Spécifications pour le Parker DA-400S

Line Voltage Single Phase 115 VAC, 50/60 Hz
Line Current 6 A AC/DC
Field AC/DC
Duty Cycle 2 minutes on – 2 minutes off
Construction Glass-filled nylon housing
3 m (10 ft) 3-wire power cord
Span 12" (305 mm) across poles
Dimensions 10 x 8 x 2.25"
Weight 8.5 lbs (3.8 kg)

Le Parker DA-400S comprend

  • Parker DA-400S AC/DC Contour Probe, 230 VAC, 3 A
datasheet pour le Parker DA-400S AC/DC Contour Probe, 230 VAC, 3 A manual pour le Parker DA-400S AC/DC Contour Probe, 230 VAC, 3 A

Poser une question sur le Parker DA-400S AC/DC Contour Probe, 230 VAC, 3 A

Parker DA-400S offre

Caractéristiques

  • Versatility and powerful performance in a lightweight instrument
  • Constant AC or half-wave rectified (DC) fields with the flip of a switch; for the location of surface and some sub-surface defects
  • Apply continuous magnetic fields and demagnetize too
  • Use with dry powder, wet fluorescent or visible
  • High impact-molded housing
  • Exceeds ASTM lifting standards
  • Portable, self-contained instrument designed to produce a magnetic field on or within ferrous-magnetic materials
  • Selective AC and DC functions are built into a single reliable instrument
  • AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection
  • DC mode produces an intense Half Wave Rectified DC field for detection of some sub-surface defects
  • With the flexibility of articulating legs and a rugged molded housing, it can be used on nearly any part or surface contour: in the lab, factory, or field site

Applications

  • Field testing
  • Spot inspections
  • In-service inspections
  • Demanding environments
  • Welding inspections
En savoir plus...

Spécifications pour le Parker DA-400S

Line Voltage Single Phase 115 VAC, 50/60 Hz
Line Current 6 A AC/DC
Field AC/DC
Duty Cycle 2 minutes on – 2 minutes off
Construction Glass-filled nylon housing
3 m (10 ft) 3-wire power cord
Span 12" (305 mm) across poles
Dimensions 10 x 8 x 2.25"
Weight 8.5 lbs (3.8 kg)

Le Parker DA-400S comprend

  • Parker DA-400S AC/DC Contour Probe, 230 VAC, 3 A
datasheet pour le Parker DA-400S AC/DC Contour Probe, 230 VAC, 3 A manual pour le Parker DA-400S AC/DC Contour Probe, 230 VAC, 3 A

Poser une question sur le Parker DA-400S AC/DC Contour Probe, 230 VAC, 3 A

Plus de produits Parker



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.