Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

4490 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

4490 COMMENTAIRES

OTC 6575-1 Hub Grappler Puller, 3/4" drive screw

Modèle: 6575-1 | No. de commande: OTC-6575-1

OTC 6575-1 Hub Grappler Puller, 3/4" drive screw-

Plus de produits OTC

Demander à un expert

OTC 6575-1 Hub Grappler Puller, 3/4" drive screw

Modèle: 6575-1 | No. de commande: OTC-6575-1

With a 3/4" (19 mm) custom drive screw and a special equalizer washer, this hub puller uses force from an impact gun to minimize service time. The jaws are sized for hub applications and locate on the puller bar without the use of fasteners for quick setup. Proprietary heat treating extends the service life of the components 5 to 10 times longer than similar designs.

With a 3/4" (19 mm) custom drive screw and a special equalizer washer, this hub puller uses force from an impact gun to minimize service time. The jaws are sized for hub applications and locate on the puller bar without the use of fasteners for quick setup. Proprietary heat treating extends the service life of the components 5 to 10 times longer than similar designs.

Votre prix $379.00 CAD
Disponibilité 2 à 3 semaines
Quantité

OTC 6575-1 offre

Caractéristiques

  • The new hub grappler puller is specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time
  • The new jaws are designed and sized to properly fit hub applications and can be quickly located on the puller par without the use of fasteners
  • The new 3/4" (19.05 mm) custom drive screw coupled with the special equalizer washer provides smooth operation while the proprietary heat treating extends its life 5 to 10 times longer than similar designs

Le OTC 6575-1 comprend

  • OTC 6575-1 Hub Grappler Puller, 3/4" drive screw

Poser une question sur le OTC 6575-1 Hub Grappler Puller, 3/4" drive screw

OTC 6575-1 offre

Caractéristiques

  • The new hub grappler puller is specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time
  • The new jaws are designed and sized to properly fit hub applications and can be quickly located on the puller par without the use of fasteners
  • The new 3/4" (19.05 mm) custom drive screw coupled with the special equalizer washer provides smooth operation while the proprietary heat treating extends its life 5 to 10 times longer than similar designs
En savoir plus...

Le OTC 6575-1 comprend

  • OTC 6575-1 Hub Grappler Puller, 3/4" drive screw

Poser une question sur le OTC 6575-1 Hub Grappler Puller, 3/4" drive screw

Plus de produits OTC



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.