Monitoring Solutions for Water, Indoor, Outdoor, & Agriculture
Measures up to 200A of DC current in both flow directions which is especially beneficial for Solar PV applications.
Measures up to 200A of DC current in both flow directions which is especially beneficial for Solar PV applications.
Requires analog port selection during U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires a 4-20mA input cable (CABLE-4-20mA) and external power provided by an AC adapter (AC-SENS-1). When configuring this with an RX3000 system, it requires a analog module (RXMOD-A1).
Caractéristiques
| Measurement Range | ± 2 to ± 200 (Via Span Adjust) |
| Accuracy (Below 100A Span) | ± .5 A |
| Accuracy (Above 100A Span) | ± .5% Full Scale |
| Sensor Supply | 12 to 24 DC (15 VDC min. For Currents > 120 A), 35 mA No-Load to 110 mA at 200 A Current |
| Isolation | 600 VAC rms |
| Operating Temperature Range | -30 to 60°C (-22 to 140°F) |
| Humidity Range | 10 to 90% Non-Condensing |
| Response Time | 2 sec. |
| Output | 2 sec. |
| Dimensions | 3.1 x 2.8 x 1.4" (79 x 70 x 36 mm) |
| Weight | 5.25 oz. |
| Sensor Opening | 1.1 x .9" (28 x 23 mm) |
| LED Indications | Single Green Blink = Norm Double Green = Over Span Red + Green = Over Limit Solid Red = Overload |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Onset HOBO T-VER-971BP-200 Split-Core, bi-polar DC transducer.
| Measurement Range | ± 2 to ± 200 (Via Span Adjust) |
| Accuracy (Below 100A Span) | ± .5 A |
| Accuracy (Above 100A Span) | ± .5% Full Scale |
| Sensor Supply | 12 to 24 DC (15 VDC min. For Currents > 120 A), 35 mA No-Load to 110 mA at 200 A Current |
| Isolation | 600 VAC rms |
| Operating Temperature Range | -30 to 60°C (-22 to 140°F) |
| Humidity Range | 10 to 90% Non-Condensing |
| Response Time | 2 sec. |
| Output | 2 sec. |
| Dimensions | 3.1 x 2.8 x 1.4" (79 x 70 x 36 mm) |
| Weight | 5.25 oz. |
| Sensor Opening | 1.1 x .9" (28 x 23 mm) |
| LED Indications | Single Green Blink = Norm Double Green = Over Span Red + Green = Over Limit Solid Red = Overload |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Onset HOBO T-VER-971BP-200 Split-Core, bi-polar DC transducer.
