When you connect this gel-filled epoxy pH electrode to your compatible meter, you can start obtaining accurate measurements.
When you connect this gel-filled epoxy pH electrode to your compatible meter, you can start obtaining accurate measurements.
Test dirty field water and solutions with heavy metals or organics using this OAKTON WD-35816-72 Double-Junction Gel-Filled Epoxy pH Electrode. The electrode attaches to your compatible meter via its 8-pin connection and features an extended life thanks to the pin-type junction that provides a low electrolyte flow.
Features
| Compatibility | pH 600/610/620, PC600, PD600 and PCD650 meters |
| Junction | Pin-type double |
| Material | Gel-filled epoxy |
| Connection | 8-pin |
| Cable Length | 30" (76.2 cm) |
| Maximum Temperature | 176°F (80°C) |
| Diameter | 0.47" (12 mm) |
| Compatibility | pH 600/610/620, PC600, PD600 and PCD650 meters |
| Junction | Pin-type double |
| Material | Gel-filled epoxy |
| Connection | 8-pin |
| Cable Length | 30" (76.2 cm) |
| Maximum Temperature | 176°F (80°C) |
| Diameter | 0.47" (12 mm) |
