Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

3963 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

3963 COMMENTAIRES

MRU Ampro Plus Analyseur de combustion/émission, O2/CO

Modèle: 420082-01

MRU Ampro Plus Analyseur de combustion/émission, O<sub>2</sub>/CO-

Télécharger: datasheet

Plus de produits MRU

Demander à un expert

MRU Ampro Plus Analyseur de combustion/émission, O2/CO

Modèle: 420082-01

Adaptée à la surveillance des émissions de combustion et des processus industriels, cet ensemble d'analyse mesure l'oxygène et le monoxyde de carbone, la pression différentielle et la température, et calcule le dioxyde de carbone à partir d'autres mesures. En outre, cette trousse comprend une sonde avec une ligne d'échantillonnage, un tube de sonde et un étui de transport.

Adaptée à la surveillance des émissions de combustion et des processus industriels, cet ensemble d'analyse mesure l'oxygène et le monoxyde de carbone, la pression différentielle et la température, et calcule le dioxyde de carbone à partir d'autres mesures. En outre, cette trousse comprend une sonde avec une ligne d'échantillonnage, un tube de sonde et un étui de transport.

Votre prix $5255.00 CAD
Disponibilité 1 à 2 semaines
Quantité

Accessoires recommandées

MRU 65481 Heat Deflector Shield, 6"-

MRU 65481 Heat Deflector Shield, 6"

65481

MRU 62928 Combustion Air Temperature Probe, 8"-

MRU 62928 Combustion Air Temperature Probe, 8"

62928

MRU 65647 NO<sub>2</sub> Low Software Option, 0 to 100 ppm-

MRU 65647 NO2 Low Software Option, 0 to 100 ppm

65647

MRU 63060 SO<sub>2</sub> Sensor for the Ampro Plus, 0 to 2000/5000 ppm-

MRU 63060 SO2 Sensor for the Ampro Plus, 0 to 2000/5000 ppm

63060

MRU 12698 LED Lamp, 21 lumen, 5,000 K-

MRU 12698 LED Lamp, 21 lumen, 5,000 K

12698

MRU 63319 ABS Transport Case-

MRU 63319 ABS Transport Case

63319

MRU 420082-01 offre

Économique et convivial, cet analyseur de combustion/émission est doté d'un écran haute résolution qui fournit davantage d'informations grâce à des graphiques détaillés. En outre, cet analyseur est doté d'un collecteur de condensation et d'un arrêt d'eau éclairés, ainsi que d'une connectivité réseau WLAN.

Caractéristiques

  • Convient à la surveillance des émissions de combustion et des processus industriels
  • Capteur de CO compensé H2
  • Batterie li-ion puissante offrant jusqu'à 20 heures d'autonomie
  • Coût de possession bas
  • Utilisateur extrêmement convivial
  • Espérance de vie du capteur d'oxygène (O2) de plus de quatre ans
  • Protection active du capteur de CO
  • Rendez votre processus de combustion plus rentable
  • Obtenir les données pour montrer que votre organisation se soucie de l'environnement
  • Écran couleur très lumineux de 10.16 cm (4") avec graphiques pour de nombreuses applications
  • Grand collecteur de condensation illuminé avec filtre d'arrêt d'eau
  • Connectivité réseau WLAN
  • Une connexion BluetoothMD facile pour le transfert de données ou la télécommande de l'appareil
  • Aimants arrière pour un fonctionnement mains libres
  • Mini interface USB pour le transfert de données et le chargement de la batterie
  • Boîtier robuste renforcé de fibre
  • Boîtier compact
  • Interface IR pour imprimante externe
  • Lecteur de carte SD
  • Fonctionnement intuitif par menu guidé
  • Panneaux latéraux souples et antidérapants
  • Clavier durable et résistant à la saleté
  • Mesure de la température des ports de température de type K et de la température différentielle
  • Ports en acier inoxydable pour la mesure des gaz de combustion et de la pression
  • Calcule le CO2 en fonction d'autres mesures

Applications

  • Dépannage
  • Efficacité du brûleur
  • Brasseries
  • Industrie du ciment
  • Appareil portatif de combustion
  • Turbines à gaz et compresseurs
  • Industrie du verre
  • Installateurs et fabricants de chaudières
  • Industrie du fer et de l'acier
  • Centrales électriques
  • Raffineries et pétrochimie
  • Universités et laboratoires

Spécifications pour le MRU 420082-01

Oxygène (longue durée de vie) Gamme de mesure: 0 à 21%
Résolution: 0.1%
Précision: ±0.2 volume % abs
Monoxyde de carbone (compensé H2) Gamme de mesure: 0 à 10 000/20 000 ppm
Résolution: 1 ppm
Précision: ±10 ppm ou lecture à 5% <4 000 ppm, lecture à 10% >4 000 ppm
Température Cheminée:
Gamme de mesure: 0 à 800°C (32 à 1472°C) avec acier inoxydable
Résolution: -17.22°C (1°C)
Précision: -15.55 à <200°C (±4 à <392°F), lecture de 1% >200°C (392°C)

Gaz de combustion:
Gamme de mesure: 0 à 1 100°C (32 à 2012°C) avec inconel
Résolution: -17.22°C (1°C)
Précision: -15.55 à <200°C (±4 à <392°C), lecture de 1% >200°C (392°C)

Air primaire/ambiant:
Gamme de mesure: 0 à +100°C (32 à 212°C)
Résolution: -17.22°C (1°F)
Précision: -16.66°C (± 2°C)

Différentiels:
Gamme de mesure: Jusqu'à 0 à 1100°C (2012°C)
Résolution: -17.22°C (1°C)
Précision: -15.55 à <200°C (±4 à <392°F), lecture de 1% >200°C (392°C)
Tirage de cheminée Gamme de mesure: ±40" H2O (100 hPa)
Résolution: 1 Pa
Précision: ±0.02" H2O ou lecture de 1%
Pression différentielle Gamme de mesure: ±80" H2O (200 hPa)
Résolution: 1 Pa
Précision: ±0,02" H2O ou lecture de 1%
Mesure de la vitesse d'écoulement du gaz Gamme de mesure: 3 à 100 m/s (à l'aide d'un tube de Pitot)
Résolution: 0.1 m/s
Valeurs calculées Dioxyde de carbone: 0 à CO2 maximum
Efficacité: 0 à 120%
Excès d’air: 0 à 99.9
Pertes de chaleur qA: 0 à 99.9%
Rapport d’air (lambda): 1 à 9.99
Rapport CO/CO2: 0 à 10
Gamme d'aspiration maximale de pompe à gaz typique/écoulement de gaz typique 150 hPa/50 l/h
Mémoire interne 32 000 jeux de données
Transmission de données/interfaces USB, Bluetooth, WLAN/USB, Bluetooth, WLAN, IRDA, carte SD
Affichage Écran couleur de 10.16 cm (4")
Conditions ambiantes Humidité à 95% sans condensation
Catégorie de protection IP30
Alimentation Bloc-piles interne Li-Ion, 20 heures de fonctionnement
Blocs d'alimentation réseau: 100 à 240 V, 5 V c.c., 1 200 mA
Sonde Sonde industrielle avec ligne d'échantillonnage de 2,74 m (9') et tube de sonde interchangeable de 30,48 cm (12")
Dimensions 244 x 113 x 54 mm (4.3 x 8.8 x 2.04")
Poids 750 g (1.65 lbs)

Le MRU 420082-01 comprend

  • Analyseur de combustion/émission
  • 3 x capteurs
  • Câble USB
  • Carte SD
  • Filtre de rechange en PTFE
  • Séparateur de condensat avec filtre d'arrêt d'eau
  • Chargeur de pile
  • Sonde avec ligne d'échantillonnage
  • Tube de sonde
  • Étui de transport
datasheet pour le MRU Ampro Plus Analyseur de combustion/émission, O2/CO

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le MRU Ampro Plus Analyseur de combustion/émission, O2/CO.

MRU 11153 Filter Kit for solid fuel measurements 11153
Ideal for sold fuel measurements like wood, pellets, and coal, this filter kit protects units against humidity and acid gases. Additionally, this kit is not suitable for NOx and SO2 measurements.



MRU 52798 Filter Tablets, 50-pack 52798
The filters prevent access for contaminants. They improve accuracy of results by removing interference.



MRU 13346 Water Stop Filter with o-ring, 1 µm, ptfe 13346
For use with the 10156, this water stop filter features an o-ring and is made from PTFE. In addition, this filter has a size of 1 μm.



MRU 56748 Sintered Metal Filter for the 60813/60814/60815, 932°F, 3 μm 56748
Ideal for use with 60813/60814/60815 probe tubes, this sintered metal filter is an accessory or replacement part and is for temperatures up to 932°F (500°C).



MRU 10156 Replaceable Filter Element for the optimax 10156
Compatible with the Optimax series biogas analyzer, this replaceable filter element is for the condensate separator and is washable and reusable up to five times.



MRU 63136 AUX Input, AMPRO/OPTIMA, 7 optional 63136
Compatible with the AMPRO Plus and OPTIMA 7, this AUX input allows for the use of the Detector probe and its wide choice of plug-n-play sensors.



MRU 65481-10 Heat Deflector Shield 65481-10
The shield prevents heat from damaging equipment. It allows probes to safely measure in extreme temperatures.



MRU 65481 Heat Deflector Shield, 6" 65481
The shield reduces exposure to extreme heat. It is designed to allow a probe tube to pass through the shield.



MRU 64277 Transport Bag with industrial probe, arctic, -22°F 64277
The transport bag functions in temperatures as low as -22°F (-30°C). It comes with an industrial probe.



MRU 63730 Transport Bag, arctic, 5deg;F 63730
The bag is designed for low temperature environments. It features an unheated design to protect equipment.



MRU 11507 Soft Transport Bag with shoulder strap 11507
The bag helps to safely transport equipment. It keeps the instruments secure during travel.



MRU 63731 Insulating Sleeve for the arctic transport case 63731
The sleeve prevents extreme changes in temperature. It is designed for the low temperature travel case.



MRU 62931 ABS Transport case with large compartment 62931
The case protects equipment during travel. It features a large compartment for better storage.



MRU 63319 ABS Transport Case 63319
The case improves transportation and storage. The durable construction prevents damage.



MRU 63729 Transport Bag, small 63729
The bag improves the mobility for equipment. It is designed for smaller instruments.



MRU 64618 Infrared Module, CO2, 0 to 40% 64618
The infrared module is ideal for CO2 gas measurement. It has a measurement range of 0 to 40%.



MRU 65648 Infrared Module, CO2, CxHy 65648
The module uses infrared to measure gas concentrations. It is designed as an accessory for analyzers.



MRU 59292 Exchangeable Probe Tube, 20 x 0.3" 59292
The tube improves access to small locations of the system. It increases the range a probe can reach for measurements.



MRU 55674 Exchangeable Probe Tube, 1,200°F 55674
The tube provides transport for samples to an analyzer. It is designed to prevent leaks.



MRU 62747 Industrial Fluegas Probe Handle with 16' hose 62747
Compatible with the AMPRO Plus and OPTIMA 7, this industrial flue-gas probe handle features a 16' (5 m) hose.



MRU 63927 Inclonel Exchangeable Fluegas Probe, 20 x 0.4" 63927
Compatible with the AMPRO Plus and OPTIMA 7, this inclonel exchangeable flue-gas probe features a dimension of 20 x 0.4" (50.8 x 1.01 cm).



MRU 63320 High Temperature Probe with ceramic probe tube, ≤3000°F, 40 x 0.4" 63320
Compatible with the Ampro Plus series handheld analyzers, this high-temperature probe features a ceramic probe tube. In addition, this probe is 40 x 0.4" (1000 x 10 mm) long and is for temperatures up to 3000°F (1700°C).



MRU 60813 Exchangeable Probe Tube with sintered metal filter and cone, ≤932°F, 30 x 0.4" 60813
Ideal for use with an industrial probe handle, this exchangeable probe tube is made from high-grade steel and includes a sintered metal filter and a cone. In addition, this probe tube is 30 x 0.4" (762 x 10 mm) long and is for temperatures up to 932°F (500°C).



MRU 56738 Exchangeable Probe Tube with cone, ≤2000°F, 60 x 0.4" 56738
Ideal for use with an industrial probe handle, this exchangeable probe tube is made from inconel and includes a cone. In addition, this probe tube is 80 x 0.4" (2000 x 10 mm) long and is for temperatures up to 2000°F (1100°C).



MRU 61518 Combustion Air Temperature Probe, 12" 61518
Compatible with the Ampro Plus series handheld analyzers, this combustion air temperature probe is 12" (300 mm) long and is an accessory or replacement part.



MRU 62928 Combustion Air Temperature Probe, 8" 62928
Compatible with the Ampro Plus series handheld analyzers, this combustion air temperature probe is 8" (200 mm) long and is an accessory or replacement part.



MRU 62741 Industrial Probe Handle 62741
The handle provides a secure grip for measuring probes. It is designed to connect to several lines and probes.



MRU 11182 Detector Probe with handle and cable 11182
The probe extends the reach of analyzer instruments. The long handle keeps the user further from potential danger.



MRU 56737 Exchangeable Probe Tube, 40 x 0.4" 56737
The tube transfers samples through a system to an analyzer. It features enhanced length for more opportunities.



MRU 60815 Exchangeable Probe Tube, 60 x 0.4" 60815
The tube connects the probe to the analyzer. It features a durable construction.



MRU 60814 Exchangeable Probe Tube, high grade steel, 40 x 0.4" 60814
The tube provides more measurement opportunities for probes. It is designed to endure high temperatures.



MRU 55672 Exchangeable Probe Tube, high grade steel, 30 x 0.4" 55672
The tube provides easy access for analyzers to sample materials. It is made to withstand rigorous environments.



MRU 60626 Exchangeable Inconel Probe Tube, 30 x 0.4" 60626
The tube provides enhanced mobility for probes. The durable design prevents malfunctions.



MRU 55464 Exchangeable Probe Tube, 80 x 0.4" 55464
The probe tube moves samples to the analyzer safely. It is made to be durable and endure operation.



MRU 55583 Exchangeable Probe Tube, 12 x 0.3" 55583
The tube helps transport samples to the analyzer. It is made to withstand damage in the workplace.



MRU 62934 Combustion Air Temperature Probe 62934
The probe gathers data for analysis. It is calibrated to monitor temperatures.



MRU 63316 Differential Pressure Sensor 63316
The sensor monitors pressure within a system. It is designed to offer continuous measurements.



MRU 64110 Sensor Option, NO2 64110
The sensor is an accessory or a replacement part. It senses NO2 with a high degree of accuracy.



MRU 63060 SO2 Sensor for the Ampro Plus, 0 to 2000/5000 ppm 63060
Compatible with the Ampro Plus series handheld analyzers, this SO2 sensor is an accessory or replacement part. In addition, this sensor measures sulfur dioxide in a range from 0 to 2000/5000 ppm.



MRU 63139 Gas Flow Velocity Sensor using pitot tubes 63139
The sensor determines how quickly gas is moving through a system. It features pitot tubes for improved accuracy.



MRU 63134 AMPRO CO Sensor 63134
The sensor determines the amount of CO in the system. It features a reduced range to improve the resolution.



MRU 12121 400GD IR Temperature Sensor 12121
The sensor calculates temperature in a system. It uses infrared to gather accurate data.



MRU 11191 400GD Sensor, stack moisture test 11191
The sensor determines anomalies with moisture in a system. It can be quickly installed between operations.



MRU 11733 400GD C3H8 and H2 Sensor 11733
The gas sensor locates leaks and anomalies. It is easily installed to fit the operation.



MRU 11190 400GD Sensor, refrigerant 11190
The sensor determines refrigerant leaks. It is easily installed in the compatible gas detector.



MRU 11922 Climate Sensor 11922
The sensor provides data on the climate of a system. It covers a wide range of data without losing accuracy.



MRU 11591 Attachable Gas Leak Probe Head 11591
The probe head provides valuable durability and accuracy. It easily attaches to improve the reliability of the probe.



MRU 12130 CO Sensor for the 400GD 12130
The sensor tracks CO concentration in the system. It operates as an additional accessory for a gas detector.



MRU 12623 400GD Sensor, CO2 12623
The sensor generates data based on the composition of the atmosphere. It is calibrated to focus on CO2 for greater accuracy.



MRU 63058 AMPRO NO Sensor 63058
The sensor upgrades the efficiency of gas analyzers. It is calibrated to measure NO in a system.



MRU 11138 CH4 Sensor for the 400GD 11138
The sensor detects leaks in gas lines. The durable design is not intended for explosive regions.



MRU 63133 AMPRO CO Sensor Software Option 63133
The software alters the range and accuracy of the sensor. It is designed for carbon monoxide sensors.



MRU 11183 SO2 Low Software Option, 0 to 300 ppm 11183
Compatible with the Ampro Plus series handheld analyzers, this SO2 low software option is an accessory. In addition, this option requires an SO2 sensor and measures nitric dioxide with a range of 0 to 300 ppm.



MRU 65647 NO2 Low Software Option, 0 to 100 ppm 65647
Compatible with the Ampro Plus series handheld analyzers, this NO2 low software option is an accessory. In addition, this option requires a NO2 sensor and measures nitric dioxide in a range from 0 to 100 ppm.



MRU 64158 Automatic Measurement with data storage 64158
The measurement device allows for user determination of average value. Data is storable on SD cards.



MRU 10539 Full Version Software, MRU4win 10539
The software improves data collection and analysis. It generates real time data to enhance accuracy.



MRU 63135 AMPRO NO Sensor Software Option 63135
The software adjusts the settings of the sensors. It refines the process for greater accuracy.



MRU 13885 Service and Cleaning Kit with water stop filter 13885
Compatible with the Ampro Plus series handheld analyzers, this service and cleaning kit includes a water stop filter.



MRU 63140USW Spare Part Set for the optimax with water stop filter 63140USW
Compatible with the Optimax series biogas analyzer, this spare part set includes o-rings, a filter, a condensate show glass, and a water stop filter.



MRU 63218 Shoulder Strap for the optimax 63218
Compatible with the Optimax series biogas analyzer, this shoulder strap is an accessory or replacement part.



MRU 12698 LED Lamp, 21 lumen, 5,000 K 12698
The lamp provides illumination for gas detectors. It generates a steady light for each process.



MRU 63677 IR Printer 63677
The printer improves recording capacity during operation. It is designed to work with manometers and gas analyzers.



Poser une question sur le MRU Ampro Plus Analyseur de combustion/émission, O2/CO

MRU 420082-01 offre

Économique et convivial, cet analyseur de combustion/émission est doté d'un écran haute résolution qui fournit davantage d'informations grâce à des graphiques détaillés. En outre, cet analyseur est doté d'un collecteur de condensation et d'un arrêt d'eau éclairés, ainsi que d'une connectivité réseau WLAN.

Caractéristiques

  • Convient à la surveillance des émissions de combustion et des processus industriels
  • Capteur de CO compensé H2
  • Batterie li-ion puissante offrant jusqu'à 20 heures d'autonomie
  • Coût de possession bas
  • Utilisateur extrêmement convivial
  • Espérance de vie du capteur d'oxygène (O2) de plus de quatre ans
  • Protection active du capteur de CO
  • Rendez votre processus de combustion plus rentable
  • Obtenir les données pour montrer que votre organisation se soucie de l'environnement
  • Écran couleur très lumineux de 10.16 cm (4") avec graphiques pour de nombreuses applications
  • Grand collecteur de condensation illuminé avec filtre d'arrêt d'eau
  • Connectivité réseau WLAN
  • Une connexion BluetoothMD facile pour le transfert de données ou la télécommande de l'appareil
  • Aimants arrière pour un fonctionnement mains libres
  • Mini interface USB pour le transfert de données et le chargement de la batterie
  • Boîtier robuste renforcé de fibre
  • Boîtier compact
  • Interface IR pour imprimante externe
  • Lecteur de carte SD
  • Fonctionnement intuitif par menu guidé
  • Panneaux latéraux souples et antidérapants
  • Clavier durable et résistant à la saleté
  • Mesure de la température des ports de température de type K et de la température différentielle
  • Ports en acier inoxydable pour la mesure des gaz de combustion et de la pression
  • Calcule le CO2 en fonction d'autres mesures

Applications

  • Dépannage
  • Efficacité du brûleur
  • Brasseries
  • Industrie du ciment
  • Appareil portatif de combustion
  • Turbines à gaz et compresseurs
  • Industrie du verre
  • Installateurs et fabricants de chaudières
  • Industrie du fer et de l'acier
  • Centrales électriques
  • Raffineries et pétrochimie
  • Universités et laboratoires
En savoir plus...

Spécifications pour le MRU 420082-01

Oxygène (longue durée de vie) Gamme de mesure: 0 à 21%
Résolution: 0.1%
Précision: ±0.2 volume % abs
Monoxyde de carbone (compensé H2) Gamme de mesure: 0 à 10 000/20 000 ppm
Résolution: 1 ppm
Précision: ±10 ppm ou lecture à 5% <4 000 ppm, lecture à 10% >4 000 ppm
Température Cheminée:
Gamme de mesure: 0 à 800°C (32 à 1472°C) avec acier inoxydable
Résolution: -17.22°C (1°C)
Précision: -15.55 à <200°C (±4 à <392°F), lecture de 1% >200°C (392°C)

Gaz de combustion:
Gamme de mesure: 0 à 1 100°C (32 à 2012°C) avec inconel
Résolution: -17.22°C (1°C)
Précision: -15.55 à <200°C (±4 à <392°C), lecture de 1% >200°C (392°C)

Air primaire/ambiant:
Gamme de mesure: 0 à +100°C (32 à 212°C)
Résolution: -17.22°C (1°F)
Précision: -16.66°C (± 2°C)

Différentiels:
Gamme de mesure: Jusqu'à 0 à 1100°C (2012°C)
Résolution: -17.22°C (1°C)
Précision: -15.55 à <200°C (±4 à <392°F), lecture de 1% >200°C (392°C)
Tirage de cheminée Gamme de mesure: ±40" H2O (100 hPa)
Résolution: 1 Pa
Précision: ±0.02" H2O ou lecture de 1%
Pression différentielle Gamme de mesure: ±80" H2O (200 hPa)
Résolution: 1 Pa
Précision: ±0,02" H2O ou lecture de 1%
Mesure de la vitesse d'écoulement du gaz Gamme de mesure: 3 à 100 m/s (à l'aide d'un tube de Pitot)
Résolution: 0.1 m/s
Valeurs calculées Dioxyde de carbone: 0 à CO2 maximum
Efficacité: 0 à 120%
Excès d’air: 0 à 99.9
Pertes de chaleur qA: 0 à 99.9%
Rapport d’air (lambda): 1 à 9.99
Rapport CO/CO2: 0 à 10
Gamme d'aspiration maximale de pompe à gaz typique/écoulement de gaz typique 150 hPa/50 l/h
Mémoire interne 32 000 jeux de données
Transmission de données/interfaces USB, Bluetooth, WLAN/USB, Bluetooth, WLAN, IRDA, carte SD
Affichage Écran couleur de 10.16 cm (4")
Conditions ambiantes Humidité à 95% sans condensation
Catégorie de protection IP30
Alimentation Bloc-piles interne Li-Ion, 20 heures de fonctionnement
Blocs d'alimentation réseau: 100 à 240 V, 5 V c.c., 1 200 mA
Sonde Sonde industrielle avec ligne d'échantillonnage de 2,74 m (9') et tube de sonde interchangeable de 30,48 cm (12")
Dimensions 244 x 113 x 54 mm (4.3 x 8.8 x 2.04")
Poids 750 g (1.65 lbs)

Le MRU 420082-01 comprend

  • Analyseur de combustion/émission
  • 3 x capteurs
  • Câble USB
  • Carte SD
  • Filtre de rechange en PTFE
  • Séparateur de condensat avec filtre d'arrêt d'eau
  • Chargeur de pile
  • Sonde avec ligne d'échantillonnage
  • Tube de sonde
  • Étui de transport
datasheet pour le MRU Ampro Plus Analyseur de combustion/émission, O2/CO

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le MRU Ampro Plus Analyseur de combustion/émission, O2/CO.

MRU 11153 Filter Kit for solid fuel measurements 11153
Ideal for sold fuel measurements like wood, pellets, and coal, this filter kit protects units against humidity and acid gases. Additionally, this kit is not suitable for NOx and SO2 measurements.



MRU 52798 Filter Tablets, 50-pack 52798
The filters prevent access for contaminants. They improve accuracy of results by removing interference.



MRU 13346 Water Stop Filter with o-ring, 1 µm, ptfe 13346
For use with the 10156, this water stop filter features an o-ring and is made from PTFE. In addition, this filter has a size of 1 μm.



MRU 56748 Sintered Metal Filter for the 60813/60814/60815, 932°F, 3 μm 56748
Ideal for use with 60813/60814/60815 probe tubes, this sintered metal filter is an accessory or replacement part and is for temperatures up to 932°F (500°C).



MRU 10156 Replaceable Filter Element for the optimax 10156
Compatible with the Optimax series biogas analyzer, this replaceable filter element is for the condensate separator and is washable and reusable up to five times.



MRU 63136 AUX Input, AMPRO/OPTIMA, 7 optional 63136
Compatible with the AMPRO Plus and OPTIMA 7, this AUX input allows for the use of the Detector probe and its wide choice of plug-n-play sensors.



MRU 65481-10 Heat Deflector Shield 65481-10
The shield prevents heat from damaging equipment. It allows probes to safely measure in extreme temperatures.



MRU 65481 Heat Deflector Shield, 6" 65481
The shield reduces exposure to extreme heat. It is designed to allow a probe tube to pass through the shield.



MRU 64277 Transport Bag with industrial probe, arctic, -22°F 64277
The transport bag functions in temperatures as low as -22°F (-30°C). It comes with an industrial probe.



MRU 63730 Transport Bag, arctic, 5deg;F 63730
The bag is designed for low temperature environments. It features an unheated design to protect equipment.



MRU 11507 Soft Transport Bag with shoulder strap 11507
The bag helps to safely transport equipment. It keeps the instruments secure during travel.



MRU 63731 Insulating Sleeve for the arctic transport case 63731
The sleeve prevents extreme changes in temperature. It is designed for the low temperature travel case.



MRU 62931 ABS Transport case with large compartment 62931
The case protects equipment during travel. It features a large compartment for better storage.



MRU 63319 ABS Transport Case 63319
The case improves transportation and storage. The durable construction prevents damage.



MRU 63729 Transport Bag, small 63729
The bag improves the mobility for equipment. It is designed for smaller instruments.



MRU 64618 Infrared Module, CO2, 0 to 40% 64618
The infrared module is ideal for CO2 gas measurement. It has a measurement range of 0 to 40%.



MRU 65648 Infrared Module, CO2, CxHy 65648
The module uses infrared to measure gas concentrations. It is designed as an accessory for analyzers.



MRU 59292 Exchangeable Probe Tube, 20 x 0.3" 59292
The tube improves access to small locations of the system. It increases the range a probe can reach for measurements.



MRU 55674 Exchangeable Probe Tube, 1,200°F 55674
The tube provides transport for samples to an analyzer. It is designed to prevent leaks.



MRU 62747 Industrial Fluegas Probe Handle with 16' hose 62747
Compatible with the AMPRO Plus and OPTIMA 7, this industrial flue-gas probe handle features a 16' (5 m) hose.



MRU 63927 Inclonel Exchangeable Fluegas Probe, 20 x 0.4" 63927
Compatible with the AMPRO Plus and OPTIMA 7, this inclonel exchangeable flue-gas probe features a dimension of 20 x 0.4" (50.8 x 1.01 cm).



MRU 63320 High Temperature Probe with ceramic probe tube, ≤3000°F, 40 x 0.4" 63320
Compatible with the Ampro Plus series handheld analyzers, this high-temperature probe features a ceramic probe tube. In addition, this probe is 40 x 0.4" (1000 x 10 mm) long and is for temperatures up to 3000°F (1700°C).



MRU 60813 Exchangeable Probe Tube with sintered metal filter and cone, ≤932°F, 30 x 0.4" 60813
Ideal for use with an industrial probe handle, this exchangeable probe tube is made from high-grade steel and includes a sintered metal filter and a cone. In addition, this probe tube is 30 x 0.4" (762 x 10 mm) long and is for temperatures up to 932°F (500°C).



MRU 56738 Exchangeable Probe Tube with cone, ≤2000°F, 60 x 0.4" 56738
Ideal for use with an industrial probe handle, this exchangeable probe tube is made from inconel and includes a cone. In addition, this probe tube is 80 x 0.4" (2000 x 10 mm) long and is for temperatures up to 2000°F (1100°C).



MRU 61518 Combustion Air Temperature Probe, 12" 61518
Compatible with the Ampro Plus series handheld analyzers, this combustion air temperature probe is 12" (300 mm) long and is an accessory or replacement part.



MRU 62928 Combustion Air Temperature Probe, 8" 62928
Compatible with the Ampro Plus series handheld analyzers, this combustion air temperature probe is 8" (200 mm) long and is an accessory or replacement part.



MRU 62741 Industrial Probe Handle 62741
The handle provides a secure grip for measuring probes. It is designed to connect to several lines and probes.



MRU 11182 Detector Probe with handle and cable 11182
The probe extends the reach of analyzer instruments. The long handle keeps the user further from potential danger.



MRU 56737 Exchangeable Probe Tube, 40 x 0.4" 56737
The tube transfers samples through a system to an analyzer. It features enhanced length for more opportunities.



MRU 60815 Exchangeable Probe Tube, 60 x 0.4" 60815
The tube connects the probe to the analyzer. It features a durable construction.



MRU 60814 Exchangeable Probe Tube, high grade steel, 40 x 0.4" 60814
The tube provides more measurement opportunities for probes. It is designed to endure high temperatures.



MRU 55672 Exchangeable Probe Tube, high grade steel, 30 x 0.4" 55672
The tube provides easy access for analyzers to sample materials. It is made to withstand rigorous environments.



MRU 60626 Exchangeable Inconel Probe Tube, 30 x 0.4" 60626
The tube provides enhanced mobility for probes. The durable design prevents malfunctions.



MRU 55464 Exchangeable Probe Tube, 80 x 0.4" 55464
The probe tube moves samples to the analyzer safely. It is made to be durable and endure operation.



MRU 55583 Exchangeable Probe Tube, 12 x 0.3" 55583
The tube helps transport samples to the analyzer. It is made to withstand damage in the workplace.



MRU 62934 Combustion Air Temperature Probe 62934
The probe gathers data for analysis. It is calibrated to monitor temperatures.



MRU 63316 Differential Pressure Sensor 63316
The sensor monitors pressure within a system. It is designed to offer continuous measurements.



MRU 64110 Sensor Option, NO2 64110
The sensor is an accessory or a replacement part. It senses NO2 with a high degree of accuracy.



MRU 63060 SO2 Sensor for the Ampro Plus, 0 to 2000/5000 ppm 63060
Compatible with the Ampro Plus series handheld analyzers, this SO2 sensor is an accessory or replacement part. In addition, this sensor measures sulfur dioxide in a range from 0 to 2000/5000 ppm.



MRU 63139 Gas Flow Velocity Sensor using pitot tubes 63139
The sensor determines how quickly gas is moving through a system. It features pitot tubes for improved accuracy.



MRU 63134 AMPRO CO Sensor 63134
The sensor determines the amount of CO in the system. It features a reduced range to improve the resolution.



MRU 12121 400GD IR Temperature Sensor 12121
The sensor calculates temperature in a system. It uses infrared to gather accurate data.



MRU 11191 400GD Sensor, stack moisture test 11191
The sensor determines anomalies with moisture in a system. It can be quickly installed between operations.



MRU 11733 400GD C3H8 and H2 Sensor 11733
The gas sensor locates leaks and anomalies. It is easily installed to fit the operation.



MRU 11190 400GD Sensor, refrigerant 11190
The sensor determines refrigerant leaks. It is easily installed in the compatible gas detector.



MRU 11922 Climate Sensor 11922
The sensor provides data on the climate of a system. It covers a wide range of data without losing accuracy.



MRU 11591 Attachable Gas Leak Probe Head 11591
The probe head provides valuable durability and accuracy. It easily attaches to improve the reliability of the probe.



MRU 12130 CO Sensor for the 400GD 12130
The sensor tracks CO concentration in the system. It operates as an additional accessory for a gas detector.



MRU 12623 400GD Sensor, CO2 12623
The sensor generates data based on the composition of the atmosphere. It is calibrated to focus on CO2 for greater accuracy.



MRU 63058 AMPRO NO Sensor 63058
The sensor upgrades the efficiency of gas analyzers. It is calibrated to measure NO in a system.



MRU 11138 CH4 Sensor for the 400GD 11138
The sensor detects leaks in gas lines. The durable design is not intended for explosive regions.



MRU 63133 AMPRO CO Sensor Software Option 63133
The software alters the range and accuracy of the sensor. It is designed for carbon monoxide sensors.



MRU 11183 SO2 Low Software Option, 0 to 300 ppm 11183
Compatible with the Ampro Plus series handheld analyzers, this SO2 low software option is an accessory. In addition, this option requires an SO2 sensor and measures nitric dioxide with a range of 0 to 300 ppm.



MRU 65647 NO2 Low Software Option, 0 to 100 ppm 65647
Compatible with the Ampro Plus series handheld analyzers, this NO2 low software option is an accessory. In addition, this option requires a NO2 sensor and measures nitric dioxide in a range from 0 to 100 ppm.



MRU 64158 Automatic Measurement with data storage 64158
The measurement device allows for user determination of average value. Data is storable on SD cards.



MRU 10539 Full Version Software, MRU4win 10539
The software improves data collection and analysis. It generates real time data to enhance accuracy.



MRU 63135 AMPRO NO Sensor Software Option 63135
The software adjusts the settings of the sensors. It refines the process for greater accuracy.



MRU 13885 Service and Cleaning Kit with water stop filter 13885
Compatible with the Ampro Plus series handheld analyzers, this service and cleaning kit includes a water stop filter.



MRU 63140USW Spare Part Set for the optimax with water stop filter 63140USW
Compatible with the Optimax series biogas analyzer, this spare part set includes o-rings, a filter, a condensate show glass, and a water stop filter.



MRU 63218 Shoulder Strap for the optimax 63218
Compatible with the Optimax series biogas analyzer, this shoulder strap is an accessory or replacement part.



MRU 12698 LED Lamp, 21 lumen, 5,000 K 12698
The lamp provides illumination for gas detectors. It generates a steady light for each process.



MRU 63677 IR Printer 63677
The printer improves recording capacity during operation. It is designed to work with manometers and gas analyzers.



Poser une question sur le MRU Ampro Plus Analyseur de combustion/émission, O2/CO

Plus de produits MRU



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.