L'indicateur à cadran mesure avec une précision de 0.001 mm. Il est conçu avec un dos plat et une broche en acier inoxydable à haute résistance.
L'indicateur à cadran mesure avec une précision de 0.001 mm. Il est conçu avec un dos plat et une broche en acier inoxydable à haute résistance.
Monitor readouts with the Mitutoyo 2119SB-10 Series 2 Standard Dial Indicator with flat back. The face yields measurements down to the nearest 0.001 mm and is protected from moisture and damage by an O-ring and a scratch- and chemical-resistant coating along the crystal. Designed with a high-strength spindle, carbide contact point and stainless-steel grand gear, this dial is made to last.
Caractéristiques
| Supported Measurement Unit(s) | mm |
| Measurement Range | 5 mm per 0.2 mm revolution |
| Accuracy | 0.01 mm |
| Dial Reading | 0 to 100 to 0 |
| Dial Color | White |
| Graduation Measurements | Millimeters |
| Measuring Force | 1.5 N or less |
| Product Length | 2.2" (57 mm) outside diameter |
| Supported Measurement Unit(s) | mm |
| Measurement Range | 5 mm per 0.2 mm revolution |
| Accuracy | 0.01 mm |
| Dial Reading | 0 to 100 to 0 |
| Dial Color | White |
| Graduation Measurements | Millimeters |
| Measuring Force | 1.5 N or less |
| Product Length | 2.2" (57 mm) outside diameter |
