Measures oxygen in closed systems, this oxygen analyzer with 8.3";; (210 mm) probe has a 16.4' (5 m) cable with fittings. Takes oxygen concentration measurement with temperatures of -148 to 752°F (-100 to 400°C). In addition, it uses a unique closed-loop measurement system.
Measures oxygen in closed systems, this oxygen analyzer with 8.3";; (210 mm) probe has a 16.4' (5 m) cable with fittings. Takes oxygen concentration measurement with temperatures of -148 to 752°F (-100 to 400°C). In addition, it uses a unique closed-loop measurement system.
It can be configured to output measuring ranges of 0 to 25% O2 or 0 to 100% O2.
Caractéristiques
Applications
| Supply | Voltage: 24 VDC ±10% Current: 500 mA maximum at 24 VDC |
| Output | Digital: RS232 Analogue: 4 to 20 mA; load 600 Ω maximum 0 to 10 VDC; load 10 kΩ minimum |
| Housing Temperature Limits | Storage/Operating: 14 to 185°F (-10 to 85°C) |
| Permissible Gas Temperatures (Probe Tip) | Standard: -148 to 482°F (-100 to 250°C) High: -148 to 752°F (-100 to 400°C) Gas Flow Rate: 0 to 10 m/s |
| Probe Length | 8.3"; (210 mm) |
| Permissible Acceleration | Repetitive: 0.01 lbs (5 g) Incidental: 0.07 lbs (30 g) |
| Oxygen Range | Analogue output: 0.11 to 25% O2, 0.11 to 100% O2 RS232 output: 0.11 and 100% O2 |
| Accuracy After Calibration | 1% O2 |
| Repeatability After Calibration | 0.5% O2 |
| Output Resolution | Analogue 4 to 20 mA: 0.01 mA Analogue 0 to 10 VDC: 0.01 V Digital RS232: 0.01% O2 |
| Response Time | < 15 seconds |
| Warm Up Time (Prior To Sensor Operation) | 60 seconds |
| Output Stabilisation Time | ~ 180 seconds |
| Cable Length | 16.4' (5 m) |
Analyzer
Cable
Fittings
| Supply | Voltage: 24 VDC ±10% Current: 500 mA maximum at 24 VDC |
| Output | Digital: RS232 Analogue: 4 to 20 mA; load 600 Ω maximum 0 to 10 VDC; load 10 kΩ minimum |
| Housing Temperature Limits | Storage/Operating: 14 to 185°F (-10 to 85°C) |
| Permissible Gas Temperatures (Probe Tip) | Standard: -148 to 482°F (-100 to 250°C) High: -148 to 752°F (-100 to 400°C) Gas Flow Rate: 0 to 10 m/s |
| Probe Length | 8.3"; (210 mm) |
| Permissible Acceleration | Repetitive: 0.01 lbs (5 g) Incidental: 0.07 lbs (30 g) |
| Oxygen Range | Analogue output: 0.11 to 25% O2, 0.11 to 100% O2 RS232 output: 0.11 and 100% O2 |
| Accuracy After Calibration | 1% O2 |
| Repeatability After Calibration | 0.5% O2 |
| Output Resolution | Analogue 4 to 20 mA: 0.01 mA Analogue 0 to 10 VDC: 0.01 V Digital RS232: 0.01% O2 |
| Response Time | < 15 seconds |
| Warm Up Time (Prior To Sensor Operation) | 60 seconds |
| Output Stabilisation Time | ~ 180 seconds |
| Cable Length | 16.4' (5 m) |
Analyzer
Cable
Fittings
