Meriam 30EBX25-TM-60-A Offers

Features

• Manometer body is of aluminum channel construction
• 7/16" outside diameter glass tubing is yoke packed with viton gaskets at each end block and is supported at spaced intervals to prevent tube distortion
• Two Ω" female pipe connections are provided on the top side of the well; one outlet is normally used for the high pressure manometer connection, while the other, provided with a plug, is used as the well fill connection
• Scale is graduated in linear inches and tenths of manometer fluid
• Scale is graduated to correct for the drop in well level and is the full width of the instrument
• Scale is adjustable for zero indicating fluid level by means of a non-slip, flexible shaft adjustment located in the lower end block and operated from the front of the instrument
• Transparent plexiglass cover protects the unit from dust and moisture
• Standard pressure connections in the upper end block and at the manometer well for connecting the instrument are Ω" female pipe connections
• Suitable drain, fill and vent plugs are furnished with each unit
• Red gauge oil (Model A-103) not supplied with manometer, must be ordered separately