Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

3983 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

3983 COMMENTAIRES
Megger brand logo

Power on

LIVRAISON GRATUITE SUR COMMANDES DE PLUS DE $99*

Power on

Megger DLRO10-NLS Digital Low Resistance Ohmmeter, 10A, No Leads

Modèle: DLRO10 | No. de commande: 1006-660 | CUP: 5036175231128

Megger DLRO10-NLS Digital Low Resistance Ohmmeter, 10A, No Leads-

Plus de produits Megger

Demander à un expert

Megger DLRO10-NLS Digital Low Resistance Ohmmeter, 10A, No Leads

Modèle: DLRO10 | No. de commande: 1006-660 | CUP: 5036175231128

The DLRO10-NLS is a fully automatic instrument, selecting the most suitable test current up to 10 A DC to measure resistance from 0.1 micro ohm to 2000 ohms, on one of seven ranges. Built into a strong, lightweight case that is equally suitable for use in the field or in the laboratory. Light enough to be worn around the neck, it is small enough to be taken into areas that were previously too small to access.

The DLRO10-NLS is a fully automatic instrument, selecting the most suitable test current up to 10 A DC to measure resistance from 0.1 micro ohm to 2000 ohms, on one of seven ranges. Built into a strong, lightweight case that is equally suitable for use in the field or in the laboratory. Light enough to be worn around the neck, it is small enough to be taken into areas that were previously too small to access.

Prix régulier $4875.00 CAD
Disponibilité 6 à 7 semaines
Quantité

Traceable Calibration Certificate Icon

Certificat d’étalonnage de traçabilité pour votre 1006-660

Traceable Calibration Certificate Icon

Certificat d’étalonnage de traçabilité pour votre 1006-660

Accessoires recommandées

Megger DH4-C DLRO Duplex Connect Handspike Lead Set, 5'-

Megger DH4-C DLRO Duplex Connect Handspike Lead Set, 5'

DH4-C

Megger DLRO10 Offers

Features

  • Provides accurate results in under three seconds
  • Automatically detects continuity in potential and current connections
  • Offers multiple operating modes including fully automatic
  • Automatic current reversal cancels standing emfs
  • Uses four-terminal measurement to eliminate errors caused by lead resistances
  • On-board memory stores up to 700 sets of results and notes
  • User-selectable high and low limits allow for go-no-go testing
  • Automatically detects continuity in P and C circuits, preventing erroneously high readings
  • Checks for undue noise during measurement, reducing possibility of recording incorrect result
  • Alpha-numeric keypad allows for entering of test notes
  • Interchangeable test lead terminations
  • Auto-ranging and manual options
  • Bright LCD display facilitates operation in poorly lit environments
  • Data may be transferred to PC via RS232 connector
  • Lightweight and portable size allows for use in tight places
  • Output provided for printer connection
  • Powered by rechargeable NiMH battery
  • Test leads sold separately

Megger DLRO10 Specifications

Test Current Accuracy +/-10%
Test Current Stability <10 ppm per second
Voltmeter Input Impedance >200 Kilohms
Max. Altitude 2000m
Safety In accordance with IEC61010-1, CATIII 600V - only when DH6 leads are used
EMC IP65 case closed, IP54 battery operation
Dimensions 220 x 100 x 237mm
Weight 2.6kg

What's included with the Megger DLRO10

  • Digital Low Resistance Ohmmeter (1006-659)
  • 7 Ah NiMH Battery Module (6121-492)
  • Battery Charger (6280-333)
  • Cigar Lighter Adapter for Battery Charging (6280-332)
  • User Guide
Article technique Comment protéger et entretenir efficacement les éoliennes

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Megger DLRO10-NLS Digital Low Resistance Ohmmeter, 10A, No Leads.

Megger DH4-C DLRO Duplex Connect Handspike Lead Set, 5' DH4-C
Consisting of two 5' (1.5 m) wires and four terminal duplex probes. One lead is fitted with indicator lights, and the set is designed to be paired with the DLRO10, DLRO10X, DLRO10HD, and DLRO10HDX ohmmeters.



Poser une question sur le Megger DLRO10-NLS Digital Low Resistance Ohmmeter, 10A, No Leads

Megger DLRO10 Offers

Features

  • Provides accurate results in under three seconds
  • Automatically detects continuity in potential and current connections
  • Offers multiple operating modes including fully automatic
  • Automatic current reversal cancels standing emfs
  • Uses four-terminal measurement to eliminate errors caused by lead resistances
  • On-board memory stores up to 700 sets of results and notes
  • User-selectable high and low limits allow for go-no-go testing
  • Automatically detects continuity in P and C circuits, preventing erroneously high readings
  • Checks for undue noise during measurement, reducing possibility of recording incorrect result
  • Alpha-numeric keypad allows for entering of test notes
  • Interchangeable test lead terminations
  • Auto-ranging and manual options
  • Bright LCD display facilitates operation in poorly lit environments
  • Data may be transferred to PC via RS232 connector
  • Lightweight and portable size allows for use in tight places
  • Output provided for printer connection
  • Powered by rechargeable NiMH battery
  • Test leads sold separately
En savoir plus...

Megger DLRO10 Specifications

Test Current Accuracy +/-10%
Test Current Stability <10 ppm per second
Voltmeter Input Impedance >200 Kilohms
Max. Altitude 2000m
Safety In accordance with IEC61010-1, CATIII 600V - only when DH6 leads are used
EMC IP65 case closed, IP54 battery operation
Dimensions 220 x 100 x 237mm
Weight 2.6kg

What's included with the Megger DLRO10

  • Digital Low Resistance Ohmmeter (1006-659)
  • 7 Ah NiMH Battery Module (6121-492)
  • Battery Charger (6280-333)
  • Cigar Lighter Adapter for Battery Charging (6280-332)
  • User Guide
Article technique Comment protéger et entretenir efficacement les éoliennes

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Megger DLRO10-NLS Digital Low Resistance Ohmmeter, 10A, No Leads.

Megger DH4-C DLRO Duplex Connect Handspike Lead Set, 5' DH4-C
Consisting of two 5' (1.5 m) wires and four terminal duplex probes. One lead is fitted with indicator lights, and the set is designed to be paired with the DLRO10, DLRO10X, DLRO10HD, and DLRO10HDX ohmmeters.



Poser une question sur le Megger DLRO10-NLS Digital Low Resistance Ohmmeter, 10A, No Leads

Plus de produits Megger

Comment protéger et entretenir efficacement les éoliennes


  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.