These hall effect current clamps are designed for use with MPQ1000 and MPQ2000 power quality analyzers, as well as the PA9 series. They're powered by the main unit and there is no need for additional connections or batteries.
These hall effect current clamps are designed for use with MPQ1000 and MPQ2000 power quality analyzers, as well as the PA9 series. They're powered by the main unit and there is no need for additional connections or batteries.
This is self-identifying when used on MPQ.
Features
| Current Range | 600A |
| Measurement Range | 1 to 400A AC, (600A peak), 1 to 600A DC |
| Frequency Range | dc to 10kHz @ -3 dB |
| Max. Working Voltage | 600V rms |
| Output Signal | 1mV/A |
| Crest Factor (Mid-range) | 9 |
| Style | Clamp |
| Length | 9ft (2.74m) cable |
| Inside Diameter, Max | 2in (50.8mm) |
| Accuracy | 1.5% of rdg, ±1A (1 to 100A), 2% of rdg (100 to 400A), 2.5% of rdg, (400 to 600A DC only) |
| Phase Shift | 10 to 200A: ≤2.5°; 200 to 400A: ≤2°; 45 to 65Hz |
| Current Range | 600A |
| Measurement Range | 1 to 400A AC, (600A peak), 1 to 600A DC |
| Frequency Range | dc to 10kHz @ -3 dB |
| Max. Working Voltage | 600V rms |
| Output Signal | 1mV/A |
| Crest Factor (Mid-range) | 9 |
| Style | Clamp |
| Length | 9ft (2.74m) cable |
| Inside Diameter, Max | 2in (50.8mm) |
| Accuracy | 1.5% of rdg, ±1A (1 to 100A), 2% of rdg (100 to 400A), 2.5% of rdg, (400 to 600A DC only) |
| Phase Shift | 10 to 200A: ≤2.5°; 200 to 400A: ≤2°; 45 to 65Hz |
