These power quality current clamp transformers are for use with MPQ1000 and MPQ2000 power quality analyzers, as well as the PA9 series.
These power quality current clamp transformers are for use with MPQ1000 and MPQ2000 power quality analyzers, as well as the PA9 series.
This is self-identifying when used on MPQ.
Features
| Current Range | 1,000A |
| Measurement Range | 10 to 1,000A |
| Frequency Range | 30Hz to 5kHz |
| Max. Working Voltage | 600V rms |
| Output Signal | 1mV/A |
| Crest Factor (Mid-range) | 9 |
| Style | Clamp |
| Length | 9ft (2.74m) cable |
| Inside Diameter, Max | 2in (50.8mm) |
| Accuracy | Accuracy @ 0.1 to 10A: ≤ 3% of rdg ±0.1A, Accuracy @ 10 to 100A: ≤ 0.75% of rdg ±0.25A, Accuracy @ 100 to 1,200A: ≤0.5% of rdg ±0.5A |
| Phase Shift | 0.01 to 10A: not specified, 10A ≤3°, 50A ≤1.5°, 200A ≤0.75°, 1,000A ≤0.5° |
| Current Range | 1,000A |
| Measurement Range | 10 to 1,000A |
| Frequency Range | 30Hz to 5kHz |
| Max. Working Voltage | 600V rms |
| Output Signal | 1mV/A |
| Crest Factor (Mid-range) | 9 |
| Style | Clamp |
| Length | 9ft (2.74m) cable |
| Inside Diameter, Max | 2in (50.8mm) |
| Accuracy | Accuracy @ 0.1 to 10A: ≤ 3% of rdg ±0.1A, Accuracy @ 10 to 100A: ≤ 0.75% of rdg ±0.25A, Accuracy @ 100 to 1,200A: ≤0.5% of rdg ±0.5A |
| Phase Shift | 0.01 to 10A: not specified, 10A ≤3°, 50A ≤1.5°, 200A ≤0.75°, 1,000A ≤0.5° |
