Power on
Power on
This is designed for precise low-resistance measurements using a 4-wire Kelvin method. It features a 100 A current rating, a wide 3" (75 mm) expandable jaw, and safety banana posts for direct multimeter connection. Comes in yellow.
This is designed for precise low-resistance measurements using a 4-wire Kelvin method. It features a 100 A current rating, a wide 3" (75 mm) expandable jaw, and safety banana posts for direct multimeter connection. Comes in yellow.
The 100 A Kelvin Clamp is designed for use with any electrical test instrument. You can connect to a multimeter using safety banana leads and built in banana posts or upgrade hard-wired lead sets by removing the dust cover to expose a 100 A stud and flying potential lead. The expandable metal jaw provides unparalleled versatility, allowing for connection to any size test specimen. With a limited lifetime warranty, this shatterproof plastic clamp is built to last!
| Jaw Opening | 3" (75 mm) |
| Connection Type | 33A safety banana posts |
| Continuous Current Rating | 100 A |
| DC Current Rating | 200 A DC (duty cycle) |
| AC High-Voltage Rating | 15kV / 500 mA AC |
| Kelvin Connection | 4-wire (two clamps) |
| Operating Temperature Range | -40 to 104°F (-40 to 40°C) |
| Material | Shatterproof plastic |
| Jaw Opening | 3" (75 mm) |
| Connection Type | 33A safety banana posts |
| Continuous Current Rating | 100 A |
| DC Current Rating | 200 A DC (duty cycle) |
| AC High-Voltage Rating | 15kV / 500 mA AC |
| Kelvin Connection | 4-wire (two clamps) |
| Operating Temperature Range | -40 to 104°F (-40 to 40°C) |
| Material | Shatterproof plastic |
