Maximum MAC3 Wind Speed Alarm and Controller, 12 or 24VDC

Modèle: MAC3

Télécharger: manual

Maximum MAC3 Wind Speed Alarm and Controller, 12 or 24VDC

Modèle: MAC3

This wind speed alarm and controller features a 12 or 24VDC design.

Prix spécial	$1040.20 CAD
Prix régulier	$1486.00 CAD
Disponibilité	2 à 3 semaines
Quantité	Quantity

Accessoires recommandées

Maximum EA075 Power Supply for MAC3 Units, 12VDC Output, 1.3A

EA075

Maximum HDW11 Hardware Pack for MAC3 Units

HDW11

Maximum WM033 Cable, 100ft

WM033

Maximum EA077 Relay Connector with 5ft Wire Pigtail

EA077

Maximum EH110 External Indoor/Outdoor Siren

EH110

Maximum EH111 External Indoor/Outdoor Siren with Strobe

EH111

Maximum MAC3 Offers

Large, easy-to-read LCD display with green on black text.

Features

Display 'Current', 'Peak' or 'Average' (2-, 5- or 10-minute) wind speed conditions
Audible warning buzzer - external speaker and strobe also available
Optional dual sensor set-up to monitor wind speeds in 2 separate locations simultaneously - up to 1,000' (304.8 m) between sensors
Dual set points (alarms) 0 to 255 mph (0 to 410.38 km/h) for each sensor: warning level: yellow; control level: red
Two relay outputs to operate external devices are available as an option - one 5A SPDT relay for each set point and each sensor
Integrated time delay and latching switch minimize risk of equipment damage due to power cycling
The MAC3 housing and the #400 anemometer are weather-tight to the IP65 standard and rated for use from -40 to 158°F (-40 to 70°C)
Password protected to prevent unintended changes to settings
Quick connection of sensor(s), power and relay cables via twist-lock connectors

Maximum MAC3 Specifications

Wind Speed Range	0 to 255 mph (0 to 410.38 km/h) in 1 mph increments
Wind Speed Accuracy	±2 mph of input and ±1 digit
Sample Rate	1.7 secs
SPDT Relays (2)	5.08 x 7.39 x 2.26" (129 x 187.8 x 57.4 mm)
LCD Display Dimensions	2.6 x 1.42" (66 x 36 mm)
Operating Temperature	-40 to 158°F (-40 to 70°C)
Buzzer	85dB(A)/10cm (min.) @ 3.1kHz
Power	12 or 24 VDC
Current Draw	With heater OFF = 120 mA Max; with heater ON = 970 mA Max

What's included with the Maximum MAC3

Wind Speed Alarm and Controller
#400 Wind Speed Sensor
100' (30.48 m) Sensor Cable
14" (35.56 cm) Straight, Stainless Steel Stub-Mast
Mast Mounting Hardware

manual pour le Maximum MAC3 Wind Speed Alarm and Controller, 12 or 24VDC

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Maximum MAC3 Wind Speed Alarm and Controller, 12 or 24VDC.

Power Supplies

Maximum EA075 Power Supply for MAC3 Units, 12VDC Output, 1.3A EA075

Designed for MAC3 units, this power supply features a 1.3A design and a 12VDC output.

Hardware Packs

Maximum HDW11 Hardware Pack for MAC3 Units HDW11

This hardware pack is made to be used with select MAC3 units.

Cables

Maximum WM033 Cable, 100ft WM033

This cable measures 100ft (30.48m).

Relay Connectors

Maximum EA077 Relay Connector with 5ft Wire Pigtail EA077

This relay connector features a 5ft wire pigtail.

Sirens

Maximum EH110 External Indoor/Outdoor Siren EH110

This external siren is designed for indoor or outdoor use.

Maximum EH111 External Indoor/Outdoor Siren with Strobe EH111

This external siren is designed for indoor or outdoor use and features a strobe feature.

Poser une question sur le Maximum MAC3 Wind Speed Alarm and Controller, 12 or 24VDC

Description ➕➖

Maximum MAC3 Offers

Large, easy-to-read LCD display with green on black text.

Features

Display 'Current', 'Peak' or 'Average' (2-, 5- or 10-minute) wind speed conditions
Audible warning buzzer - external speaker and strobe also available
Optional dual sensor set-up to monitor wind speeds in 2 separate locations simultaneously - up to 1,000' (304.8 m) between sensors
Dual set points (alarms) 0 to 255 mph (0 to 410.38 km/h) for each sensor: warning level: yellow; control level: red
Two relay outputs to operate external devices are available as an option - one 5A SPDT relay for each set point and each sensor
Integrated time delay and latching switch minimize risk of equipment damage due to power cycling
The MAC3 housing and the #400 anemometer are weather-tight to the IP65 standard and rated for use from -40 to 158°F (-40 to 70°C)
Password protected to prevent unintended changes to settings
Quick connection of sensor(s), power and relay cables via twist-lock connectors

Specifications ➕➖

Maximum MAC3 Specifications

Wind Speed Range	0 to 255 mph (0 to 410.38 km/h) in 1 mph increments
Wind Speed Accuracy	±2 mph of input and ±1 digit
Sample Rate	1.7 secs
SPDT Relays (2)	5.08 x 7.39 x 2.26" (129 x 187.8 x 57.4 mm)
LCD Display Dimensions	2.6 x 1.42" (66 x 36 mm)
Operating Temperature	-40 to 158°F (-40 to 70°C)
Buzzer	85dB(A)/10cm (min.) @ 3.1kHz
Power	12 or 24 VDC
Current Draw	With heater OFF = 120 mA Max; with heater ON = 970 mA Max