Featuring rugged stainless steel construction and PTFE insulation, the ThermoVault Max is a high-temperature thermal barrier designed to protect the HiTemp140-M12, HiTemp140-FP, and HiTemp140-PT data loggers. Moreover, it can endure up to 752°F (400°C) in dry heat applications and 482°F (250°C) in wet environments.
Featuring rugged stainless steel construction and PTFE insulation, the ThermoVault Max is a high-temperature thermal barrier designed to protect the HiTemp140-M12, HiTemp140-FP, and HiTemp140-PT data loggers. Moreover, it can endure up to 752°F (400°C) in dry heat applications and 482°F (250°C) in wet environments.
With unparalleled time versus temperature performance, the ThermoVault Max provides a best-in-class solution for the harshest of applications. Designed to endure extreme temperature monitoring environments such as furnace profiling, geothermal down-hole recording, dry heat sterilization and oven data logging.
To use the ThermoVault Max, configure and insert any compatible MadgeTech HiTemp140 data logger, hand twist the enclosure cap until securely sealed, and the device is ready to be deployed. MadgeTech also offers a Dry Heat Sterilization Kit including the ThermoVault Max barrier, HiTemp140-M12 Data Logger and M12 Depyrogenation probe.
The ThermoVault Max is built for use in harsh applications that require extreme temperature monitoring, such as depyrogenation, food processing, oven monitoring, geothermal down-hole recording, and furnace profiling.
Caractéristiques
Applications
| Operating Environment | Refer to the Time vs. Temperature Chart on next page |
| Enclosure Material | 316 Stainless Steel PTFE Silicone |
| Enclosure Dimensions | 1.75 OD x 9.6" L (44.45 OD x 243.8 mm L) |
| Enclosure Weight | 3.0 lb (1350 g) |
| IP Rating | IP68 rating may be obtained with the Seal Kit installed from -76 to 482°F (-60 to 250°C) Rapid temperature fluctuations may cause ingress |
| Compatible Data Loggers | HiTemp140-FP HiTemp140-PT HiTemp140-M12* (probe dependent) |
| Max Sustainable Pressure | 60 PSIA |
| Operating Environment | Refer to the Time vs. Temperature Chart on next page |
| Enclosure Material | 316 Stainless Steel PTFE Silicone |
| Enclosure Dimensions | 1.75 OD x 9.6" L (44.45 OD x 243.8 mm L) |
| Enclosure Weight | 3.0 lb (1350 g) |
| IP Rating | IP68 rating may be obtained with the Seal Kit installed from -76 to 482°F (-60 to 250°C) Rapid temperature fluctuations may cause ingress |
| Compatible Data Loggers | HiTemp140-FP HiTemp140-PT HiTemp140-M12* (probe dependent) |
| Max Sustainable Pressure | 60 PSIA |
