Split core current transformer monitors from 1.5 to 200A with fixed setpoints at 0.15A max and no status LEDs.
Split core current transformer monitors from 1.5 to 200A with fixed setpoints at 0.15A max and no status LEDs.
Features
| Sensor Power | Induced from monitored conductor |
| Amperage Range | 0.15 to 200 A Continuous |
| Status Output Ratings | N.O. 1 A at 30 VAC/DC not polarity sensitive |
| Insulation Class | 600 VAC RMS (UL), 300 VAC RMS (CE) |
| Setpoint | Fixed at 0.15 A maximum (60 Hz) |
| Frequency | 50/60 Hz |
| Temperature Range | 5 to 104°F (-15 to 40°C) |
| Humidity Range | 10 to 90% RH non-condensing |
| Off State Resistance | Open switch represents 1+ MΩ |
| On State Resistance | Closed switch represents <200 mΩ |
| Terminal Block | Wire Size: 14 to 24 AWG (2.1 to 0.2 mm⊃2) Torque: 3.5 to 4.5 in-lb (0.4 to 0.5 N-m) |
| Agency Approvals | UL508, CE: EN61010-1 |
| Installation Category | Cat. III, pollution degree 2 |
| Sensor Power | Induced from monitored conductor |
| Amperage Range | 0.15 to 200 A Continuous |
| Status Output Ratings | N.O. 1 A at 30 VAC/DC not polarity sensitive |
| Insulation Class | 600 VAC RMS (UL), 300 VAC RMS (CE) |
| Setpoint | Fixed at 0.15 A maximum (60 Hz) |
| Frequency | 50/60 Hz |
| Temperature Range | 5 to 104°F (-15 to 40°C) |
| Humidity Range | 10 to 90% RH non-condensing |
| Off State Resistance | Open switch represents 1+ MΩ |
| On State Resistance | Closed switch represents <200 mΩ |
| Terminal Block | Wire Size: 14 to 24 AWG (2.1 to 0.2 mm⊃2) Torque: 3.5 to 4.5 in-lb (0.4 to 0.5 N-m) |
| Agency Approvals | UL508, CE: EN61010-1 |
| Installation Category | Cat. III, pollution degree 2 |
