Designed for ⅛ DIN panel meters, counters, or timers providing communication to an external PC, a serial input remote display, or other devices through an RS232 connection. Ideal for point-to-point data with isolation from meter and power grounds.
Designed for ⅛ DIN panel meters, counters, or timers providing communication to an external PC, a serial input remote display, or other devices through an RS232 connection. Ideal for point-to-point data with isolation from meter and power grounds.
Compatible with the Laureate ⅛ DIN instruments, this RS232 serial communication board provides point-to-point communication via a single data line or set to latch mode allowing a single data transfer controlled by another device.
Caractéristiques
| Data Rates | 300, 600, 1200, 2400, 4800, 9600 baud |
| Number of Devices on Data Line | 1 (point-to-point) |
| Connector | Single RJ11 jack |
| Maximum Line Length | 50 to 1000' (15 to 300 m) depending on cable and data rate |
| Isolation | 250 V rms working, 2.3 kV rms per 1 minute test |
| ESD Protection | 15 kV per IEC 1000-4-2 |
| EMI Immunity | 10 V/m per IEC 1000-4-3 |
| EFT Protection | 2 kV per IEC 1000-4-4 |
| Short Circuit Protection | Continuous |
| Selectable Protocols | Modbus RTU, Custom ASCII |
| Data Rates | 300, 600, 1200, 2400, 4800, 9600 baud |
| Number of Devices on Data Line | 1 (point-to-point) |
| Connector | Single RJ11 jack |
| Maximum Line Length | 50 to 1000' (15 to 300 m) depending on cable and data rate |
| Isolation | 250 V rms working, 2.3 kV rms per 1 minute test |
| ESD Protection | 15 kV per IEC 1000-4-2 |
| EMI Immunity | 10 V/m per IEC 1000-4-3 |
| EFT Protection | 2 kV per IEC 1000-4-4 |
| Short Circuit Protection | Continuous |
| Selectable Protocols | Modbus RTU, Custom ASCII |
