Designed to increase the measuring capability of your clamp meters. With the use of the MULTI-TRAN, you can not only extend current ranges, but clamp on a conductor of a larger diameter.
Designed to increase the measuring capability of your clamp meters. With the use of the MULTI-TRAN, you can not only extend current ranges, but clamp on a conductor of a larger diameter.
Discontinué!
Ce produit a été discontinué et n’est plus disponible.
Il n’y a pas de remplacement direct, mais nous vous recommandons:
Vous ne trouvez pas ce que vous cherchez? Nous ferons une recherche et vous aiderons à trouver ce dont vous avez besoin.
Designed and tested to CAT III 300V/CAT II 600V and pollution degree 2 specified by the international safety standard IEC 61010. Cannot be used for leakage current measurements.
| Measuring Range | 0 to 3000A AC |
| Input/Output | 10:01 |
| Accuracy | ±2% of input of ±0.5A |
| Withstand Voltage | 3700V AC for one minute |
| Dimensions | MULTI-TRAN (except pick-ip coil): 317 x 150 x 30mm Pick-up Coil: 40 x 45 x 10mm |
| Weight | Approx. 750g |
| Conductor Size | 100mm max. diameter 100 x 150mm Bus-Bar |
| Frequency | 50Hz / 60Hz |
| Duty Cycle | Continuous: 0 to 1000A 10 minutes for: 1000 to 1500A 30 seconds for: 1500 to 3000A |
| Measuring Range | 0 to 3000A AC |
| Input/Output | 10:01 |
| Accuracy | ±2% of input of ±0.5A |
| Withstand Voltage | 3700V AC for one minute |
| Dimensions | MULTI-TRAN (except pick-ip coil): 317 x 150 x 30mm Pick-up Coil: 40 x 45 x 10mm |
| Weight | Approx. 750g |
| Conductor Size | 100mm max. diameter 100 x 150mm Bus-Bar |
| Frequency | 50Hz / 60Hz |
| Duty Cycle | Continuous: 0 to 1000A 10 minutes for: 1000 to 1500A 30 seconds for: 1500 to 3000A |
