La palette est ajustée au bout d'un bras de balance qui est en contact direct avec un ressort à feuille pré-tendu. Un aimant permanent est situé à l'autre extrémité du bras de balance. L'aimant met en marche un contact roseau situé à l'intérieur d'un boîtier en mouvement.
La palette est ajustée au bout d'un bras de balance qui est en contact direct avec un ressort à feuille pré-tendu. Un aimant permanent est situé à l'autre extrémité du bras de balance. L'aimant met en marche un contact roseau situé à l'intérieur d'un boîtier en mouvement.
The KOBOLD flow monitor types PSE and PSR are simple, reasonably-priced and reliable monitors of fluid motions. Depending on the flow velocity/flow throughput, the baffle plate is deflected and it moves over the balance arm putting the permanent magnet into the operating range of the reed contact mounted outside the process fluid.
Caractéristiques
| Maximum Temperature | 230°F |
| Maximum Pressure | 1450 psig for brass 3600 psig for stainless steel |
| Maximum Flow | 5x switching range increasing |
| Contact | Reed-switch SPST, N/O or N/C |
| Contact Ratings | 50 V A (50 W, 250 V AC, 1.5 A) |
| Orientation | Horizontal |
| Materials | |
| Paddle | 304 stainless steel |
| Leaf Spring | 301 stainless steel |
| Beam | 301 stainless steel |
| Locking Plate | Brass or 304 stainless steel |
| Contact Housing | Polyamid, glass reinforced, NEMA 4 rated |
| O-Ring | Buna-N for brass Viton for stainless steel |
| Maximum Temperature | 230°F |
| Maximum Pressure | 1450 psig for brass 3600 psig for stainless steel |
| Maximum Flow | 5x switching range increasing |
| Contact | Reed-switch SPST, N/O or N/C |
| Contact Ratings | 50 V A (50 W, 250 V AC, 1.5 A) |
| Orientation | Horizontal |
| Materials | |
| Paddle | 304 stainless steel |
| Leaf Spring | 301 stainless steel |
| Beam | 301 stainless steel |
| Locking Plate | Brass or 304 stainless steel |
| Contact Housing | Polyamid, glass reinforced, NEMA 4 rated |
| O-Ring | Buna-N for brass Viton for stainless steel |