Capable of data logging multiple parameters simultaneously including CO, CO2, temperature and relative humidity. Features built in memory capable of storing multiple point measurements.
Capable of data logging multiple parameters simultaneously including CO, CO2, temperature and relative humidity. Features built in memory capable of storing multiple point measurements.
Discontinué!
Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :
Handheld Indoor Air Quality Monitor and Data Logger
Handheld Indoor Air Quality Monitor and Data Logger
The Kanomax IAQ Monitor 2211 features quick start-up and high accuracy in measuring carbon dioxide and carbon monoxide concentration levels in the environment. Temperature and humidity are also simultaneously measured in ah handy lightweight design.
Caractéristiques
The Kanomax IAQ Monitor 2211 features quick start-up and high accuracy in measuring carbon dioxide and carbon monoxide concentration levels in the environment. Temperature and humidity are also simultaneously measured in ah handy lightweight design.
Caractéristiques
| CO |
Range | 0 to 500PPM |
| Accuracy | +/-3% of reading or +/-3PPM whichever is greater | |
| Resolution | 0.1PPM: 0-99PPM 1PPM: 100-500 PPM |
|
| CO2 |
Range | 0 to 5000PPM |
| Accuracy | +/-3% of reading or+/-50PPM whichever is greater | |
| Resolution | 1PPM | |
| Temperature |
Range | - 4 to 140F (-20 to 60C) |
| Accuracy | +/- 1F (+/-0.5C) | |
| Resolution | 0.1F (0.1C ) |
|
| Relative Humidity |
Range | 2 to 98%RH |
| Accuracy | 2 to 80%RH:±2%RH, 80 to 98%RH:±3%RH | |
| Resolution | 0.1%RH |
|
| Function |
Normal Mode | Normal measuring (do not store and calculate the data.) Relative humidity, CO, CO2, Dew point, Wet bulb temperature, Absolute humidity and Humidity Ratio |
| Calculation Mode | Store the data, and calculate the maximum, minimum and average value. | |
| % OA Mode | Measure ventilation ratio (Ask for ventilation ratio by calculating from temperature and CO2 value) | |
| Data Output Mode | Perform re-calculation of stored data and output of data to PC and Printer. | |
| Calibration Mode | Perform the calibration of CO and CO2. |
|
| Output |
Digital | RS232C |
| Analog (option) | DC 0 to 1V |
|
| Power Supply | Power Supply | AAA Battery x 4 (Mn, Alkaline, or Ni-Cd) |
| Dimensions |
Unit | 3.5" x 7.5" x 2.0" |
| Probe | Length: 12.5 inch / Diameter: 1.0 inch |
|
| Weight (including batteries) | Weight (including batteries) | Approx. 1.2 lbs (500g) |
| CO |
Range | 0 to 500PPM |
| Accuracy | +/-3% of reading or +/-3PPM whichever is greater | |
| Resolution | 0.1PPM: 0-99PPM 1PPM: 100-500 PPM |
|
| CO2 |
Range | 0 to 5000PPM |
| Accuracy | +/-3% of reading or+/-50PPM whichever is greater | |
| Resolution | 1PPM | |
| Temperature |
Range | - 4 to 140F (-20 to 60C) |
| Accuracy | +/- 1F (+/-0.5C) | |
| Resolution | 0.1F (0.1C ) |
|
| Relative Humidity |
Range | 2 to 98%RH |
| Accuracy | 2 to 80%RH:±2%RH, 80 to 98%RH:±3%RH | |
| Resolution | 0.1%RH |
|
| Function |
Normal Mode | Normal measuring (do not store and calculate the data.) Relative humidity, CO, CO2, Dew point, Wet bulb temperature, Absolute humidity and Humidity Ratio |
| Calculation Mode | Store the data, and calculate the maximum, minimum and average value. | |
| % OA Mode | Measure ventilation ratio (Ask for ventilation ratio by calculating from temperature and CO2 value) | |
| Data Output Mode | Perform re-calculation of stored data and output of data to PC and Printer. | |
| Calibration Mode | Perform the calibration of CO and CO2. |
|
| Output |
Digital | RS232C |
| Analog (option) | DC 0 to 1V |
|
| Power Supply | Power Supply | AAA Battery x 4 (Mn, Alkaline, or Ni-Cd) |
| Dimensions |
Unit | 3.5" x 7.5" x 2.0" |
| Probe | Length: 12.5 inch / Diameter: 1.0 inch |
|
| Weight (including batteries) | Weight (including batteries) | Approx. 1.2 lbs (500g) |
