Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

4012 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

4012 COMMENTAIRES

JB Industries DV-200N-250SP PLATINUM® Spark-Proof Vacuum Pump 7 CFM with dual voltage motor and 1qt oil

Modèle: DV-200N-250SP

JB Industries DV-200N-250SP PLATINUM® Spark-Proof Vacuum Pump 7 CFM with dual voltage motor and 1qt oil-

Télécharger: manuel

Plus de produits JB Industries

Demander à un expert

JB Industries DV-200N-250SP PLATINUM® Spark-Proof Vacuum Pump 7 CFM with dual voltage motor and 1qt oil

Modèle: DV-200N-250SP

Spark-proof, dual voltage motor with switch and removable, interchangeable power cord for use on A1, A2L, A2 and A3 refrigeration systems.

Spark-proof, dual voltage motor with switch and removable, interchangeable power cord for use on A1, A2L, A2 and A3 refrigeration systems.

Prix spécial $1725.20 CAD
Prix régulier $1816.00 CAD
Disponibilité 1 en inventaire
Quantité

Accessoires recommandées

JB Industries PR-208 Flexible Coupler, 2-1/2"-

JB Industries PR-208 Flexible Coupler, 2-1/2"

PR-208

JB Industries PR-18 Cartridge Repair Kit-

JB Industries PR-18 Cartridge Repair Kit

PR-18

JB Industries PR-207 ½ HP Cycle Motor with switch and line cord, 115/230 V, 50/60 Hz-

JB Industries PR-207 ½ HP Cycle Motor with switch and line cord, 115/230 V, 50/60 Hz

PR-207

JB Industries PR-31 Line Cord for Emerson motor, 6'-

JB Industries PR-31 Line Cord for Emerson motor, 6'

PR-31

JB Industries PR-22 Oil Fill Plug-

JB Industries PR-22 Oil Fill Plug

PR-22

JB Industries PR-206 ½ HP Motor Complete with switch and line cord, 115 V, 60 Hz-

JB Industries PR-206 ½ HP Motor Complete with switch and line cord, 115 V, 60 Hz

PR-206

JB Industries DV-200N-250SP offre

Caractéristiques

  • 2-Stage direct drive with ½ HP capacitor start and thermal overload protection
  • Easy access ¼" (0.64 cm), ⅜" (0.95 cm) or ½" (1.27 cm) intake tee
  • 15 micron vacuum rating
  • Gas ballast and blank-off isolation valve
  • All metal construction with finned aluminum heavy-duty housing, brass fittings, stainless steel valving and splash guard
  • Ergonomic ½" (1.27 cm) NPT break-resistant exhaust handle with lift ring
  • Large, easy-to-see oil level sight glass with easy access oil fill on cover
  • O-ring sealed oil drain valve to prevent leaks and tethered safety cap to prevent oil spills
  • Internal check valve prevents oil backflow during power failure
  • 100% field repairable
  • International dual voltage pump

Spécifications pour le JB Industries DV-200N-250SP

Quantity Per Pack 1 pack
CFM 7
Motor ½ HP, 1725 RPM
Intake Port ½" (1.27 cm) x ¼" (0.64 cm) x ⅜" (0.95 cm)
Oil Capacity 21 oz (595.34 g)
Dimensions 14 x 18 x 9.13" (35.56 x 45.72 x 23.19 cm)
Weight 33 lbs (15 kg)

Le JB Industries DV-200N-250SP comprend

  • 7 CFM Spark-Proof Vacuum Pump
  • Vacuum Pump Oil - Quart
manuel pour le JB Industries DV-200N-250SP PLATINUM® Spark-Proof Vacuum Pump 7 CFM with dual voltage motor and 1qt oil

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le JB Industries DV-200N-250SP PLATINUM® Spark-Proof Vacuum Pump 7 CFM with dual voltage motor and 1qt oil.

JB Industries PR-208 Flexible Coupler, 2-1/2" PR-208
Flexible coupler 2-1/2" (3.81 cm) for DV-42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-3E, DV-4E and DV-6E.



JB Industries PR-59 Motor Mount Foot PR-59
Base foot for DV-42N, DV-85N, DV-142N, DV-200N, DV-285, DV-3E, DV-4E, and DV-6E.



JB Industries PR-500 Cushion and Cap, ⅜" NPT PR-500
Handle cushion and cap for ⅜" (0.95 cm) NPT for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N manufactured prior to 2008.



JB Industries PR-32 Intake with cap, ¼" PR-32
¼" (0.64 cm) intake with cap for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled prior to January 2001.



JB Industries PR-501 Cushion and Cap, ½" NPT PR-501
Handle cushion and cap for ½" (1.27 cm) NPT for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N manufactured beginning 2008.



JB Industries PR-209 Plastic Isolation Valve Handle and Screw PR-209
Plastic isolation valve handle and screw. For DV-42N, DV-85N, DV-142N, DV-200N and DV-285N. Not interchangeable with PR-210.



JB Industries PR-4 Rubber Foot and Screw assembly PR-4
Rubber foot and screw for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled beginning January 2001. Also fits DV-3 and DV-5 built prior to January 2001.



JB Industries PR-40 Splash Guard and Screw PR-40
For DV-42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-4E, and DV-6E. For DV-3E models and DV-42N models manufactured before 2001 (use PR-39). Excludes 3 CFM before January 2001.



JB Industries PR-205 Cushioned Handle with lift loop PR-205
Cushioned handle ⅜" (0.95 cm) NPT for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled prior to 2008 and DV-3E, DV-4E, and DV-6E.



JB Industries PR-45 Repair Kit for pump PR-45
Pump repair kit for all PLATINUM® models. DV-85N thru DV-285N and -250.



JB Industries PR-215 Trap O-ring and Intake PR-215
Trap O-ring and intake for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled prior to January 2001.



JB Industries PR-315 Trap O-Ring and Intake PR-315
Trap O-ring and intake for PLATINUM® DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled beginning January 2001, and all ELIMINATOR models DV-3E, DV-4E, and DV-6E.



JB Industries PR-211 Trap O-ring and Gas Ballast PR-211
Trap O-ring and gas ballast for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled beginning January 2001.



JB Industries PR-18 Cartridge Repair Kit PR-18
Cartridge valve repair kit for all ELIMINATOR and PLATINUM® models including DV-285 manufactured beginning 2007. For all pumps and -250Os, excluding DV-285N and -250, DV-142 (6-digit serial number), and DV-200N (serial number before 0796).



JB Industries PR-311 Cover Seal PR-311
Cover seal for DV-42N, DV-85N, DV-142N, and DV-200N assembled beginning January 2001.



JB Industries PR-207 ½ HP Cycle Motor with switch and line cord, 115/230 V, 50/60 Hz PR-207
Dual voltage ½ HP 115/230 V, 50/60 Hz motor with line cord and switch. For DV-42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-3E, DV-4E and DV-6.



JB Industries PR-206 ½ HP Motor Complete with switch and line cord, 115 V, 60 Hz PR-206
½ HP 115 V, 60 Hz, motor with line cord and switch for DV-42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-3E, DV-4E and DV-6E.



JB Industries PR-31 Line Cord for Emerson motor, 6' PR-31
6' (1.83 m) line cord for Emerson motor for DV-42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-3E, DV-4E, and DV-6E.



JB Industries PR-2 Drain Valve PR-2
Drain valve for vacuum pumps DV-42N, DV-85N, DV-142N, DV-200N, DV285N, DV-3E, DV-4E, and DV-6E.



JB Industries PR-54 Rocker Style Switch for Emerson with wire leads PR-54
Rocker switch with wire leads for Emerson motor for DV-42N, DV-85N, DV-200N, DV-285N, DV-3E, DV-4E, and DV-6E since 2004.



JB Industries PR-22 Oil Fill Plug PR-22
Oil fill plug with O-ring for DV-42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-3E, DV-4E, and DV-6E.



JB Industries PR-3 Shaft Seal PR-3
Shaft seal for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled beginning January 2001, and all ELIMINATOR models DV-3E, DV-4E, and DV-6E. Also fits DV-3 and DV-5 built prior to January 2001.



JB Industries PR-56 Adapter Nut with nut O-ring PR-56
For all PLATINUM® pump models.



Poser une question sur le JB Industries DV-200N-250SP PLATINUM® Spark-Proof Vacuum Pump 7 CFM with dual voltage motor and 1qt oil

JB Industries DV-200N-250SP offre

Caractéristiques

  • 2-Stage direct drive with ½ HP capacitor start and thermal overload protection
  • Easy access ¼" (0.64 cm), ⅜" (0.95 cm) or ½" (1.27 cm) intake tee
  • 15 micron vacuum rating
  • Gas ballast and blank-off isolation valve
  • All metal construction with finned aluminum heavy-duty housing, brass fittings, stainless steel valving and splash guard
  • Ergonomic ½" (1.27 cm) NPT break-resistant exhaust handle with lift ring
  • Large, easy-to-see oil level sight glass with easy access oil fill on cover
  • O-ring sealed oil drain valve to prevent leaks and tethered safety cap to prevent oil spills
  • Internal check valve prevents oil backflow during power failure
  • 100% field repairable
  • International dual voltage pump
En savoir plus...

Spécifications pour le JB Industries DV-200N-250SP

Quantity Per Pack 1 pack
CFM 7
Motor ½ HP, 1725 RPM
Intake Port ½" (1.27 cm) x ¼" (0.64 cm) x ⅜" (0.95 cm)
Oil Capacity 21 oz (595.34 g)
Dimensions 14 x 18 x 9.13" (35.56 x 45.72 x 23.19 cm)
Weight 33 lbs (15 kg)

Le JB Industries DV-200N-250SP comprend

  • 7 CFM Spark-Proof Vacuum Pump
  • Vacuum Pump Oil - Quart
manuel pour le JB Industries DV-200N-250SP PLATINUM® Spark-Proof Vacuum Pump 7 CFM with dual voltage motor and 1qt oil

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le JB Industries DV-200N-250SP PLATINUM® Spark-Proof Vacuum Pump 7 CFM with dual voltage motor and 1qt oil.

JB Industries PR-208 Flexible Coupler, 2-1/2" PR-208
Flexible coupler 2-1/2" (3.81 cm) for DV-42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-3E, DV-4E and DV-6E.



JB Industries PR-59 Motor Mount Foot PR-59
Base foot for DV-42N, DV-85N, DV-142N, DV-200N, DV-285, DV-3E, DV-4E, and DV-6E.



JB Industries PR-500 Cushion and Cap, ⅜" NPT PR-500
Handle cushion and cap for ⅜" (0.95 cm) NPT for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N manufactured prior to 2008.



JB Industries PR-32 Intake with cap, ¼" PR-32
¼" (0.64 cm) intake with cap for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled prior to January 2001.



JB Industries PR-501 Cushion and Cap, ½" NPT PR-501
Handle cushion and cap for ½" (1.27 cm) NPT for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N manufactured beginning 2008.



JB Industries PR-209 Plastic Isolation Valve Handle and Screw PR-209
Plastic isolation valve handle and screw. For DV-42N, DV-85N, DV-142N, DV-200N and DV-285N. Not interchangeable with PR-210.



JB Industries PR-4 Rubber Foot and Screw assembly PR-4
Rubber foot and screw for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled beginning January 2001. Also fits DV-3 and DV-5 built prior to January 2001.



JB Industries PR-40 Splash Guard and Screw PR-40
For DV-42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-4E, and DV-6E. For DV-3E models and DV-42N models manufactured before 2001 (use PR-39). Excludes 3 CFM before January 2001.



JB Industries PR-205 Cushioned Handle with lift loop PR-205
Cushioned handle ⅜" (0.95 cm) NPT for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled prior to 2008 and DV-3E, DV-4E, and DV-6E.



JB Industries PR-45 Repair Kit for pump PR-45
Pump repair kit for all PLATINUM® models. DV-85N thru DV-285N and -250.



JB Industries PR-215 Trap O-ring and Intake PR-215
Trap O-ring and intake for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled prior to January 2001.



JB Industries PR-315 Trap O-Ring and Intake PR-315
Trap O-ring and intake for PLATINUM® DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled beginning January 2001, and all ELIMINATOR models DV-3E, DV-4E, and DV-6E.



JB Industries PR-211 Trap O-ring and Gas Ballast PR-211
Trap O-ring and gas ballast for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled beginning January 2001.



JB Industries PR-18 Cartridge Repair Kit PR-18
Cartridge valve repair kit for all ELIMINATOR and PLATINUM® models including DV-285 manufactured beginning 2007. For all pumps and -250Os, excluding DV-285N and -250, DV-142 (6-digit serial number), and DV-200N (serial number before 0796).



JB Industries PR-311 Cover Seal PR-311
Cover seal for DV-42N, DV-85N, DV-142N, and DV-200N assembled beginning January 2001.



JB Industries PR-207 ½ HP Cycle Motor with switch and line cord, 115/230 V, 50/60 Hz PR-207
Dual voltage ½ HP 115/230 V, 50/60 Hz motor with line cord and switch. For DV-42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-3E, DV-4E and DV-6.



JB Industries PR-206 ½ HP Motor Complete with switch and line cord, 115 V, 60 Hz PR-206
½ HP 115 V, 60 Hz, motor with line cord and switch for DV-42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-3E, DV-4E and DV-6E.



JB Industries PR-31 Line Cord for Emerson motor, 6' PR-31
6' (1.83 m) line cord for Emerson motor for DV-42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-3E, DV-4E, and DV-6E.



JB Industries PR-2 Drain Valve PR-2
Drain valve for vacuum pumps DV-42N, DV-85N, DV-142N, DV-200N, DV285N, DV-3E, DV-4E, and DV-6E.



JB Industries PR-54 Rocker Style Switch for Emerson with wire leads PR-54
Rocker switch with wire leads for Emerson motor for DV-42N, DV-85N, DV-200N, DV-285N, DV-3E, DV-4E, and DV-6E since 2004.



JB Industries PR-22 Oil Fill Plug PR-22
Oil fill plug with O-ring for DV-42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-3E, DV-4E, and DV-6E.



JB Industries PR-3 Shaft Seal PR-3
Shaft seal for DV-42N, DV-85N, DV-142N, DV-200N, and DV-285N assembled beginning January 2001, and all ELIMINATOR models DV-3E, DV-4E, and DV-6E. Also fits DV-3 and DV-5 built prior to January 2001.



JB Industries PR-56 Adapter Nut with nut O-ring PR-56
For all PLATINUM® pump models.



Poser une question sur le JB Industries DV-200N-250SP PLATINUM® Spark-Proof Vacuum Pump 7 CFM with dual voltage motor and 1qt oil

Plus de produits JB Industries



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.