OVP, OCP, OTP, and, output On/Off control protect the PSM-Series and their load from unexpected conditions. High resolution, high regulation, and low ripple are maintained at 1mV/1mA, 0.01%, and <350 Vrms, respectively.
OVP, OCP, OTP, and, output On/Off control protect the PSM-Series and their load from unexpected conditions. High resolution, high regulation, and low ripple are maintained at 1mV/1mA, 0.01%, and <350 Vrms, respectively.
The Instek PSM-6003 DC Power Supply has auto step running with timer setting and 100 sets of memory.
Features
| DC Output | |
| Low Range | 0 to 30V/6A |
| High Range | 0 to 60V/3.3A |
| Constant Voltage Operation | |
| Regulation + (% of output + offset) | Load Regulation: ≤0.01% + 2mV Line Regulation: ≤0.01% + 2mV |
| Ripple & Noise | ≤50V: <500 μVrms/3mVpp >50V: <1 mVrms/3mVpp |
| Constant Current Operation | |
| Regulation + (% of output + offset) | Load Regulation: ≤0.01% + 250μA Line Regulation: ≤0.01% + 250μA |
| Ripple & Noise | <2mArms |
| Resolution | |
| Programming Voltage | 2mV |
| Programming Current | 0.5mA |
| Readback Voltage | 1mV |
| Readback Current | 0.5mA |
| Front Panel Voltage | 1mV |
| Front Panel Current | 1mA (<10A), 10mA (>10A) |
| OVP/OCP Voltage | 10mV |
| OVP/OCP Current | 10mA |
| Accuracy | |
| Programming Voltage | 0.05% + 10mV |
| Programming Current | 0.2% + 10mA |
| Readback Voltage | 0.05% + 5mV |
| Readback Current | 0.15% + 5mA |
| OVP/OCP Voltage | 0.1% + 10mV |
| OVP/OCP Current | 0.4% + 10mA |
| General Specifications | |
| Transient Response | <50μsec (for output to recover within 15mV following a change in output current from full load to half load) |
| Command Processing Time | 100ms |
| Voltage Programming Response Time (For Resistive Load) | Voltage Up Full Load: 80mS Voltage Up No Load: 100mS Voltage Down Full Load: 30mS Voltage Down No Load: 450mS |
| Stability (% of Output + Offset) | Voltage: 0.02% + 1mV Current: 0.1% + 1mA |
| Memory | Store/Recall 100 Sets |
| Temperature Coefficient Per ±(% of Output + Offset) | Voltage: 0.01% + 3mV Current: 0.02% + 3mA |
| Interface | Standard: RS-232C, GPIB |
| Power Source | AC100V/120V/220V±10%, 230V-6%~+10%, 50/60Hz |
| Dimensions | 230 x 140 x 380 mm |
| Weight | Approx. 10kg |
| DC Output | |
| Low Range | 0 to 30V/6A |
| High Range | 0 to 60V/3.3A |
| Constant Voltage Operation | |
| Regulation + (% of output + offset) | Load Regulation: ≤0.01% + 2mV Line Regulation: ≤0.01% + 2mV |
| Ripple & Noise | ≤50V: <500 μVrms/3mVpp >50V: <1 mVrms/3mVpp |
| Constant Current Operation | |
| Regulation + (% of output + offset) | Load Regulation: ≤0.01% + 250μA Line Regulation: ≤0.01% + 250μA |
| Ripple & Noise | <2mArms |
| Resolution | |
| Programming Voltage | 2mV |
| Programming Current | 0.5mA |
| Readback Voltage | 1mV |
| Readback Current | 0.5mA |
| Front Panel Voltage | 1mV |
| Front Panel Current | 1mA (<10A), 10mA (>10A) |
| OVP/OCP Voltage | 10mV |
| OVP/OCP Current | 10mA |
| Accuracy | |
| Programming Voltage | 0.05% + 10mV |
| Programming Current | 0.2% + 10mA |
| Readback Voltage | 0.05% + 5mV |
| Readback Current | 0.15% + 5mA |
| OVP/OCP Voltage | 0.1% + 10mV |
| OVP/OCP Current | 0.4% + 10mA |
| General Specifications | |
| Transient Response | <50μsec (for output to recover within 15mV following a change in output current from full load to half load) |
| Command Processing Time | 100ms |
| Voltage Programming Response Time (For Resistive Load) | Voltage Up Full Load: 80mS Voltage Up No Load: 100mS Voltage Down Full Load: 30mS Voltage Down No Load: 450mS |
| Stability (% of Output + Offset) | Voltage: 0.02% + 1mV Current: 0.1% + 1mA |
| Memory | Store/Recall 100 Sets |
| Temperature Coefficient Per ±(% of Output + Offset) | Voltage: 0.01% + 3mV Current: 0.02% + 3mA |
| Interface | Standard: RS-232C, GPIB |
| Power Source | AC100V/120V/220V±10%, 230V-6%~+10%, 50/60Hz |
| Dimensions | 230 x 140 x 380 mm |
| Weight | Approx. 10kg |
