The two channel oscilloscope has a pre-trigger function and waveform save/recall. With equivalent time sampling at 500MSa/s, it's capable of reconstructing repetitive waveforms up to 30MHz in an accurate and detailed fashion.
The two channel oscilloscope has a pre-trigger function and waveform save/recall. With equivalent time sampling at 500MSa/s, it's capable of reconstructing repetitive waveforms up to 30MHz in an accurate and detailed fashion.
Discontinué!
Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :
The two channel Instek GRS-6032A Analog/Digital Storage Oscilloscope has a pre-trigger function and waveform save/recall.
Caractéristiques
| Vertical System | |
| Deflection Coefficient and Accuracy | 1mV to 2mV/div 5% 5mV to 20V/div 3% 14 Steps in 1-2-5 Sequence |
| Variable Continuously | 2.5 : 1 ~ min. 50V/div |
| Bandwidth | (-3dB) 1mV ~ 20mV/div: DC~7MHz 5mV ~ 20V/div: DC~30MHz |
| Vertical Mode | CH1, CH2, DUAL (ALT or CHOP) |
| Chopper Frequency | Approx. 250kHz |
| Sum or Difference | CH1+CH2, CH1-CH2 |
| Invert | CH2 |
| Input Impedance | 1M 2% Approx. 25pF |
| Input Coupling | AC, DC, GND |
| Input Voltage | Max. 400V(DC+ACpk) |
| General Specifications | |
| CH1 Signal Output Voltage | Approx. 20mV/ (with 50 Terminated) Bandwidth: 50Hz to 5MHz |
| Calibrator Output Voltage | 0.5V 3% Frequency: Approx. 1kHz, Square Wave |
| Interface | RS-232C |
| Power Source | AC 100V/120V/230V 10%, 50/60Hz |
| Dimensions | 275 x 130 x 370 mm |
| Weight | Approx. 8.5kg |
| Vertical System | |
| Deflection Coefficient and Accuracy | 1mV to 2mV/div 5% 5mV to 20V/div 3% 14 Steps in 1-2-5 Sequence |
| Variable Continuously | 2.5 : 1 ~ min. 50V/div |
| Bandwidth | (-3dB) 1mV ~ 20mV/div: DC~7MHz 5mV ~ 20V/div: DC~30MHz |
| Vertical Mode | CH1, CH2, DUAL (ALT or CHOP) |
| Chopper Frequency | Approx. 250kHz |
| Sum or Difference | CH1+CH2, CH1-CH2 |
| Invert | CH2 |
| Input Impedance | 1M 2% Approx. 25pF |
| Input Coupling | AC, DC, GND |
| Input Voltage | Max. 400V(DC+ACpk) |
| General Specifications | |
| CH1 Signal Output Voltage | Approx. 20mV/ (with 50 Terminated) Bandwidth: 50Hz to 5MHz |
| Calibrator Output Voltage | 0.5V 3% Frequency: Approx. 1kHz, Square Wave |
| Interface | RS-232C |
| Power Source | AC 100V/120V/230V 10%, 50/60Hz |
| Dimensions | 275 x 130 x 370 mm |
| Weight | Approx. 8.5kg |
