Ideal for measurements in confined or difficult to reach locations. All standard DPU sensors come with a six foot cable and measure both compression and tension.
Ideal for measurements in confined or difficult to reach locations. All standard DPU sensors come with a six foot cable and measure both compression and tension.
Discontinué!
Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :
Easy-to-use menus make programming simple in eight languages. Select units, reverse display, set high/low setpoints, and all other functions in plain language.
ZT Logger data acquisition software downloads data from the gauge memory or captures a continuous stream of data at 10 data/second. Zero the gauge or capture data while at the computer. All gauge programming can be set and saved from the software.
Caractéristiques
| Capacity (Resolution) | |
| Pounds | 1100 (1 lbf) |
| Kilograms | 500.00 (0.1 kgf) |
| Newtons | 5000 (1 N) |
| Sensor Specifications | |
| Shape | "S" Type |
| Dimensions | 2.00 x 1.11 x 3.00 x 1/2-20UNF-2B |
| General Specifications | |
| Accuracy | ±0.2% FS, ±1 LSD |
| Selectable Units | lbf (ozf), kgf (gf) or Newtons |
| Overload Capacity | 200% of F.S. (Overload indicator flashes beyond 110% of F.S.) |
| Power Supply | Rechargeable Ni-MH battery pack or AC adapter |
| Battery Indicator | Indicates three charge states high, med and low |
| Memory | Non-volatile, recall up to 1,000 data |
| Setpoints | Programmable high/low setpoints w/ color-coded LEDs & output signal |
| Outputs | Outputs USB (virtual COM port), RS-232C, Digimatic and ±2 VDC analog output |
| Operating Temperature | 32 to 100°F (0 to 40°C) |
| Capacity (Resolution) | |
| Pounds | 1100 (1 lbf) |
| Kilograms | 500.00 (0.1 kgf) |
| Newtons | 5000 (1 N) |
| Sensor Specifications | |
| Shape | "S" Type |
| Dimensions | 2.00 x 1.11 x 3.00 x 1/2-20UNF-2B |
| General Specifications | |
| Accuracy | ±0.2% FS, ±1 LSD |
| Selectable Units | lbf (ozf), kgf (gf) or Newtons |
| Overload Capacity | 200% of F.S. (Overload indicator flashes beyond 110% of F.S.) |
| Power Supply | Rechargeable Ni-MH battery pack or AC adapter |
| Battery Indicator | Indicates three charge states high, med and low |
| Memory | Non-volatile, recall up to 1,000 data |
| Setpoints | Programmable high/low setpoints w/ color-coded LEDs & output signal |
| Outputs | Outputs USB (virtual COM port), RS-232C, Digimatic and ±2 VDC analog output |
| Operating Temperature | 32 to 100°F (0 to 40°C) |
