This vector force gauge with a 44lbF and 20kgF capacity features a tilt sensor, which alerts users to deviation from the reference angle with 3 levels of sensitivity. You can easily select units, measuring modes and recall data thanks to the large backlit LCD and user-friendly menus.
This vector force gauge with a 44lbF and 20kgF capacity features a tilt sensor, which alerts users to deviation from the reference angle with 3 levels of sensitivity. You can easily select units, measuring modes and recall data thanks to the large backlit LCD and user-friendly menus.
Imada DSV vector force gauges with tilt sensors help users performing handheld measurements to push or pull at a consistent angle, improving measurement accuracy. The tilt alarm has 3 degrees of sensitivity - 4°, 8° or 18° from the reference angle. The large backlit LCD display and user-friendly menus simplify the selection of units, measuring mode and recalling data and statistics from the 1,000 data internal memory. Selections can be locked to prevent accidental changes. The gauges have an ultra-high 30,000/second sampling rate to capture peak destructive force values. Collect the data via USB or RS-232 connections with the optional Force Logger or SW-1X software.
Features
| Tilt Alarm | OFF, Strict (4°), Normal (8°) or Loose (18°) |
| Accuracy | ±0.2% F.S., ±1 LSD |
| Selectable Units | lbF (ozF), kgF (gF) or Newtons |
| Display | 4-digit backlit LCD |
| Overload Capacity | Approx. 200% of F.S. |
| Overload Alarm | Audible alarm at 90% of capacity;
Audible alarm and indicator flashes beyond 110% of F.S. |
| Sampling Rate | 30,000/second |
| Internal Memory | 1,000 data with statistics |
| Battery Life | Approx. 30 hours backlight off
Approx. 14 hours backlight on 4.5 hours required for full charge |
| Battery Indicator | Battery icon displays 3 levels of charge |
| Setpoints | Programmable high/low setpoints with OK indicator |
| Outputs | USB, RS-232C |
| Operating Temp. | 32° to 100°F (0° to 40°C) |
| Tilt Alarm | OFF, Strict (4°), Normal (8°) or Loose (18°) |
| Accuracy | ±0.2% F.S., ±1 LSD |
| Selectable Units | lbF (ozF), kgF (gF) or Newtons |
| Display | 4-digit backlit LCD |
| Overload Capacity | Approx. 200% of F.S. |
| Overload Alarm | Audible alarm at 90% of capacity;
Audible alarm and indicator flashes beyond 110% of F.S. |
| Sampling Rate | 30,000/second |
| Internal Memory | 1,000 data with statistics |
| Battery Life | Approx. 30 hours backlight off
Approx. 14 hours backlight on 4.5 hours required for full charge |
| Battery Indicator | Battery icon displays 3 levels of charge |
| Setpoints | Programmable high/low setpoints with OK indicator |
| Outputs | USB, RS-232C |
| Operating Temp. | 32° to 100°F (0° to 40°C) |
