Use this current sensor with your compatible display unit to measure up to 600A AC/DC signals. The clamp-on design allows simple attachment.
Use this current sensor with your compatible display unit to measure up to 600A AC/DC signals. The clamp-on design allows simple attachment.
When you attach this Hioki CT7636 Clamp-On AC/DC Current Sensor to your wires, you'll be able to measure AC/DC current up to 600A in a DC to 10kHz bandwidth. The sensor is ideal for use in temperature-controlled environments.
Features
| Rated Measurement Current | 600A AC/DC |
| Maximum Measurement Current | 600A (requires derating at frequency) |
| Maximum Allowable Peak Input | 900A |
| Bandwidth | DC to 10kHz (-3dB) |
| Accuracy | ±1.8° (typical) |
| Output Rate | 1mV/A |
| Maximum Rated Voltage to Earth | 600V AC/DC (Cat IV), 1,000V AC/DC (Cat III) |
| Core Diameter | φ1.3in (33mm) |
| Connection | Hioki PL 14 (output) |
| Operating Temperature | -13 to 149°F (-25 to 65°C) |
| CE Compliant | Yes |
| Product Length | 1.34in (34mm) main unit, 8.2ft (2.5m) cable |
| Product Width | 2.52in (64mm) |
| Product Height | 6.3in (160mm) |
| Product Weight | 11.3oz (320g) |
| Rated Measurement Current | 600A AC/DC |
| Maximum Measurement Current | 600A (requires derating at frequency) |
| Maximum Allowable Peak Input | 900A |
| Bandwidth | DC to 10kHz (-3dB) |
| Accuracy | ±1.8° (typical) |
| Output Rate | 1mV/A |
| Maximum Rated Voltage to Earth | 600V AC/DC (Cat IV), 1,000V AC/DC (Cat III) |
| Core Diameter | φ1.3in (33mm) |
| Connection | Hioki PL 14 (output) |
| Operating Temperature | -13 to 149°F (-25 to 65°C) |
| CE Compliant | Yes |
| Product Length | 1.34in (34mm) main unit, 8.2ft (2.5m) cable |
| Product Width | 2.52in (64mm) |
| Product Height | 6.3in (160mm) |
| Product Weight | 11.3oz (320g) |
