Use this sensor to collect accurate current measurements. It comes with 6 mark bands, an instruction manual and operating precautions.
Use this sensor to collect accurate current measurements. It comes with 6 mark bands, an instruction manual and operating precautions.
When you need reliable signal capture, use the Hioki CT6875 AC/DC Current Sensor. It is ideal for use with oscilloscopes, power meters and more. Plus, this sensor was designed with enhanced environmental resistance, able to properly function in a wide range of temperatures and target current amid extraneous noise.
Caractéristiques
Applications
| Rated Current | 500 A AC/DC |
| Maximum Allowable Input | Up to ±1,500 Apeak (design value) allowed at 104°F (40°C) or less for 20 ms or less |
| Frequency Bandwidth | Amplitude: DC to 2 MHz; phase: DC to 1 MHz |
| Output Voltage Rate | 4 mV/A rated |
| Maximum Rated Voltage to Earth | 1,000 V AC/DC (50/60 Hz, CAT III) |
| Maximum Rated Power | 7 VA maximum at 500 A/55 Hz |
| Operating Temperature | -40 to 185°F (-40 to 85°C), 80% RH or less (noncondensing) |
| Compatibility | Hioki PW6001/PW3390/3390 Power Analyzers, HiTester 3193 and Current Unit 8971 (connector cables may be required for use with these devices) |
| Power Supply | Power Analyzer PW6001, PW3390 or Sensor Unit CT9555, CT9556, CT9557 |
| Compliance | CE |
| Product Length | 1.97" (50 mm) depth; 9.84' (3 m) cable |
| Product Width | 6.3" (160 mm) |
| Product Height | 4.41" (112 mm) |
| Product Weight | 28.2 oz (800 g) |
| Manufacturer Warranty | 3 years |
| Rated Current | 500 A AC/DC |
| Maximum Allowable Input | Up to ±1,500 Apeak (design value) allowed at 104°F (40°C) or less for 20 ms or less |
| Frequency Bandwidth | Amplitude: DC to 2 MHz; phase: DC to 1 MHz |
| Output Voltage Rate | 4 mV/A rated |
| Maximum Rated Voltage to Earth | 1,000 V AC/DC (50/60 Hz, CAT III) |
| Maximum Rated Power | 7 VA maximum at 500 A/55 Hz |
| Operating Temperature | -40 to 185°F (-40 to 85°C), 80% RH or less (noncondensing) |
| Compatibility | Hioki PW6001/PW3390/3390 Power Analyzers, HiTester 3193 and Current Unit 8971 (connector cables may be required for use with these devices) |
| Power Supply | Power Analyzer PW6001, PW3390 or Sensor Unit CT9555, CT9556, CT9557 |
| Compliance | CE |
| Product Length | 1.97" (50 mm) depth; 9.84' (3 m) cable |
| Product Width | 6.3" (160 mm) |
| Product Height | 4.41" (112 mm) |
| Product Weight | 28.2 oz (800 g) |
| Manufacturer Warranty | 3 years |
