Use this clamp-on sensor to measure leak current in your devices. The sensor is capable of analyzing up to 10A AC.
Use this clamp-on sensor to measure leak current in your devices. The sensor is capable of analyzing up to 10A AC.
When you connect this Hioki 9657-10 Clamp-On Leak Sensor to your compatible Hioki model (sold separately), you'll be able to measure leak current up to 10A AC. The sensor can even measure very weak current with its permeable magnetic core and magnetic shield.
Caractéristiques
| Rated Primary Current | 10A AC |
| Maximum Allowable Input | 30A (continuous) |
| Rated Output Current | 100mV/A AC |
| Amplitude Accuracy | ±1% of reading, ±0.05% of full scale (45 to 66Hz) |
| Phase Accuracy | ±3° (at 50 or 60Hz) |
| Frequency | ±3% (40Hz to 5kHz ) |
| Maximum Rated Voltage to Earth | 300Vrms AC (insulated conductor, Cat III) |
| Core Diameter | φ1.57in (40mm) |
| CE Compliant | Yes |
| Product Length | 1.65in (42mm) main unit, 9.84ft (3m) cord |
| Product Width | 2.91in (74mm) |
| Product Height | 5.71in (145mm) |
| Product Weight | 13.4oz (380g) |
| Rated Primary Current | 10A AC |
| Maximum Allowable Input | 30A (continuous) |
| Rated Output Current | 100mV/A AC |
| Amplitude Accuracy | ±1% of reading, ±0.05% of full scale (45 to 66Hz) |
| Phase Accuracy | ±3° (at 50 or 60Hz) |
| Frequency | ±3% (40Hz to 5kHz ) |
| Maximum Rated Voltage to Earth | 300Vrms AC (insulated conductor, Cat III) |
| Core Diameter | φ1.57in (40mm) |
| CE Compliant | Yes |
| Product Length | 1.65in (42mm) main unit, 9.84ft (3m) cord |
| Product Width | 2.91in (74mm) |
| Product Height | 5.71in (145mm) |
| Product Weight | 13.4oz (380g) |
