The probe is ideal for measuring the current of low impedance circuits and waveforms, including high-frequency components. It's high S/N characteristics allow for the measurement of 10 mA order current waveforms.
The probe is ideal for measuring the current of low impedance circuits and waveforms, including high-frequency components. It's high S/N characteristics allow for the measurement of 10 mA order current waveforms.
The clamp on probe connects directly to oscilloscope or Memory HiCorder BNC input terminal. The probe is designed with a high permeability magnetic shield with low insertion loss to reduce derating that may result from increased sensor head heating caused by eddy currents, making it ideal for measuring current of low impedance circuits and waveforms that include high frequency components.
Features
| Frequency Bandwidth | DC to 100 MHz (-3 dB) |
| Rise Time | Open-circuit voltage |
| Noise Level | 2.5 mA rms max (bandwidth limited to 20 MHz) |
| Continuous Allowable Input | 30 A rms (requires derating at frequency) |
| Max. Allowable Peak Input | 50 A peak (non continuous) |
| Amplitude Accuracy (30 min. after power-on, after degaussing and zero-adjustment) | ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 30 A rms) ±2 % rdg. (DC, 45 to 66 Hz, 30 A rms to 50 A peak) |
| Output Rate | 0.1 V/A (The output of this probe is internally terminated, so connect to voltage input equipment with high input impedance such as 1 MΩ) |
| Measurable Conductors | Insulated conductor |
| Core Diameter | φ 0.20" (5 mm) |
| Power Supply | ±12 V ±0.5 V, 5.3 VA max |
| Dimensions | 6.89 x 0.71 x 1.57" (175 x 18 x 40 mm) Sensor cable BNC terminal: 4.92' (1.5 m), Power cable: 3.28' (1 m) |
| Weight | 240g (8.5oz) |
| Frequency Bandwidth | DC to 100 MHz (-3 dB) |
| Rise Time | Open-circuit voltage |
| Noise Level | 2.5 mA rms max (bandwidth limited to 20 MHz) |
| Continuous Allowable Input | 30 A rms (requires derating at frequency) |
| Max. Allowable Peak Input | 50 A peak (non continuous) |
| Amplitude Accuracy (30 min. after power-on, after degaussing and zero-adjustment) | ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 30 A rms) ±2 % rdg. (DC, 45 to 66 Hz, 30 A rms to 50 A peak) |
| Output Rate | 0.1 V/A (The output of this probe is internally terminated, so connect to voltage input equipment with high input impedance such as 1 MΩ) |
| Measurable Conductors | Insulated conductor |
| Core Diameter | φ 0.20" (5 mm) |
| Power Supply | ±12 V ±0.5 V, 5.3 VA max |
| Dimensions | 6.89 x 0.71 x 1.57" (175 x 18 x 40 mm) Sensor cable BNC terminal: 4.92' (1.5 m), Power cable: 3.28' (1 m) |
| Weight | 240g (8.5oz) |
