The EZ-View series flow meter is a rugged, low-cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.
The EZ-View series flow meter is a rugged, low-cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.
Caractéristiques
| Débitmètres d'air | |
| Précision | ±2% F.S. |
| Répétabilité | ±1% F.S. |
| Pression | 600 psi max. |
| Température | 240°F maximum. (180°F max. pour la série 1/2" NPT) |
| Échelles | Étalonné en SCFM à une pression de 40 à 130 psi & température de 70°C |
| Matériau | Aluminium anodisé |
| Débitmètres de liquide | |
| Précision | ±2% F.S. |
| Répétabilité | ±1% F.S. |
| Pression | 3000 psi max. (800 psi max. pour la série 3" NPT) |
| Température | 240°F maximum. (180°F max. pour la série 1/2" NPT) |
| Échelles | Étalonné en GPM & LPM à 0.876 Sp. Gr. (huile) & à 1.0 Sp. Gr. (eau) à 70°F Les modèles 1/4" NPT sont fournis avec l'échelle GPM uniquement. LPM disponible. |
| Matériau | Aluminium pour pétrole & fluides à base d'eau Laiton pour modèles à eau sans vapeur |
| Débitmètres d'air | |
| Précision | ±2% F.S. |
| Répétabilité | ±1% F.S. |
| Pression | 600 psi max. |
| Température | 240°F maximum. (180°F max. pour la série 1/2" NPT) |
| Échelles | Étalonné en SCFM à une pression de 40 à 130 psi & température de 70°C |
| Matériau | Aluminium anodisé |
| Débitmètres de liquide | |
| Précision | ±2% F.S. |
| Répétabilité | ±1% F.S. |
| Pression | 3000 psi max. (800 psi max. pour la série 3" NPT) |
| Température | 240°F maximum. (180°F max. pour la série 1/2" NPT) |
| Échelles | Étalonné en GPM & LPM à 0.876 Sp. Gr. (huile) & à 1.0 Sp. Gr. (eau) à 70°F Les modèles 1/4" NPT sont fournis avec l'échelle GPM uniquement. LPM disponible. |
| Matériau | Aluminium pour pétrole & fluides à base d'eau Laiton pour modèles à eau sans vapeur |