This is a 3-in-1 pre-amplified multiparameter probe that measures pH, EC/TDS, and temperature within a single polypropylene body.
This is a 3-in-1 pre-amplified multiparameter probe that measures pH, EC/TDS, and temperature within a single polypropylene body.
The pH portion of this probe is constructed with a cloth junction, maintenance free polymer gel electrolyte, and a low temperature glass sensing bulb. The EC/TDS portion of this probe utilizes two graphite sensors for an amperometric determination of conductivity and total dissolved solids. A built-in temperature sensor ensures that both pH and EC/TDS readings are compensated for temperature variations in both standards and samples. Designed for use with the HI991300 and HI991301 portable multiparameter meters.
Features
Applications
| Range | -50.0 to 220°C |
| Resolution | 0.1°C (-50.0 to 199.9°C); 1°C (200 to 220°C) |
| Accuracy | -20.0 to 90.0°C: ±0.3°C ±1 digit Outside: ±1% FS ±1 digit |
| CAL Check™ | Automatic, at Start-up |
| Probe | Stainless Steel with Penetration Tip 4.6 x 0.14" (117 x 3.5mm) |
| Battery Life | Approx. 25,000 hours of continuous use |
| Power Supply | 1.5V AA Battery |
| Auto-Off | After 8 minutes of non-use |
| Weight | 100g (3.5 oz) |
| Dimensions | 6.5 x 2.0 x 0.8" (165 x 50 x 20mm) |
| Range | -50.0 to 220°C |
| Resolution | 0.1°C (-50.0 to 199.9°C); 1°C (200 to 220°C) |
| Accuracy | -20.0 to 90.0°C: ±0.3°C ±1 digit Outside: ±1% FS ±1 digit |
| CAL Check™ | Automatic, at Start-up |
| Probe | Stainless Steel with Penetration Tip 4.6 x 0.14" (117 x 3.5mm) |
| Battery Life | Approx. 25,000 hours of continuous use |
| Power Supply | 1.5V AA Battery |
| Auto-Off | After 8 minutes of non-use |
| Weight | 100g (3.5 oz) |
| Dimensions | 6.5 x 2.0 x 0.8" (165 x 50 x 20mm) |
