Digital conductivity electrode with a built in temperature sensor and a potentiometric probe, with platinum sensors which allows for the possibility to measure high or low conductivity ranges using one probe.
Digital conductivity electrode with a built in temperature sensor and a potentiometric probe, with platinum sensors which allows for the possibility to measure high or low conductivity ranges using one probe.
Features
Built-in Microchip
The built-in microchip stores sensor type, serial number and calibration including date, time, offset, slope, probe condition and buffers used. The edge automatically retrieves the information once the electrode is plugged in.
Potentiometric Measuring System
The four ring potentiometric measuring system allows measurement of a broad range of samples while minimizing the effects of polarization.
Sleeve
The probe is surrounded by a chemically resistant plastic sleeve to maintain control external interferences from the sample. It allows the current loop to be generated in a controlled area.
Internal Temperature Sensor
Temperature is an important factor for measuring conductivity, a built-in temperature sensor on the probe is very helpful. There is no need for an external temperature probe, so that measurements can be made easily.
Body Material | PEI |
Type | 4-ring |
Insulator | glass |
Electrodes | Platinum |
Range | 0 to 200 mS/cm |
Body Length / Overall Length | 120mm |
Recommended Operating Temperature | -5 to 100°C (23 to 212°F) |
Temperature Sensor | yes |
Amplifier | no |
Other | Unique serial ID |
Digital | yes |
Compatible Meters | edge multiparameter |
Cable | 1 m (3.3') |
Body Material | PEI |
Type | 4-ring |
Insulator | glass |
Electrodes | Platinum |
Range | 0 to 200 mS/cm |
Body Length / Overall Length | 120mm |
Recommended Operating Temperature | -5 to 100°C (23 to 212°F) |
Temperature Sensor | yes |
Amplifier | no |
Other | Unique serial ID |
Digital | yes |
Compatible Meters | edge multiparameter |
Cable | 1 m (3.3') |