Cost effective stainless steel flowmeters for measuring the flow of water, fuels and other low viscosity liquids in pipes.
Cost effective stainless steel flowmeters for measuring the flow of water, fuels and other low viscosity liquids in pipes.
Discontinué!
Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :
DP490 & DP525 are cost effective stainless steel flowmeters for measuring the flow of water, fuels & other low viscosity liquids in pipes sizes 1.5"~100" (40~2500mm). Insertion flowmeters are installed with the metering head 1/8th into the pipe resulting in very little pressure drop. They do not require external power when used with the FLOMEC® rate totalizers, however some options such as high temperature & non-magnetic models require external power.
Caractéristiques
Applications
Ideal for the following applications: HVAC, Hot and Chilled Water, Fire Systems, Water Distribution Management and Treatment, Boiler Feed Water, Hydrant Testing.
| Size | 2 to 100 in. pipes ( 50-2500 mm ) suitable for "hot-tap" installations (valve not included) |
| Body Materials | Stainless Steel |
| Rotor and Bearing Materials | PVDF rotor with 316 stainless steel rotor shaft (standard) |
| O-Ring Materials | FKM (Viton™) standard, 5 to 400º F (-15 to +204º C) |
| Temperature Limits | 212º F (100º C) standard, ( 185º F [85º C] maximum for non magnetic output type 4 ) |
| Process Connections | NPT male thread - 1 1/2" |
| Pick-Up Type | Reed switch only (may be used with an I.S. barrier or instrument in hazardous areas) |
| Electrical Connections | Stem kit - 3/8" NPT (price included with integral options B2, B3, R2, R3 & E0) |
| Included Option | I.S. intrinsically safe RT12 with all outputs [IECEX & ATEX approved] |
| Size | 2 to 100 in. pipes ( 50-2500 mm ) suitable for "hot-tap" installations (valve not included) |
| Body Materials | Stainless Steel |
| Rotor and Bearing Materials | PVDF rotor with 316 stainless steel rotor shaft (standard) |
| O-Ring Materials | FKM (Viton™) standard, 5 to 400º F (-15 to +204º C) |
| Temperature Limits | 212º F (100º C) standard, ( 185º F [85º C] maximum for non magnetic output type 4 ) |
| Process Connections | NPT male thread - 1 1/2" |
| Pick-Up Type | Reed switch only (may be used with an I.S. barrier or instrument in hazardous areas) |
| Electrical Connections | Stem kit - 3/8" NPT (price included with integral options B2, B3, R2, R3 & E0) |
| Included Option | I.S. intrinsically safe RT12 with all outputs [IECEX & ATEX approved] |
