Check voltage, continuity, and current with the electrical tester. On the other hand, use the non-contact voltage detector to test for energized circuits and defective grounds. Additionally, this kit is ideal for electricians, maintenance, service, safety personnel, and homeowners.
Check voltage, continuity, and current with the electrical tester. On the other hand, use the non-contact voltage detector to test for energized circuits and defective grounds. Additionally, this kit is ideal for electricians, maintenance, service, safety personnel, and homeowners.
| Function Specifications | |
| Jaw Opening | 0.5" (12.9 mm) |
| Max Wire Size | 1/0 THHN Cable |
| Current Range AC RMS | 0 to 100.0 A |
| Accuracy AC Current (50/60 Hz) | 3% ± 3 counts |
| AC Response | Averaging |
| Voltage Range AC/DC | 0 to 1000 V |
| Voltage Accuracy | AC: 1.5% ± 2 counts DC: 1% ± 1 count |
| Resistance Range | 0 to 1000 Ω |
| Continuity Beeper Threshold | On at <25 Ω<br> Off at >400 Ω |
| Volts Indicator LED Threshold | Guaranteed on by 30 V AC |
| Environmental Specifications | |
| Operating Temperature | 14 to 122°F (-10 to 50°C) |
| Storage Temperature | -22 to 140°F (-30 to 60°C) |
| Humidity (Without Condensation) | 0 to 95% at 41 to 86°F (5 to 30°C) 0 to 75% at 86 to 104°F (30 to 40°C) 0 to 45% at 104 to 122°F (40 to 50°C) |
| Dust/Water Resistance | Yes |
| Operating Altitude | 6561.7' (2000 m) max |
| Temperature Coefficient | 0.1 x (specified accuracy)/°C (<18°C or >28°C) |
| Mechanical and General Specifications | |
| Battery Life | 200 hours zinc chloride 400 hours alkaline |
| Battery Type | 2 x AA Batteries |
| Low Battery Indicator | Yes |
| Current Sensor Opening | 0.5" (12.9 mm) |
| Dimensions | 1.2 x 2 x 8" (30.5 x 51 x 203 mm) |
| Weight | 0.7 lb (300 g) |
| Safety Specifications | |
| Measurement Category | IEC 61010-2-032, IEC61010-2-033: CAT IV 600 V / CAT III 1000 V, 100 A AC |
| Agency Approvals | CSA, TUV |
| Maximum Voltage | 1000 V between any terminal and earth ground |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Fluke T5-H5-1AC-KIT/US Electrical Tester Kit with Holster and 1AC II Voltage Tester.
| Function Specifications | |
| Jaw Opening | 0.5" (12.9 mm) |
| Max Wire Size | 1/0 THHN Cable |
| Current Range AC RMS | 0 to 100.0 A |
| Accuracy AC Current (50/60 Hz) | 3% ± 3 counts |
| AC Response | Averaging |
| Voltage Range AC/DC | 0 to 1000 V |
| Voltage Accuracy | AC: 1.5% ± 2 counts DC: 1% ± 1 count |
| Resistance Range | 0 to 1000 Ω |
| Continuity Beeper Threshold | On at <25 Ω<br> Off at >400 Ω |
| Volts Indicator LED Threshold | Guaranteed on by 30 V AC |
| Environmental Specifications | |
| Operating Temperature | 14 to 122°F (-10 to 50°C) |
| Storage Temperature | -22 to 140°F (-30 to 60°C) |
| Humidity (Without Condensation) | 0 to 95% at 41 to 86°F (5 to 30°C) 0 to 75% at 86 to 104°F (30 to 40°C) 0 to 45% at 104 to 122°F (40 to 50°C) |
| Dust/Water Resistance | Yes |
| Operating Altitude | 6561.7' (2000 m) max |
| Temperature Coefficient | 0.1 x (specified accuracy)/°C (<18°C or >28°C) |
| Mechanical and General Specifications | |
| Battery Life | 200 hours zinc chloride 400 hours alkaline |
| Battery Type | 2 x AA Batteries |
| Low Battery Indicator | Yes |
| Current Sensor Opening | 0.5" (12.9 mm) |
| Dimensions | 1.2 x 2 x 8" (30.5 x 51 x 203 mm) |
| Weight | 0.7 lb (300 g) |
| Safety Specifications | |
| Measurement Category | IEC 61010-2-032, IEC61010-2-033: CAT IV 600 V / CAT III 1000 V, 100 A AC |
| Agency Approvals | CSA, TUV |
| Maximum Voltage | 1000 V between any terminal and earth ground |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Fluke T5-H5-1AC-KIT/US Electrical Tester Kit with Holster and 1AC II Voltage Tester.
