This electrical tester enhances productivity with its easy to use compact design ideal tool to carry to every job site. Select volts, ohms, or current to check voltage, continuity, and current and the tester does the rest. Features OpenJaw™ to check current up to 100A without breaking the circuit.
This electrical tester enhances productivity with its easy to use compact design ideal tool to carry to every job site. Select volts, ohms, or current to check voltage, continuity, and current and the tester does the rest. Features OpenJaw™ to check current up to 100A without breaking the circuit.
The detachable, SlimReach™ test probes are customized for national electrical standards. Plus, its tough test leads accept optional accessories such as clips and specialty probes. The test leads stow neatly in the back of the tester, making it easy to carry in your tool pouch. Add the optional H5 holster and you can clip the this tester onto your belt.
Features
Automatically measure AC and DC voltage up to 1000 V with precise digital resolution
Measure current up to 100 A without breaking the circuit with OpenJaw™ design
Troubleshoot resistance problems up to 1000 Ω
Work in tight spaces with detachable Slim Reach probe tips
| Function Specifications | |
| Jaw Opening | 0.5" (12.9 mm) |
| Max Wire Size | 1/0 THHN Cable |
| Current Range AC RMS | 0 to 100.0 A |
| Accuracy AC Current (50/60 Hz) | 3% ± 3 counts |
| AC Response | Averaging |
| Voltage Range AC/DC | 0 to 1000 V |
| Voltage Accuracy | AC: 1.5% ± 2 counts DC: 1% ± 1 count |
| Resistance Range | 0 to 1000 Ω |
| Continuity Beeper Threshold | On at <25 Ω Off at >400 Ω |
| Volts Indicator LED Threshold | Guaranteed on by 30 V AC |
| Environmental Specifications | |
| Operating Temperature | 14 to 122°F (-10 to 50°C) |
| Storage Temperature | -22 to 140°F (-30 to 60°C) |
| Humidity (Without Condensation) | 0 to 95% at 41 to 86°F (5 to 30°C) 0 to 75% at 86 to 104°F (30 to 40°C) 0 to 45% at 104 to 122°F (40 to 50°C) |
| Dust/Water Resistance | Yes |
| Operating Altitude | 6561.7' (2000 m) max |
| Temperature Coefficient | 0.1 x (specified accuracy)/°C (<18°C or >28°C) |
| Mechanical and General Specifications | |
| Battery Life | 200 hours zinc chloride 400 hours alkaline |
| Battery Type | 2 x AA Batteries |
| Low Battery Indicator | Yes |
| Current Sensor Opening | 0.5" (12.9 mm) |
| Dimensions | 1.2 x 2 x 8" (30.5 x 51 x 203 mm) |
| Weight | 0.7 lb (300 g) |
| Safety Specifications | |
| Measurement Category | IEC 61010-2-032, IEC61010-2-033: CAT IV 600 V / CAT III 1000 V, 100 A AC |
| Agency Approvals | CSA, TUV |
| Maximum Voltage | 1000 V between any terminal and earth ground |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Fluke T5-1000 USA Voltage, Continuity and Current Tester.
| Function Specifications | |
| Jaw Opening | 0.5" (12.9 mm) |
| Max Wire Size | 1/0 THHN Cable |
| Current Range AC RMS | 0 to 100.0 A |
| Accuracy AC Current (50/60 Hz) | 3% ± 3 counts |
| AC Response | Averaging |
| Voltage Range AC/DC | 0 to 1000 V |
| Voltage Accuracy | AC: 1.5% ± 2 counts DC: 1% ± 1 count |
| Resistance Range | 0 to 1000 Ω |
| Continuity Beeper Threshold | On at <25 Ω Off at >400 Ω |
| Volts Indicator LED Threshold | Guaranteed on by 30 V AC |
| Environmental Specifications | |
| Operating Temperature | 14 to 122°F (-10 to 50°C) |
| Storage Temperature | -22 to 140°F (-30 to 60°C) |
| Humidity (Without Condensation) | 0 to 95% at 41 to 86°F (5 to 30°C) 0 to 75% at 86 to 104°F (30 to 40°C) 0 to 45% at 104 to 122°F (40 to 50°C) |
| Dust/Water Resistance | Yes |
| Operating Altitude | 6561.7' (2000 m) max |
| Temperature Coefficient | 0.1 x (specified accuracy)/°C (<18°C or >28°C) |
| Mechanical and General Specifications | |
| Battery Life | 200 hours zinc chloride 400 hours alkaline |
| Battery Type | 2 x AA Batteries |
| Low Battery Indicator | Yes |
| Current Sensor Opening | 0.5" (12.9 mm) |
| Dimensions | 1.2 x 2 x 8" (30.5 x 51 x 203 mm) |
| Weight | 0.7 lb (300 g) |
| Safety Specifications | |
| Measurement Category | IEC 61010-2-032, IEC61010-2-033: CAT IV 600 V / CAT III 1000 V, 100 A AC |
| Agency Approvals | CSA, TUV |
| Maximum Voltage | 1000 V between any terminal and earth ground |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Fluke T5-1000 USA Voltage, Continuity and Current Tester.
