For use with Fluke Process TV40 series thermal imagers. If the ThermoView® imager needs to be installed in dirty and hot environments, a protective enclosure with water cooling and air purge fittings is needed to guarantee its protection.
For use with Fluke Process TV40 series thermal imagers. If the ThermoView® imager needs to be installed in dirty and hot environments, a protective enclosure with water cooling and air purge fittings is needed to guarantee its protection.
| Environment | |
| Rating | IP67 |
| Ambient Temperature | 200°C (392°F) with 6 l/min (1.5 gal/min) of water at 20°C (68°F) inlet temperature and 6 bar (87 PSI) for front air barrier |
| Air Pressure | 4 to 6 bar (58 to 87 PSI) (Recommended) |
| Mechanical | |
| Construction | Stainless Steel, AISI 316L, Polished |
| Weight | 13 kg (29 lbs), without Camera |
| Cable Gland | M12 x 1.5, threaded holes on the rear flange |
