The digital output module provides 16 channels. A green LED indicates the switched status of each channel. An optocoupler provides electrical isolation between the bus and the field side. For use with Fluke Process TV40 series thermal imagers.
The digital output module provides 16 channels. A green LED indicates the switched status of each channel. An optocoupler provides electrical isolation between the bus and the field side. For use with Fluke Process TV40 series thermal imagers.
| Number of Outputs | 16 |
| Max. Current Consumption (Internal) | 40 mA |
| Voltage Via Power Jumper Contacts | 24 V DC (-25 to 30%) |
| Type of Load | Resistive, Inductive, Lamps |
| Max. Switching Frequency | 1 kHz |
| Max Output Current | 0.5 A, Short-Circuit Protected |
| Current Consumption Type (Field Side) | 29 mA |
| Isolation | 500 V System/Supply |
| Wire Connection | CAGE CLAMP® |
| Cross Sections | 0.08 to 1.5 mm² / AWG 28 to 16 |
| Width | 12 mm (0.47") |
