The corresponding end of the power supply cable is carried out as a pig tail, to connect to an external power supply device. All three sockets of the M16 connector are wired by a 3-wire supply cable. Just socket 1 (brown wire = GND) and 3 (white wire = +VDC) of the M16 connector must be supplied by external VDC if no PoE (Power over Ethernet) is used, leave the socket 2 (black wire) at the other end unwired. For use with Fluke Process TV40 series thermal imagers.
The corresponding end of the power supply cable is carried out as a pig tail, to connect to an external power supply device. All three sockets of the M16 connector are wired by a 3-wire supply cable. Just socket 1 (brown wire = GND) and 3 (white wire = +VDC) of the M16 connector must be supplied by external VDC if no PoE (Power over Ethernet) is used, leave the socket 2 (black wire) at the other end unwired. For use with Fluke Process TV40 series thermal imagers.
| Max Temperature | 80°C (176°F) |
| Length | 25 m (80 ft) |
| Diameter | 5 mm (0.2") |
