This oil deadweight tester with a range up to 1,100kgf/cm2 is capable of calibration over a wide pressure range thanks to its dual-piston design.
This oil deadweight tester with a range up to 1,100kgf/cm2 is capable of calibration over a wide pressure range thanks to its dual-piston design.
This has mounted spirit level and adjustable feet.
Features
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| Model number | 754 | 721/721Ex | 719Pro | 719 | 718 | 717 | 700G | 3130 | 2700G | Dead-weight Testers |
| Application | ||||||||||
| Calibrating pressure transmitters (field) | ● | ● | Ideal | ● | ● | ● | ● | |||
| Calibrating pressure transmitters (bench) | ● | ● | ● | ● | ● | ● | Ideal | ● | ||
| Calibrating HART Smart transmitters | Ideal | |||||||||
| Documenting pressure transmitter calibrations | Ideal | |||||||||
| Testing pressure switches in the field | Ideal | ● | ● | ● | ● | ● | ● | |||
| Testing pressure switches on the bench | ● | ● | ● | ● | ● | ● | Ideal | |||
| Documenting pressure switch tests | Ideal | |||||||||
| Testing pressure switches with live (voltage) contacts | Ideal | |||||||||
| Gas custody transfer computer tests | ● | Ideal | ● | |||||||
| Verifying process pressure gauges (field) | Ideal | ● | ● | ● | ● | ● | ● | |||
| Verifying process pressure gauges (bench) | ● | ● | ● | ● | ● | ● | ● | ● | Ideal | |
| Logging pressure measurements | ● | Ideal | ● | |||||||
| Testing pressure devices using a reference gauge | Ideal | |||||||||
| Hydrostatic vessel testing | Ideal | |||||||||
| Leak testing (pressure measurement logging) | ● | Ideal | ||||||||
| Standard Weight Material | Series 3 non-magnetic austenitic stainless steel |
| Weight Density | 7.8g/cm3 |
| Optional Fractional Weights | Solution heat-treated aluminum |
| Piston Material | Tungsten carbide with nickel binder |
| Density | 15g/cm3 |
| Cylinder Material | Hardened martensitic steel; tungsten carbide (water above 500psi, 35bar) |
| Thermal Coefficients of Expansion | Oil piston/cylinder: 16.5ppm/°C; water: (above 500psi, 35bar) 11ppm/°C |
| Test Port Adapters | 1/8, 1/4, 3/8 and 1/2 NPT or BSP |
| Reservoir Volume | 150cc |
| Screw Press Displacement | 5.5cc |
| Pump Displacement | 4.7cc per stroke |
| O-Ring Seal Materials | Buna N as standard, Viton and EPDM available |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Fluke P3125-KGCM2 Oil Deadweight Tester, 1,100kgf/cm2.
| Standard Weight Material | Series 3 non-magnetic austenitic stainless steel |
| Weight Density | 7.8g/cm3 |
| Optional Fractional Weights | Solution heat-treated aluminum |
| Piston Material | Tungsten carbide with nickel binder |
| Density | 15g/cm3 |
| Cylinder Material | Hardened martensitic steel; tungsten carbide (water above 500psi, 35bar) |
| Thermal Coefficients of Expansion | Oil piston/cylinder: 16.5ppm/°C; water: (above 500psi, 35bar) 11ppm/°C |
| Test Port Adapters | 1/8, 1/4, 3/8 and 1/2 NPT or BSP |
| Reservoir Volume | 150cc |
| Screw Press Displacement | 5.5cc |
| Pump Displacement | 4.7cc per stroke |
| O-Ring Seal Materials | Buna N as standard, Viton and EPDM available |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Fluke P3125-KGCM2 Oil Deadweight Tester, 1,100kgf/cm2.
