Applications
| OTDR Specifications | |
| Multimode module | |
| Wavelengths | 850 nm ± 10 nm 1300 nm +35/-15 nm |
| Compatible Fiber Types | 50/125 µm 62.5/125 µm |
| Event Dead Zone 1 | 850 nm: 0.5 m typical 1300 nm: 0.7 m typical |
| Attenuation Dead Zone 2 | 850 nm: 2.5 m typical 1300 nm: 4.5 m typical |
| Dynamic Range 3, 5, 6 | 850 nm: 28 dB typical 1300 nm: 30 dB typical |
| Max Distance Range Setting | 40 km |
| Distance Measurement Range 4, 5, 7, 8, 9, 10 | 850 nm: 9 km 1300 nm: 35 km |
| Reflectance Range 4, 5 | 850 nm: -14 dB to -57 dB (typical) 1300 nm: -14 dB to -62 dB (typical) |
| Sample Resolution | 3 cm to 400 cm |
| Pulse Widths (nominal) | 850 nm: 3, 5, 20, 40, 200 ns 1300 nm: 3, 5, 20, 40, 200, 1000 ns |
| Test Rime (per wavelength) | Auto setting: 5 sec (typical) |
| Quick test setting: 2 sec (typical) |
Quick test setting: 5 sec (typical) |
| Best resolution setting: 2 to 180 sec |
Best resolution setting: 5 to 180 sec |
| FaultMap setting: 2 sec (typical), 180 sec (max) |
FaultMap setting: 10 sec (typical), 180 sec (max) |
| DataCenter OTDR setting: 1 sec (typical at 850 nm), 7 sec (max) |
DataCenter OTDR setting: 20 sec (typical), 40 sec (max) |
| Manual setting: 3, 5, 10, 20, 40, 60, 90, 120, 180 sec |
Manual setting: 3, 5, 10, 20, 40, 60, 90, 120, 180 sec |
| FiberInspector Probe Specifications | |
| Magnification | ~ 200X with OptiFiber Pro Display |
| Light source | Blue LED |
| Power source | TFS mainframe |
| Field of View (FOV) | Horizontal: 425 µm Vertical: 320 µm |
| Minimum detectable particle size | 0.5 µm |
| Dimensions | Approximately 6.75 x 1.5 in (1175 x 35 mm) without adapter tip |
| Weight | 200 g |
| Temperature range | Operating: 32 to 122°F (0 to 50°C) Storage: -4 to 158°F (-20 to 70°C) |
| Certifications | CE (when used with the mainframe) |
| VFL Specifications | |
| On/Off control | Mechanical switch and a button on the touch screen |
| Output power | 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm) |
| Operating wavelength | 650 nm nominal |
| Spectral width (RMS) | ±3 nm |
| Output modes | Continuous wave Pulsed mode (2 Hz to 3 Hz blink frequency) |
| Connector adapter | 2.5 mm universal |
| Laser safety (classification) | Class II CDRH Complies to EN 60825-2 |
| General Specifications | |
| Weight | 3lbs, 5 oz (1.28 kg) |
| Dimensions | 2.625 x 5.25 x 11.0 in (6.67 x 13.33 x 27.94 cm) |
| Battery | Lithium ion battery pack, 7.2 volts |
| Battery life | Eight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber |
| Charge Time | Tester Off: Four hours to charge from 10% to 90% capacity Tester On: Six hours to charge from 10% to 90% capacity with the tester on |
| Environmental Specifications | |
| Operating temperature* | -18 to 45°C |
| Non-operating temperature | -30 to 60°C |
| Operating altitude | 4,000 m (13123 ft) 3200 m (10,500 ft) with AC adapter |
| Storage altitude | 12,000 m |
| EMC | EN 61326-1 |
| OTDR Specifications | |
| Multimode module | |
| Wavelengths | 850 nm ± 10 nm 1300 nm +35/-15 nm |
| Compatible Fiber Types | 50/125 µm 62.5/125 µm |
| Event Dead Zone 1 | 850 nm: 0.5 m typical 1300 nm: 0.7 m typical |
| Attenuation Dead Zone 2 | 850 nm: 2.5 m typical 1300 nm: 4.5 m typical |
| Dynamic Range 3, 5, 6 | 850 nm: 28 dB typical 1300 nm: 30 dB typical |
| Max Distance Range Setting | 40 km |
| Distance Measurement Range 4, 5, 7, 8, 9, 10 | 850 nm: 9 km 1300 nm: 35 km |
| Reflectance Range 4, 5 | 850 nm: -14 dB to -57 dB (typical) 1300 nm: -14 dB to -62 dB (typical) |
| Sample Resolution | 3 cm to 400 cm |
| Pulse Widths (nominal) | 850 nm: 3, 5, 20, 40, 200 ns 1300 nm: 3, 5, 20, 40, 200, 1000 ns |
| Test Rime (per wavelength) | Auto setting: 5 sec (typical) |
| Quick test setting: 2 sec (typical) |
Quick test setting: 5 sec (typical) |
| Best resolution setting: 2 to 180 sec |
Best resolution setting: 5 to 180 sec |
| FaultMap setting: 2 sec (typical), 180 sec (max) |
FaultMap setting: 10 sec (typical), 180 sec (max) |
| DataCenter OTDR setting: 1 sec (typical at 850 nm), 7 sec (max) |
DataCenter OTDR setting: 20 sec (typical), 40 sec (max) |
| Manual setting: 3, 5, 10, 20, 40, 60, 90, 120, 180 sec |
Manual setting: 3, 5, 10, 20, 40, 60, 90, 120, 180 sec |
| FiberInspector Probe Specifications | |
| Magnification | ~ 200X with OptiFiber Pro Display |
| Light source | Blue LED |
| Power source | TFS mainframe |
| Field of View (FOV) | Horizontal: 425 µm Vertical: 320 µm |
| Minimum detectable particle size | 0.5 µm |
| Dimensions | Approximately 6.75 x 1.5 in (1175 x 35 mm) without adapter tip |
| Weight | 200 g |
| Temperature range | Operating: 32 to 122°F (0 to 50°C) Storage: -4 to 158°F (-20 to 70°C) |
| Certifications | CE (when used with the mainframe) |
| VFL Specifications | |
| On/Off control | Mechanical switch and a button on the touch screen |
| Output power | 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm) |
| Operating wavelength | 650 nm nominal |
| Spectral width (RMS) | ±3 nm |
| Output modes | Continuous wave Pulsed mode (2 Hz to 3 Hz blink frequency) |
| Connector adapter | 2.5 mm universal |
| Laser safety (classification) | Class II CDRH Complies to EN 60825-2 |
| General Specifications | |
| Weight | 3lbs, 5 oz (1.28 kg) |
| Dimensions | 2.625 x 5.25 x 11.0 in (6.67 x 13.33 x 27.94 cm) |
| Battery | Lithium ion battery pack, 7.2 volts |
| Battery life | Eight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber |
| Charge Time | Tester Off: Four hours to charge from 10% to 90% capacity Tester On: Six hours to charge from 10% to 90% capacity with the tester on |
| Environmental Specifications | |
| Operating temperature* | -18 to 45°C |
| Non-operating temperature | -30 to 60°C |
| Operating altitude | 4,000 m (13123 ft) 3200 m (10,500 ft) with AC adapter |
| Storage altitude | 12,000 m |
| EMC | EN 61326-1 |
