The OFP-100-M/INTL Pro Multimode OTDR kit is focused on reducing costs while enhancing productivity and improving network reliability. This is the non-wireless version and is available for countries where the WiFi adapter is not certified or for customers who do not wish to receive the WiFi adapter.
The OFP-100-M/INTL Pro Multimode OTDR kit is focused on reducing costs while enhancing productivity and improving network reliability. This is the non-wireless version and is available for countries where the WiFi adapter is not certified or for customers who do not wish to receive the WiFi adapter.
Applications
| Wavelengths | 850 nm +/- 10 nm 1300 nm +35/-15 nm |
| Compatible Fiber Types | 50/125 µm 62.5/125 µm |
| Event Dead Zone | 850 nm: 0.5 m typical 1300 nm: 0.7 m typical |
| Attenuation Dead Zone | 850 nm: 2.5 m typical 1300 nm: 4.5 m typical |
| Dynamic Range | 850 nm: 28 dB typical 1300 nm: 30 dB typical |
| Max Distance Range Setting | 40 km |
| Distance Measurement Range | 850 nm: 9 km 1300 nm: 35 km |
| Reflectance Range | 850 nm: -14 dB to -57 dB (typical) 1300 nm: -14 dB to -62 dB (typical) |
| Sample Resolution | 3 cm to 400 cm |
| Pulse Widths (Nominal) | 850 nm: 3, 5, 20, 40, 200 ns 1300 nm: 3, 5, 20, 40, 200, 1000 ns |
| Test Time (Per Wavelength) | Auto Setting: 5 sec (Typical) Quick Test Setting: 2 sec (Typical) Best Resolution Setting: 2 to 180 sec FaultMap Setting: 2 sec (Typical), 180 sec (Max) DataCenter OTDR Setting: 1 sec (Typical at 850 nm), 7 sec (Max) Manual Setting: 3, 5, 10, 20, 40, 60, 90, 120, 180 sec |
| FiberInspector Probe | |
| Magnification | ~200X with OptiFiber Pro Display |
| Light Source | Blue LED |
| Power Source | Versiv Mainframe |
| Field of View (FOV) | Horizontal: 425 µm Vertical: 320 µm |
| Minimum Detectable Particle Size | 0.5 µm |
| Dimensions | Approximately 6.75" x 1.5" (1175 mm x 35 mm) Without Adapter Tip |
| Weight | 200 g |
| Temperature Range | Operating: 32 to 122°F (0 to +50°C) Storage: -4 to +158°F (-20 to +70°C) |
| Certifications | CE (when used with the mainframe) |
| VFL | |
| On/Off Control | Mechanical switch and a button on the touch screen |
| Output Power | 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm) |
| Operating Wavelength | 650 nm Nominal |
| Spectral Width (RMS) | ±3 nm |
| Output Modes | Continuous Wave Pulsed mode (2 Hz to 3 Hz blink frequency) |
| Connector Adapter | 2.5 mm Universal |
| Laser Safety (Classification) | Class II CDRH Complies to EN 60825-2 |
| Environmental specifications | |
| Operating temperature* | -10 to 45°C |
| Storage Temperature | -10 to +60°C |
| Operating Altitude | 4,000 m (13,123 ft) 3,200 m (10,500 ft) with AC Adapter |
| Storage Altitude | 12,000 m |
| EMC | EN 61326-1 |
| General Specifications | |
| Weight | Mainframe with module and battery: 3 lbs, 5 oz (1.28 kg) |
| Dimensions | Mainframe with module and battery: 2.625 x 5.25 x 11.0" ( 6.67 x 13.33 x 27.94 cm) |
| Battery | Lithium ion battery pack, 7.2 volts |
| Battery Life | Eight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber |
| Charge Time | Tester Off: Four hours to charge from 10% to 90% capacity Tester On: Six hours to charge from 10% to 90% capacity |
| Wavelengths | 850 nm +/- 10 nm 1300 nm +35/-15 nm |
| Compatible Fiber Types | 50/125 µm 62.5/125 µm |
| Event Dead Zone | 850 nm: 0.5 m typical 1300 nm: 0.7 m typical |
| Attenuation Dead Zone | 850 nm: 2.5 m typical 1300 nm: 4.5 m typical |
| Dynamic Range | 850 nm: 28 dB typical 1300 nm: 30 dB typical |
| Max Distance Range Setting | 40 km |
| Distance Measurement Range | 850 nm: 9 km 1300 nm: 35 km |
| Reflectance Range | 850 nm: -14 dB to -57 dB (typical) 1300 nm: -14 dB to -62 dB (typical) |
| Sample Resolution | 3 cm to 400 cm |
| Pulse Widths (Nominal) | 850 nm: 3, 5, 20, 40, 200 ns 1300 nm: 3, 5, 20, 40, 200, 1000 ns |
| Test Time (Per Wavelength) | Auto Setting: 5 sec (Typical) Quick Test Setting: 2 sec (Typical) Best Resolution Setting: 2 to 180 sec FaultMap Setting: 2 sec (Typical), 180 sec (Max) DataCenter OTDR Setting: 1 sec (Typical at 850 nm), 7 sec (Max) Manual Setting: 3, 5, 10, 20, 40, 60, 90, 120, 180 sec |
| FiberInspector Probe | |
| Magnification | ~200X with OptiFiber Pro Display |
| Light Source | Blue LED |
| Power Source | Versiv Mainframe |
| Field of View (FOV) | Horizontal: 425 µm Vertical: 320 µm |
| Minimum Detectable Particle Size | 0.5 µm |
| Dimensions | Approximately 6.75" x 1.5" (1175 mm x 35 mm) Without Adapter Tip |
| Weight | 200 g |
| Temperature Range | Operating: 32 to 122°F (0 to +50°C) Storage: -4 to +158°F (-20 to +70°C) |
| Certifications | CE (when used with the mainframe) |
| VFL | |
| On/Off Control | Mechanical switch and a button on the touch screen |
| Output Power | 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm) |
| Operating Wavelength | 650 nm Nominal |
| Spectral Width (RMS) | ±3 nm |
| Output Modes | Continuous Wave Pulsed mode (2 Hz to 3 Hz blink frequency) |
| Connector Adapter | 2.5 mm Universal |
| Laser Safety (Classification) | Class II CDRH Complies to EN 60825-2 |
| Environmental specifications | |
| Operating temperature* | -10 to 45°C |
| Storage Temperature | -10 to +60°C |
| Operating Altitude | 4,000 m (13,123 ft) 3,200 m (10,500 ft) with AC Adapter |
| Storage Altitude | 12,000 m |
| EMC | EN 61326-1 |
| General Specifications | |
| Weight | Mainframe with module and battery: 3 lbs, 5 oz (1.28 kg) |
| Dimensions | Mainframe with module and battery: 2.625 x 5.25 x 11.0" ( 6.67 x 13.33 x 27.94 cm) |
| Battery | Lithium ion battery pack, 7.2 volts |
| Battery Life | Eight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber |
| Charge Time | Tester Off: Four hours to charge from 10% to 90% capacity Tester On: Six hours to charge from 10% to 90% capacity |
