An open-jaw, clamp-on current probe with a current range of 2000 A, and an accuracy of 0.8%, that is also safety rated for CAT III 1000 V, CAT IV 600 V environments.
An open-jaw, clamp-on current probe with a current range of 2000 A, and an accuracy of 0.8%, that is also safety rated for CAT III 1000 V, CAT IV 600 V environments.
| Electrical | |
| Current Range | 2000 A AC rms, ± 2000 A DC |
| Output Sensitivity | 1 mV/A |
| Accuracy | ±0.8% of reading ±0.2% of range |
| Bandwidth for Accuracy Specification | DC to 400 Hz |
| Load Impedance | >1 MΩ and <10 pF |
| Frequency Response (Small Signal) | DC to 20 kHz (-3 dB) |
| Temperature Coefficient | 0.1 x specified accuracy for each degree C above 28°C or below 18°C |
| Working Voltage | 1000 V AC RMS or DC |
| General Specifications | |
| Operating Temperature | 14 to 122°F (-10 to 50°C) |
| Storage Temperature | -22 to 140°F (-30 to 60°C), with battery removed |
| Operating Humidity | ≤90% RH (at 50 to 86°F [10 to 30°C]) ≤75% RH (at 86 to 104°F [30 to 40°C]) ≤45% RH (at 104 to 122°F [40 to 50°C]) |
| Altitude | Operating: 6561.68' (2000 m) Storage: 39,370.1' (12,000 m) |
| Demagnetize Clamp | Open and close the clamp jaws several times with soft click, use of the clamp on uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less |
| Power Supply | 2 x AA alkaline batteries, IEC LR6 |
| Battery Life | 150 hours (typically) |
| Low Battery Indicator | Yes |
| Safety | IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V |
| Ingress Protection | IEC 60529, IP40 |
| Output to Zero | Auto adjustment with Zero button |
| Output Cable | 60" (1.5 m) shielded coaxial cable with BNC plug |
| Maximum Conductor Size | 2.05" (52 mm) |
| Maximum Jaw Opening | 3.2" (81.5 mm) |
| Dimensions | 4.33 x 10.63 x 1.81" (110 x 270 x 46 mm) |
| Weight | 1.6 lbs (0.71 kg), including battery |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Fluke 80i-2010s AC/DC Current Clamp, 2000 A.
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Fluke 80i-2010s AC/DC Current Clamp, 2000 A.
