Fluke 2AC VoltAlert Non-Contact Voltage Tester, 90 to 1000 V AC

Modèle: 2AC/90-1000VC | CUP: 095969564427

Fluke 2AC VoltAlert Non-Contact Voltage Tester, 90 to 1000 V AC-


Télécharger: datasheet manual

Plus de produits Fluke

Demander à un expert

Fluke 2AC VoltAlert Non-Contact Voltage Tester, 90 to 1000 V AC

Modèle: 2AC/90-1000VC | CUP: 095969564427

Compact and easy to use, this voltage tester is always on for faster, safer voltage testing and is your first-choice tool for go/no-go testing. In addition, the tip of this pocket-sized tester will glow red when within proximity of an outlet, terminal strip, or power cord where voltage is present.

Compact and easy to use, this voltage tester is always on for faster, safer voltage testing and is your first-choice tool for go/no-go testing. In addition, the tip of this pocket-sized tester will glow red when within proximity of an outlet, terminal strip, or power cord where voltage is present.

Prix spécial $51.34 CAD
Prix régulier $62.99 CAD
Disponibilité 47 en inventaire
Quantité

Fluke 2AC/90-1000VC offre

Caractéristiques

  • Non-contact voltage detection from 90 to 1000 V AC
  • Innovative 'battery check' ensures battery is in good condition
  • Integrated clip design, optimized for pocket storage*

*Use of battery check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after use.

Always on for faster, safer voltage testing

This tester is designed to be pocket-sized and easy to use. The tip of this pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. It is always on, with a battery check function to make sure the tester is working properly.

Your first-choice tool for go/no-go testing

This tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house.

  • CAT IV 1000 V overvoltage rated product for best in class user protection
  • Suitable for a wide range of residential, commercial and industrial needs
  • Rugged and reliable

Applications

  • DIY
  • Electrical
  • Commercial
  • Industrial
  • Residential

Spécifications pour le Fluke 2AC/90-1000VC

Operating Range/Principles 90 to 1000 V AC, CAT IV 1000 V rated
Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage
Compliance Safety: Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2
EMC: Meets IEC 61326-1:2006
Operating/Storage Temperature -14 to 122°F (-10 to 50°C)
Operating Humidity 0 to 95% (32 to 86°F [0 to 30°C])
0 to 75% (86 to 104°F [30 to 40°C])
0 to 45% (104 to 131°F [40 to 55°C])
Altitude 6561.68' (2000 m), CAT IV 1000 V
Cleaning Clean with damp cloth
Battery Life Typical battery life of greater than one year

Le Fluke 2AC/90-1000VC comprend

  • Non-Contact Voltage Tester
  • Two-Year Warranty

Webinaire: Sécurité de l'appareil électrique avec Fluke


Lorsque la sécurité est en tête, tout le monde en profite. S'assurer que votre installation utilise les meilleures pratiques en matière de lieu de travail, les normes d'outils d'essai et les cotes, et tient compte des dangers et des causes des incidents rendra l'environnement de travail plus sécuritaire. Prendre des mesures pour améliorer ces aspects vous permettra de profiter d'avantages sociaux, comme une productivité accrue et une réduction des coûts liés aux actifs et aux accidents. De nombreux outils peuvent vous aider à améliorer la sécurité en testant, en entretenant, en surveillant ou en dépannant l'appareil électrique sous tension.

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Fluke 2AC VoltAlert Non-Contact Voltage Tester, 90 to 1000 V AC.

Fluke TB25 Sac de rangement pour seau à outils, 5.2 gal TB25
Durable et robuste, ce sac de rangement de seau à outils a une capacité de 5.2 gallons sur laquelle on peut compter pour protéger et transporter en toute sécurité une variété d'outils et d'accessoires de test. Avec sa coque à fond rigide imperméable, cet organisateur polyvalent possède un total de 28 poches qui peuvent s'adapter aux outils à main, aux multimètres numériques, aux pinces ampèremétriques, aux sondes d'essai et plus encore.




Poser une question sur le Fluke 2AC VoltAlert Non-Contact Voltage Tester, 90 to 1000 V AC

Fluke 2AC/90-1000VC offre

Caractéristiques

  • Non-contact voltage detection from 90 to 1000 V AC
  • Innovative 'battery check' ensures battery is in good condition
  • Integrated clip design, optimized for pocket storage*

*Use of battery check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after use.

Always on for faster, safer voltage testing

This tester is designed to be pocket-sized and easy to use. The tip of this pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. It is always on, with a battery check function to make sure the tester is working properly.

Your first-choice tool for go/no-go testing

This tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house.

  • CAT IV 1000 V overvoltage rated product for best in class user protection
  • Suitable for a wide range of residential, commercial and industrial needs
  • Rugged and reliable

Applications

  • DIY
  • Electrical
  • Commercial
  • Industrial
  • Residential

Spécifications pour le Fluke 2AC/90-1000VC

Operating Range/Principles 90 to 1000 V AC, CAT IV 1000 V rated
Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage
Compliance Safety: Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2
EMC: Meets IEC 61326-1:2006
Operating/Storage Temperature -14 to 122°F (-10 to 50°C)
Operating Humidity 0 to 95% (32 to 86°F [0 to 30°C])
0 to 75% (86 to 104°F [30 to 40°C])
0 to 45% (104 to 131°F [40 to 55°C])
Altitude 6561.68' (2000 m), CAT IV 1000 V
Cleaning Clean with damp cloth
Battery Life Typical battery life of greater than one year

Le Fluke 2AC/90-1000VC comprend

  • Non-Contact Voltage Tester
  • Two-Year Warranty

Webinaire: Sécurité de l'appareil électrique avec Fluke


Lorsque la sécurité est en tête, tout le monde en profite. S'assurer que votre installation utilise les meilleures pratiques en matière de lieu de travail, les normes d'outils d'essai et les cotes, et tient compte des dangers et des causes des incidents rendra l'environnement de travail plus sécuritaire. Prendre des mesures pour améliorer ces aspects vous permettra de profiter d'avantages sociaux, comme une productivité accrue et une réduction des coûts liés aux actifs et aux accidents. De nombreux outils peuvent vous aider à améliorer la sécurité en testant, en entretenant, en surveillant ou en dépannant l'appareil électrique sous tension.

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Fluke 2AC VoltAlert Non-Contact Voltage Tester, 90 to 1000 V AC.

Fluke TB25 Sac de rangement pour seau à outils, 5.2 gal TB25
Durable et robuste, ce sac de rangement de seau à outils a une capacité de 5.2 gallons sur laquelle on peut compter pour protéger et transporter en toute sécurité une variété d'outils et d'accessoires de test. Avec sa coque à fond rigide imperméable, cet organisateur polyvalent possède un total de 28 poches qui peuvent s'adapter aux outils à main, aux multimètres numériques, aux pinces ampèremétriques, aux sondes d'essai et plus encore.




Poser une question sur le Fluke 2AC VoltAlert Non-Contact Voltage Tester, 90 to 1000 V AC

Plus de produits Fluke