Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

3991 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

3991 COMMENTAIRES

FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM)

Modèle: G2S15TQ9GMB

FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM)-

Télécharger: datasheet manual

Plus de produits FLOMEC

Demander à un expert

FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM)

Modèle: G2S15TQ9GMB

This Stainless Steel 1 ½ in. flowmeter comes with Tri-Clover® sanitary fittings, the 09 Computer, and is calibrated to read gallons per minute (GPM).

This Stainless Steel 1 ½ in. flowmeter comes with Tri-Clover® sanitary fittings, the 09 Computer, and is calibrated to read gallons per minute (GPM).

Prix spécial $1701.70 CAD
Prix régulier $1870.00 CAD
Disponibilité 7 à 8 semaines
Quantité

Accessoires recommandées

FLOMEC 125066-500 Output Cable Kit, 100ft-

FLOMEC 125066-500 Output Cable Kit, 100ft

125066-500

FLOMEC 113272-500 Remote Cable Kit, 100ft-

FLOMEC 113272-500 Remote Cable Kit, 100ft

113272-500

FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters-

FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters

125080-1

FLOMEC 11344001 510 Conversion Kit-

FLOMEC 11344001 510 Conversion Kit

11344001

FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH-

FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH

113265-1

FLOMEC G2S15TQ9GMB Offers

This GPI 1-1/2in.stainless steel flowmeter line is used with ammonium, plating solutions, caustic and acidic cleaning agents, fuel products and other chemicals. Accurate to +/-1.0% of reading for flow rates from 10 to 100 GPM.

Features

  • Stainless steep meters have excellent chemical properties
  • Modular design allows for use with output modules, sensors and remote transmitters
  • 2 totals (batch = resettable, cumulative = nonresettable); rate of Flow. Factory calibrated in gallons and liters. Field calibration. Allows user calibration. Includes non-volatile totals
  • High accuracy meter
  • Internal parts are simple to replace for easy maintenance
  • Lithium battery life: 5 years
  • Accessories easily upgrade meter

FLOMEC G2S15TQ9GMB Specifications

Fitting Type: Tri-Clover®
Housing Material: 316 Stainless Steel
Meter Sizes Available: 1-1/2", 2"
Tri-Clover® Fittings Available: 1-1/2", 2"
Flow Range 1-1/2" (S15T) 10 - 100 GPM, (38.0 - 380 LPM)
Flow Range 2" (S20T) 20 - 200 GPM, (76 - 760 LPM)
Accuracy (% of Reading) 1-1/2" (S15T) [Turbine Only] ± 1.0%, [Turbine w/Computer] ± 0.75%
Pressure Rating Limited by fitting size, clamp size & temperature
Accuracy (% of Reading) 2" (S20T) [Turbine Only] ± 1.0%, [Turbine w/Computer] ± 0.75%
Repeatability: ± 0.1%
Operating Temperature Range: -40° F to +250° F (-40° C to +121° C)
Cliquer ici pour toutes les spécifications du FLOMEC G2S15TQ9GMB

What's included with the FLOMEC G2S15TQ9GMB

  • Flowmeter
  • Non-volatile totals
  • Lithium battery
  • Manual
datasheet pour le FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM) manual pour le FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM) manual pour le FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM)

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM).

FLOMEC 113275-10 FM-Approved Remote Assembly Kit for the A1/G2/TM/03 series 113275-10
Compatible with the A1, G2, TM, and 03 Series digital turbine meters, this remote assembly kit modifies the meters for applications in specialized situations, including remote indication and high/low fluid temperature metering. In addition, this kit comes with a sensor module, a dust cover assembly, and 10' (3 m) of cable.



FLOMEC 125066-500 Output Cable Kit, 100ft 125066-500
Flomec output cable kit for use with conditioned signal output module, 4-20mA module and pulse access module.



FLOMEC 113272-500 Remote Cable Kit, 100ft 113272-500
Flomec remote cable kit for use with G2 Series Turbine Flowmeters. Features 2-Wires and Belden Shielded.



FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH 113265-1
Compatible with the A1 and G2 series of low-flow turbine flow meters, this remote kit allows for the flexibility of isolating the flow sensor from a panel-mounted digital indicator or a control device. In addition, safely and successfully measure high and low-temperature fluids.



FLOMEC 113437-01 Conduit Adapter Kit 113437-01
The Conduit Adapter allows you to enclose wiring from the magnetic pickup. The kit includes a turbine meter cover with a 1 in. male NPT conduit fitting and screws for plastic or metal installation.



FLOMEC 11344001 510 Conversion Kit 11344001
This new kit combines the Conduit Adapter with a magnetic pickup to allow easy installation of the 510 Series Displays or Transmitters to a G2 Meter.



FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters 125080-1
Used with the Remote Kit, this part replaces the dust cover that houses the electronic display. This module provides a digital, open collector (NPN) output signal. Use this combination to communicate to a PLC or other piece of electronic equipment.



FLOMEC 901002-52 Computer O-Ring, G2 Series 901002-52
Spare O-Ring for your G2 series flowmeters.



FLOMEC 113435-10 Conditioned Signal Output Module 113435-10
Provides two digital signals: Open Collector or 6-volt Square Wave and can communicate with most process control devices. This kit can upgrade an existing FLOMEC meter or can be purchased with a new meter.



Poser une question sur le FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM)

FLOMEC G2S15TQ9GMB Offers

This GPI 1-1/2in.stainless steel flowmeter line is used with ammonium, plating solutions, caustic and acidic cleaning agents, fuel products and other chemicals. Accurate to +/-1.0% of reading for flow rates from 10 to 100 GPM.

Features

  • Stainless steep meters have excellent chemical properties
  • Modular design allows for use with output modules, sensors and remote transmitters
  • 2 totals (batch = resettable, cumulative = nonresettable); rate of Flow. Factory calibrated in gallons and liters. Field calibration. Allows user calibration. Includes non-volatile totals
  • High accuracy meter
  • Internal parts are simple to replace for easy maintenance
  • Lithium battery life: 5 years
  • Accessories easily upgrade meter
En savoir plus...

FLOMEC G2S15TQ9GMB Specifications

Fitting Type: Tri-Clover®
Housing Material: 316 Stainless Steel
Meter Sizes Available: 1-1/2", 2"
Tri-Clover® Fittings Available: 1-1/2", 2"
Flow Range 1-1/2" (S15T) 10 - 100 GPM, (38.0 - 380 LPM)
Flow Range 2" (S20T) 20 - 200 GPM, (76 - 760 LPM)
Accuracy (% of Reading) 1-1/2" (S15T) [Turbine Only] ± 1.0%, [Turbine w/Computer] ± 0.75%
Pressure Rating Limited by fitting size, clamp size & temperature
Accuracy (% of Reading) 2" (S20T) [Turbine Only] ± 1.0%, [Turbine w/Computer] ± 0.75%
Repeatability: ± 0.1%
Operating Temperature Range: -40° F to +250° F (-40° C to +121° C)
Cliquer ici pour toutes les spécifications du FLOMEC G2S15TQ9GMB

What's included with the FLOMEC G2S15TQ9GMB

  • Flowmeter
  • Non-volatile totals
  • Lithium battery
  • Manual
datasheet pour le FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM) manual pour le FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM) manual pour le FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM)

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM).

FLOMEC 113275-10 FM-Approved Remote Assembly Kit for the A1/G2/TM/03 series 113275-10
Compatible with the A1, G2, TM, and 03 Series digital turbine meters, this remote assembly kit modifies the meters for applications in specialized situations, including remote indication and high/low fluid temperature metering. In addition, this kit comes with a sensor module, a dust cover assembly, and 10' (3 m) of cable.



FLOMEC 125066-500 Output Cable Kit, 100ft 125066-500
Flomec output cable kit for use with conditioned signal output module, 4-20mA module and pulse access module.



FLOMEC 113272-500 Remote Cable Kit, 100ft 113272-500
Flomec remote cable kit for use with G2 Series Turbine Flowmeters. Features 2-Wires and Belden Shielded.



FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH 113265-1
Compatible with the A1 and G2 series of low-flow turbine flow meters, this remote kit allows for the flexibility of isolating the flow sensor from a panel-mounted digital indicator or a control device. In addition, safely and successfully measure high and low-temperature fluids.



FLOMEC 113437-01 Conduit Adapter Kit 113437-01
The Conduit Adapter allows you to enclose wiring from the magnetic pickup. The kit includes a turbine meter cover with a 1 in. male NPT conduit fitting and screws for plastic or metal installation.



FLOMEC 11344001 510 Conversion Kit 11344001
This new kit combines the Conduit Adapter with a magnetic pickup to allow easy installation of the 510 Series Displays or Transmitters to a G2 Meter.



FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters 125080-1
Used with the Remote Kit, this part replaces the dust cover that houses the electronic display. This module provides a digital, open collector (NPN) output signal. Use this combination to communicate to a PLC or other piece of electronic equipment.



FLOMEC 901002-52 Computer O-Ring, G2 Series 901002-52
Spare O-Ring for your G2 series flowmeters.



FLOMEC 113435-10 Conditioned Signal Output Module 113435-10
Provides two digital signals: Open Collector or 6-volt Square Wave and can communicate with most process control devices. This kit can upgrade an existing FLOMEC meter or can be purchased with a new meter.



Poser une question sur le FLOMEC G2S15TQ9GMB 1-1/2" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 10-100 GPM (38.0-380 LPM)

Plus de produits FLOMEC



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.