Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

4041 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

4041 COMMENTAIRES

FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in

Modèle: G2S07TQ9GMA

FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in-

Télécharger: datasheet manual

Plus de produits FLOMEC

Demander à un expert

FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in

Modèle: G2S07TQ9GMA

This Stainless Steel 3/4in flowmeter comes with Tri-Clover sanitary fittings, the 09 Computer, and is calibrated to read gallons per minute (GPM). Modular design allows for use with output modules sensors and remote transmitters.

This Stainless Steel 3/4in flowmeter comes with Tri-Clover sanitary fittings, the 09 Computer, and is calibrated to read gallons per minute (GPM). Modular design allows for use with output modules sensors and remote transmitters.

Prix spécial $1204.84 CAD
Prix régulier $1324.00 CAD
Disponibilité 2 à 3 semaines
Quantité

Accessoires recommandées

FLOMEC 125066-500 Output Cable Kit, 100ft-

FLOMEC 125066-500 Output Cable Kit, 100ft

125066-500

FLOMEC 113272-500 Remote Cable Kit, 100ft-

FLOMEC 113272-500 Remote Cable Kit, 100ft

113272-500

FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters-

FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters

125080-1

FLOMEC 11344001 510 Conversion Kit-

FLOMEC 11344001 510 Conversion Kit

11344001

FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH-

FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH

113265-1

FLOMEC G2S07TQ9GMA Offers

Features

  • Operating Temperature: 0 to 140°F
  • Flow Range: 5 to 50 GPM
  • Frequency: 47 to 470 Hz at 5 to 50 GPM
  • Pressure Rating: Flange Rule
  • Stainless Steel

Applications

  • Water
  • Oil
  • Chemicals
  • Petroleum Products
  • Fuels
  • Lubricants

FLOMEC G2S07TQ9GMA Specifications

Design Type Turbine
Fitting 1in Tri Clover
Flow Range 2 to 20 GPM
Frequency 37 to 370 Hz at 2 to 20 GPM
Recommended Strainer Size 55 mesh
Display LCD - 09 Computer
Reads Gallons
Pressure Rating Limited by fitting size, clamp size & temperature
Cliquer ici pour toutes les spécifications du FLOMEC G2S07TQ9GMA

Le FLOMEC G2S07TQ9GMA comprend

  • FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in
datasheet pour le FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in manual pour le FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in manual pour le FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in.

FLOMEC 113275-10 FM-Approved Remote Assembly Kit for the A1/G2/TM/03 series 113275-10
Compatible with the A1, G2, TM, and 03 Series digital turbine meters, this remote assembly kit modifies the meters for applications in specialized situations, including remote indication and high/low fluid temperature metering. In addition, this kit comes with a sensor module, a dust cover assembly, and 10' (3 m) of cable.



FLOMEC 125066-500 Output Cable Kit, 100ft 125066-500
Flomec output cable kit for use with conditioned signal output module, 4-20mA module and pulse access module.



FLOMEC 113272-500 Remote Cable Kit, 100ft 113272-500
Flomec remote cable kit for use with G2 Series Turbine Flowmeters. Features 2-Wires and Belden Shielded.



FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH 113265-1
Compatible with the A1 and G2 series of low-flow turbine flow meters, this remote kit allows for the flexibility of isolating the flow sensor from a panel-mounted digital indicator or a control device. In addition, safely and successfully measure high and low-temperature fluids.



FLOMEC 113437-01 Conduit Adapter Kit 113437-01
The Conduit Adapter allows you to enclose wiring from the magnetic pickup. The kit includes a turbine meter cover with a 1 in. male NPT conduit fitting and screws for plastic or metal installation.



FLOMEC 11344001 510 Conversion Kit 11344001
This new kit combines the Conduit Adapter with a magnetic pickup to allow easy installation of the 510 Series Displays or Transmitters to a G2 Meter.



FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters 125080-1
Used with the Remote Kit, this part replaces the dust cover that houses the electronic display. This module provides a digital, open collector (NPN) output signal. Use this combination to communicate to a PLC or other piece of electronic equipment.



FLOMEC 901002-52 Computer O-Ring, G2 Series 901002-52
Spare O-Ring for your G2 series flowmeters.



FLOMEC 113435-10 Conditioned Signal Output Module 113435-10
Provides two digital signals: Open Collector or 6-volt Square Wave and can communicate with most process control devices. This kit can upgrade an existing FLOMEC meter or can be purchased with a new meter.



Poser une question sur le FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in

FLOMEC G2S07TQ9GMA Offers

Features

  • Operating Temperature: 0 to 140°F
  • Flow Range: 5 to 50 GPM
  • Frequency: 47 to 470 Hz at 5 to 50 GPM
  • Pressure Rating: Flange Rule
  • Stainless Steel

Applications

  • Water
  • Oil
  • Chemicals
  • Petroleum Products
  • Fuels
  • Lubricants
En savoir plus...

FLOMEC G2S07TQ9GMA Specifications

Design Type Turbine
Fitting 1in Tri Clover
Flow Range 2 to 20 GPM
Frequency 37 to 370 Hz at 2 to 20 GPM
Recommended Strainer Size 55 mesh
Display LCD - 09 Computer
Reads Gallons
Pressure Rating Limited by fitting size, clamp size & temperature
Cliquer ici pour toutes les spécifications du FLOMEC G2S07TQ9GMA

Le FLOMEC G2S07TQ9GMA comprend

  • FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in
datasheet pour le FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in manual pour le FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in manual pour le FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in.

FLOMEC 113275-10 FM-Approved Remote Assembly Kit for the A1/G2/TM/03 series 113275-10
Compatible with the A1, G2, TM, and 03 Series digital turbine meters, this remote assembly kit modifies the meters for applications in specialized situations, including remote indication and high/low fluid temperature metering. In addition, this kit comes with a sensor module, a dust cover assembly, and 10' (3 m) of cable.



FLOMEC 125066-500 Output Cable Kit, 100ft 125066-500
Flomec output cable kit for use with conditioned signal output module, 4-20mA module and pulse access module.



FLOMEC 113272-500 Remote Cable Kit, 100ft 113272-500
Flomec remote cable kit for use with G2 Series Turbine Flowmeters. Features 2-Wires and Belden Shielded.



FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH 113265-1
Compatible with the A1 and G2 series of low-flow turbine flow meters, this remote kit allows for the flexibility of isolating the flow sensor from a panel-mounted digital indicator or a control device. In addition, safely and successfully measure high and low-temperature fluids.



FLOMEC 113437-01 Conduit Adapter Kit 113437-01
The Conduit Adapter allows you to enclose wiring from the magnetic pickup. The kit includes a turbine meter cover with a 1 in. male NPT conduit fitting and screws for plastic or metal installation.



FLOMEC 11344001 510 Conversion Kit 11344001
This new kit combines the Conduit Adapter with a magnetic pickup to allow easy installation of the 510 Series Displays or Transmitters to a G2 Meter.



FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters 125080-1
Used with the Remote Kit, this part replaces the dust cover that houses the electronic display. This module provides a digital, open collector (NPN) output signal. Use this combination to communicate to a PLC or other piece of electronic equipment.



FLOMEC 901002-52 Computer O-Ring, G2 Series 901002-52
Spare O-Ring for your G2 series flowmeters.



FLOMEC 113435-10 Conditioned Signal Output Module 113435-10
Provides two digital signals: Open Collector or 6-volt Square Wave and can communicate with most process control devices. This kit can upgrade an existing FLOMEC meter or can be purchased with a new meter.



Poser une question sur le FLOMEC G2S07TQ9GMA Stainless Steel Tri-Clover Sanitary Flowmeter, 2-20 GPM, 3/4in

Plus de produits FLOMEC



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.