Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

3997 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

3997 COMMENTAIRES

FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1"

Modèle: G2A10NQ9GMA

FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1"-

Télécharger: datasheet manual

Plus de produits FLOMEC

Demander à un expert

FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1"

Modèle: G2A10NQ9GMA

This Aluminum 1" flowmeter comes with NPT fittings, the 09 Computer, and is calibrated to read gallons per minute (GPM). Lightweight and compact design allows for easy installation. Internal parts are simple to replace.

This Aluminum 1" flowmeter comes with NPT fittings, the 09 Computer, and is calibrated to read gallons per minute (GPM). Lightweight and compact design allows for easy installation. Internal parts are simple to replace.

Prix spécial $992.81 CAD
Prix régulier $1091.00 CAD
Disponibilité 2 à 3 semaines
Quantité

Accessoires recommandées

FLOMEC 125066-500 Output Cable Kit, 100ft-

FLOMEC 125066-500 Output Cable Kit, 100ft

125066-500

FLOMEC 113272-500 Remote Cable Kit, 100ft-

FLOMEC 113272-500 Remote Cable Kit, 100ft

113272-500

FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters-

FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters

125080-1

FLOMEC 11344001 510 Conversion Kit-

FLOMEC 11344001 510 Conversion Kit

11344001

FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH-

FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH

113265-1

FLOMEC G2A10NQ9GMA Offers

Features

  • High precision, durable and compact turbine flow meters
  • Modular design allows for use with output modules, sensors and remote transmitters
  • Internal parts are simple to replace for easy maintenance
  • Lightweight, compact design allows for easy installation
  • Ceramic bearings, tungsten carbide shaft, PVDF rotor and 316 stainless steel rings
  • 565 ppg typical K-factor
  • Electronic choice - 2 button computer, field configurable (2 totals, 2 calibrations, rate)

FLOMEC G2A10NQ9GMA Specifications

Design Type Turbine
Fitting 1in NPT
Flow Range 5 to 50 GPM
Frequency 47 to 470 Hz at 5 to 50 GPM
Recommended Strainer Size 55 mesh
Display LCD - 09 Computer
Reads Gallons
Pressure Rating 300 PSI and 21 Bar
Cliquer ici pour toutes les spécifications du FLOMEC G2A10NQ9GMA

Le FLOMEC G2A10NQ9GMA comprend

  • FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1"
datasheet pour le FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1" manual pour le FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1" manual pour le FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1"

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1".

FLOMEC 113275-10 FM-Approved Remote Assembly Kit for the A1/G2/TM/03 series 113275-10
Compatible with the A1, G2, TM, and 03 Series digital turbine meters, this remote assembly kit modifies the meters for applications in specialized situations, including remote indication and high/low fluid temperature metering. In addition, this kit comes with a sensor module, a dust cover assembly, and 10' (3 m) of cable.



FLOMEC 125066-500 Output Cable Kit, 100ft 125066-500
Flomec output cable kit for use with conditioned signal output module, 4-20mA module and pulse access module.



FLOMEC 113272-500 Remote Cable Kit, 100ft 113272-500
Flomec remote cable kit for use with G2 Series Turbine Flowmeters. Features 2-Wires and Belden Shielded.



FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH 113265-1
Compatible with the A1 and G2 series of low-flow turbine flow meters, this remote kit allows for the flexibility of isolating the flow sensor from a panel-mounted digital indicator or a control device. In addition, safely and successfully measure high and low-temperature fluids.



FLOMEC 113437-01 Conduit Adapter Kit 113437-01
The Conduit Adapter allows you to enclose wiring from the magnetic pickup. The kit includes a turbine meter cover with a 1 in. male NPT conduit fitting and screws for plastic or metal installation.



FLOMEC 11344001 510 Conversion Kit 11344001
This new kit combines the Conduit Adapter with a magnetic pickup to allow easy installation of the 510 Series Displays or Transmitters to a G2 Meter.



FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters 125080-1
Used with the Remote Kit, this part replaces the dust cover that houses the electronic display. This module provides a digital, open collector (NPN) output signal. Use this combination to communicate to a PLC or other piece of electronic equipment.



FLOMEC 901002-52 Computer O-Ring, G2 Series 901002-52
Spare O-Ring for your G2 series flowmeters.



FLOMEC 113435-10 Conditioned Signal Output Module 113435-10
Provides two digital signals: Open Collector or 6-volt Square Wave and can communicate with most process control devices. This kit can upgrade an existing FLOMEC meter or can be purchased with a new meter.



Poser une question sur le FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1"

FLOMEC G2A10NQ9GMA Offers

Features

  • High precision, durable and compact turbine flow meters
  • Modular design allows for use with output modules, sensors and remote transmitters
  • Internal parts are simple to replace for easy maintenance
  • Lightweight, compact design allows for easy installation
  • Ceramic bearings, tungsten carbide shaft, PVDF rotor and 316 stainless steel rings
  • 565 ppg typical K-factor
  • Electronic choice - 2 button computer, field configurable (2 totals, 2 calibrations, rate)
En savoir plus...

FLOMEC G2A10NQ9GMA Specifications

Design Type Turbine
Fitting 1in NPT
Flow Range 5 to 50 GPM
Frequency 47 to 470 Hz at 5 to 50 GPM
Recommended Strainer Size 55 mesh
Display LCD - 09 Computer
Reads Gallons
Pressure Rating 300 PSI and 21 Bar
Cliquer ici pour toutes les spécifications du FLOMEC G2A10NQ9GMA

Le FLOMEC G2A10NQ9GMA comprend

  • FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1"
datasheet pour le FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1" manual pour le FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1" manual pour le FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1"

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1".

FLOMEC 113275-10 FM-Approved Remote Assembly Kit for the A1/G2/TM/03 series 113275-10
Compatible with the A1, G2, TM, and 03 Series digital turbine meters, this remote assembly kit modifies the meters for applications in specialized situations, including remote indication and high/low fluid temperature metering. In addition, this kit comes with a sensor module, a dust cover assembly, and 10' (3 m) of cable.



FLOMEC 125066-500 Output Cable Kit, 100ft 125066-500
Flomec output cable kit for use with conditioned signal output module, 4-20mA module and pulse access module.



FLOMEC 113272-500 Remote Cable Kit, 100ft 113272-500
Flomec remote cable kit for use with G2 Series Turbine Flowmeters. Features 2-Wires and Belden Shielded.



FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH 113265-1
Compatible with the A1 and G2 series of low-flow turbine flow meters, this remote kit allows for the flexibility of isolating the flow sensor from a panel-mounted digital indicator or a control device. In addition, safely and successfully measure high and low-temperature fluids.



FLOMEC 113437-01 Conduit Adapter Kit 113437-01
The Conduit Adapter allows you to enclose wiring from the magnetic pickup. The kit includes a turbine meter cover with a 1 in. male NPT conduit fitting and screws for plastic or metal installation.



FLOMEC 11344001 510 Conversion Kit 11344001
This new kit combines the Conduit Adapter with a magnetic pickup to allow easy installation of the 510 Series Displays or Transmitters to a G2 Meter.



FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters 125080-1
Used with the Remote Kit, this part replaces the dust cover that houses the electronic display. This module provides a digital, open collector (NPN) output signal. Use this combination to communicate to a PLC or other piece of electronic equipment.



FLOMEC 901002-52 Computer O-Ring, G2 Series 901002-52
Spare O-Ring for your G2 series flowmeters.



FLOMEC 113435-10 Conditioned Signal Output Module 113435-10
Provides two digital signals: Open Collector or 6-volt Square Wave and can communicate with most process control devices. This kit can upgrade an existing FLOMEC meter or can be purchased with a new meter.



Poser une question sur le FLOMEC G2A10NQ9GMA Turbine Aluminum Flowmeter, 5-50 GPM, 1"

Plus de produits FLOMEC



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.