EMIT 50766 Smartlog V5 without Software

Modèle: 50766

EMIT 50766 Smartlog V5 without Software

Modèle: 50766

This system is designed for fast, frequent and accurate testing of electrostatic discharge of personnel grounding items.

This system is designed for fast, frequent and accurate testing of electrostatic discharge of personnel grounding items.

Discontinué!

Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :

Emit 50180 Smartlog Pro 2-

Emit 50180 Smartlog Pro 2

Modèle: 50180

SmartLog Pro® Manager automates the collection of ESD personnel grounding tests and maintains records for a Compliance Verification Plan as required by ANSI/ESD


EMIT 50766 Offers

Features

  • May be used as a stand alone or networked tester
  • Improved stainless steel enclosure; barcode scanner accommodates larger/wider employee badges
  • Wrist Strap Test Limit; 750 kilohm low wrist strap test limit added for ANSI/ESD S20.20 conformance
  • Embedded Ethernet module for network communication
  • Embedded CCD barcode scanner
  • Foot plate detection circuit
  • Improved relay activation speed
  • Multiple test options available:
    • wrist strap only
    • footwear only
    • wrist strap and footwear
    • wrist strap or footwear
    • user choice
    • footwear with wrist strap optional
  • Independently tests the resistance path limits of a worn wrist strap and both worn ESD footwear within 2 seconds
  • Enforces test requirements specific to the operator

EMIT 50766 Specifications

SMARTLOG V5™ Operating Voltage 100-240 VAC, 50/60 Hz
Operating Temperature 70°F to 85°F (21°C to 30°C) for 1 Gigohm test limit
41°F to 85°F (5°C to 30°C) for all other test limits
Environmental Requirements Indoor use only at altitudes less than 6500 ft. (2km)
Maximum relative humidity of 80% up to 85°F (30°C) decreasing linearly to 50% @ 85°F (30°C)
Maximum relative humidity of 50% at 1 Gigohm setting
Dimensions 7.9" x 5.8" x 1.9" (20.1cm x 14.7cm x 4.8cm)
Weight 2.0 lbs (0.9 kg)
Test Accuracy ±20% for 1 gigohm footwear test limit
±10% for all other test limits
Test Switch Voltage 5 VDC @ open circuit
Wrist Strap and Footwear Test Voltage 30 VDC @ open circuit
Test current is limited by resistors and varies on the test range setting (100 kilohms - 1 gigohm)
Memory Capacity*
Test ID Length Test Transactions
4 16,100
5 15,300
6 14,600
7 14,000
8 13,400
9 12,900
10 12,400
11 11,900
12 11,500
13 11,100
14 10,700
15 10,400
16 10,100
*This only applies should the SmartLog V5 lose communication with the TEAM5 Software. Test transactions are automatically polled from the SmartLog's memory when connected to TEAM5
DUAL INDEPENDENT FOOT PLATE Dimensions 14.0" x 16.0" x 0.9" (35.6cm x 40.1cm x 2.3cm)
Weight 7.5 lbs (3.4 kg)

What's Included with the EMIT 50766

  • EMIT 50766 SmartLog V5™, without software
  • Mounting Bracket
  • Dual Independent Foot Plate
  • Foot Plate Cable, 6'
  • Right Angle Ground Cord
  • 2 Mounting Anchors
  • 2 Mounting Screws
  • Thumb Screw
  • 10mm Wrist Cord Adapter (50769 only)
  • Certificate of Calibration
  • Power Adapter, 9VDC 1.25A center pos.

Poser une question sur le EMIT 50766 Smartlog V5 without Software

EMIT 50766 Offers

Features

  • May be used as a stand alone or networked tester
  • Improved stainless steel enclosure; barcode scanner accommodates larger/wider employee badges
  • Wrist Strap Test Limit; 750 kilohm low wrist strap test limit added for ANSI/ESD S20.20 conformance
  • Embedded Ethernet module for network communication
  • Embedded CCD barcode scanner
  • Foot plate detection circuit
  • Improved relay activation speed
  • Multiple test options available:
    • wrist strap only
    • footwear only
    • wrist strap and footwear
    • wrist strap or footwear
    • user choice
    • footwear with wrist strap optional
  • Independently tests the resistance path limits of a worn wrist strap and both worn ESD footwear within 2 seconds
  • Enforces test requirements specific to the operator

EMIT 50766 Specifications

SMARTLOG V5™ Operating Voltage 100-240 VAC, 50/60 Hz
Operating Temperature 70°F to 85°F (21°C to 30°C) for 1 Gigohm test limit
41°F to 85°F (5°C to 30°C) for all other test limits
Environmental Requirements Indoor use only at altitudes less than 6500 ft. (2km)
Maximum relative humidity of 80% up to 85°F (30°C) decreasing linearly to 50% @ 85°F (30°C)
Maximum relative humidity of 50% at 1 Gigohm setting
Dimensions 7.9" x 5.8" x 1.9" (20.1cm x 14.7cm x 4.8cm)
Weight 2.0 lbs (0.9 kg)
Test Accuracy ±20% for 1 gigohm footwear test limit
±10% for all other test limits
Test Switch Voltage 5 VDC @ open circuit
Wrist Strap and Footwear Test Voltage 30 VDC @ open circuit
Test current is limited by resistors and varies on the test range setting (100 kilohms - 1 gigohm)
Memory Capacity*
Test ID Length Test Transactions
4 16,100
5 15,300
6 14,600
7 14,000
8 13,400
9 12,900
10 12,400
11 11,900
12 11,500
13 11,100
14 10,700
15 10,400
16 10,100
*This only applies should the SmartLog V5 lose communication with the TEAM5 Software. Test transactions are automatically polled from the SmartLog's memory when connected to TEAM5
DUAL INDEPENDENT FOOT PLATE Dimensions 14.0" x 16.0" x 0.9" (35.6cm x 40.1cm x 2.3cm)
Weight 7.5 lbs (3.4 kg)

What's Included with the EMIT 50766

  • EMIT 50766 SmartLog V5™, without software
  • Mounting Bracket
  • Dual Independent Foot Plate
  • Foot Plate Cable, 6'
  • Right Angle Ground Cord
  • 2 Mounting Anchors
  • 2 Mounting Screws
  • Thumb Screw
  • 10mm Wrist Cord Adapter (50769 only)
  • Certificate of Calibration
  • Power Adapter, 9VDC 1.25A center pos.

Poser une question sur le EMIT 50766 Smartlog V5 without Software